Fuel Injector Clinic 1650cc Fuel Injector Set - High Z (is127-1650h) - 2008-2015 Mitsubishi Evo X
Step up the fueling capability of your 2008-2015 Mitsubishi Evo X with the Fuel Injector Clinic 1650cc High-Z Fuel Injector Set. Built for high-horsepower applications that demand serious fuel volume without giving up the control needed for street drivability, this set includes four 1650cc saturated, high impedance ball and seat injectors. Fuel Injector Clinic's 1650cc injector combines excellent idle performance and short pulse width control with the capacity needed for demanding builds running gasoline, E85, or race fuel.
Stainless alloy valve construction gives the 1650cc injector broad fuel compatibility, including pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Each set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology, and every injector is individually serial numbered with its results documented on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. PGTJETR4Q solder-in pigtails are included, while optional PADPJtoD4 plug-and-play adapters allow installation without cutting or soldering the factory harness. Each injector is also covered against failure caused by defects in original manufacture by Fuel Injector Clinic's lifetime warranty.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is127-1650h
- Application: Mitsubishi Evo X
- Injector Flow Rate: 1650cc/min
- Injector Quantity: 4
- Injector Type: Saturated ball and seat
- Impedance: High-Z / high impedance
- Valve Construction: Stainless alloy
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Included Wiring Pigtails: PGTJETR4Q
- Optional Plug-and-Play Adapters: PADPJtoD4
- O-Rings: Included for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 1650cc high impedance fuel injectors for the 2008-2015 Mitsubishi Evo X
- High-flow design suited for higher-horsepower gasoline and E85 applications
- Excellent idle performance for street-driven performance vehicles
- Stainless alloy valve construction provides broad fuel compatibility
- Compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Proprietary Data Match Technology provides precise injector matching
- Each injector is individually serial numbered
- Included Data Match Sheet provides detailed flow matching and latency information
- Superior short pulse width control helps provide excellent tunability and drivability
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid
- Includes the O-rings required for the listed factory application
- Includes PGTJETR4Q solder-in wiring pigtails
- Optional PADPJtoD4 plug-and-play adapters provide a no-cut, no-solder wiring solution
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Wiring and Installation
The Fuel Injector Clinic is127-1650h injector set requires a change to the injector plugs on the Evo X wiring harness. PGTJETR4Q pigtails are included and can be soldered into the harness to replace the existing injector plugs. For an installation that does not require cutting or soldering the factory harness, optional PADPJtoD4 plug-and-play adapters can be added.
Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. If your Evo X uses an aftermarket fuel rail or another non-standard fuel system configuration, contact Beefcake Racing before ordering to confirm the correct injector setup for your application.
Fitment
- 2008 Mitsubishi Lancer Evolution X
- 2009 Mitsubishi Lancer Evolution X
- 2010 Mitsubishi Lancer Evolution X
- 2011 Mitsubishi Lancer Evolution X
- 2012 Mitsubishi Lancer Evolution X
- 2013 Mitsubishi Lancer Evolution X
- 2014 Mitsubishi Lancer Evolution X
- 2015 Mitsubishi Lancer Evolution X
FAQs
What fuels can the Fuel Injector Clinic is127-1650h injectors be used with?
The stainless alloy valve construction provides broad fuel compatibility. Fuel Injector Clinic specifies the 1650cc High-Z injector for use with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels.
Do the Fuel Injector Clinic 1650cc injectors require a wiring change on the Evo X?
Yes. PGTJETR4Q solder-in pigtails are included with the injector set. Optional PADPJtoD4 plug-and-play adapters are available for owners who want to connect the injectors without cutting or soldering the factory wiring harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and the supporting fuel system components needed to build a properly matched performance setup. Whether your Evo X is a street-driven performance car or a high-horsepower build requiring substantially more fuel capacity, our team can help you choose the right injectors and wiring solution for your combination. Have questions about the Fuel Injector Clinic is127-1650h injector set? Email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
