Fuel Injector Clinic 650cc Fuel Injector Set - High Z (is135-0650h) - 1991 - 1999 Mitsubishi 3000GT
Upgrade the fuel system in your 1991 - 1999 Mitsubishi 3000GT with the Fuel Injector Clinic 650cc High-Z Fuel Injector Set. Part number is135-0650h includes six saturated, high-impedance ball and seat injectors engineered for excellent linearity, short pulse width repeatability, and consistent fuel delivery. For modified 3000GT builds that need additional injector capacity, this matched 650cc set provides increased fuel flow while retaining the precise control needed for accurate tuning and strong drivability.
Fuel Injector Clinic precisely matches each six-injector set using its proprietary Data Match Technology. Every injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI, or 3 Bar, with fuel temperature at 90 degrees F using CF-16B calibration fluid. PGTUSC6 solder-in pigtails are included for the required injector connector conversion, or optional PADPUtoJ6 plug-and-play adapters can be selected to connect the injectors without cutting or soldering the vehicle wiring harness.
Specifications
- Part Number: is135-0650h
- Injector Flow Rate: 650cc/min
- Quantity: Set of 6 injectors
- Application: 1991 - 1999 Mitsubishi 3000GT
- Injector Type: Saturated / High Impedance
- Injector Design: Ball and seat
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Injector Identification: Individually serial numbered
- Injector Data: Data Match Sheet with flow matching and latency information
- Test Pressure: 43.5 PSI / 3 Bar
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTUSC6
- Optional Plug-and-Play Adapters: PADPUtoJ6
- Wiring Requirement: Injector plug conversion required when using the included pigtails
- Seals: Includes O-rings required for the listed factory application
- Injector Condition: Brand-new, unused injectors
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 650cc/min High-Z fuel injectors for 1991 - 1999 Mitsubishi 3000GT applications
- Increased fuel-flow capability for modified and performance-oriented 3000GT builds
- Saturated, high-impedance ball and seat injector construction
- Excellent linearity for consistent and predictable fuel delivery
- Superior short pulse width control and repeatability for precise low-load fueling
- Proprietary Data Match Technology precisely matches the injectors within the set
- Each injector is individually serial numbered for identification and matching data
- Detailed Data Match Sheet provides flow matching and latency information for ECU calibration
- Flow tested and rated at 43.5 PSI / 3 Bar and 90 degrees F using CF-16B calibration fluid
- Includes PGTUSC6 solder-in pigtails for injector plug conversion
- Optional PADPUtoJ6 plug-and-play adapters eliminate the need to cut or solder the vehicle wiring harness
- Includes O-rings required for the listed factory application
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Backed by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Precision Fuel Delivery for Performance 3000GT Builds
Additional injector capacity is only valuable when the ECU can accurately control the fuel being delivered. Fuel Injector Clinic's 650cc High-Z injectors combine increased flow capability with excellent linearity and superior short pulse width control, helping provide predictable fueling from low-load operation through higher-demand conditions. FIC's precise matching process further improves consistency across the six-injector set, giving tuners detailed data for building an accurate calibration.
Part number is135-0650h requires an injector plug conversion when using the included PGTUSC6 pigtails. These pigtails can be soldered into the vehicle harness to replace the existing injector connectors. For owners who prefer not to cut or solder the factory wiring, optional PADPUtoJ6 plug-and-play adapters provide an alternative installation solution. FIC uses brand-new, unused injectors for its performance applications rather than remanufactured or core-program injectors. If your 3000GT uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to confirm proper fitment.
Fitment
- 1991 Mitsubishi 3000GT
- 1992 Mitsubishi 3000GT
- 1993 Mitsubishi 3000GT
- 1994 Mitsubishi 3000GT
- 1995 Mitsubishi 3000GT
- 1996 Mitsubishi 3000GT
- 1997 Mitsubishi 3000GT
- 1998 Mitsubishi 3000GT
- 1999 Mitsubishi 3000GT
FAQs
Does the Fuel Injector Clinic is135-0650h injector set require wiring modifications?
Yes, when using the included PGTUSC6 pigtails, the existing injector plugs on the vehicle wiring harness must be replaced. Optional PADPUtoJ6 plug-and-play adapters can be selected instead, allowing the injectors to connect without cutting or soldering the factory wiring harness.
How are the FIC is135-0650h 650cc injectors matched and tested?
Fuel Injector Clinic precisely matches the six injectors using its proprietary Data Match Technology. Each injector is individually serial numbered, with flow matching and latency results supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI, or 3 Bar, with fuel temperature at 90 degrees F using CF-16B calibration fluid.
Order Your Fuel Injector Clinic Injectors from Beefcake Racing
Beefcake Racing is your source for Fuel Injector Clinic injectors and supporting performance fuel-system components for Mitsubishi 3000GT builds. Whether you are upgrading a modified street car or building a higher-output performance combination, proper injector sizing and calibration are critical to getting the fuel delivery, performance, and drivability your setup demands.
Have questions about injector sizing, wiring, or fitment? Contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
