Fuel Injector Clinic 1440cc Fuel Injector Set - High Z (is127-1440h) - 2008-2015 Mitsubishi Evo X
Upgrade the fuel system in your 2008-2015 Mitsubishi Evo X with the Fuel Injector Clinic 1440cc High-Z Fuel Injector Set, a strong choice for performance builds that need significantly more fuel capacity while retaining the control and drivability expected from a street-driven car. This set includes four 1440cc saturated, high impedance ball and seat injectors and fills the performance range between Fuel Injector Clinic's 1200cc and 1650cc offerings. Excellent idle characteristics, superior short pulse width control, and precise matching make the is127-1440h well suited for higher-horsepower Evo X combinations running gasoline, E85, or race fuel.
Stainless alloy valve construction gives these 1440cc injectors broad fuel compatibility, including pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Each injector is individually serial numbered and precisely matched using Fuel Injector Clinic's proprietary Data Match Technology, with detailed flow matching and latency information supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. PGTUSC4 solder-in pigtails are included, while optional PADPUtoD4 plug-and-play adapters provide an installation option that does not require cutting or soldering the factory harness. Each injector is covered against failure caused by defects in original manufacture by Fuel Injector Clinic's lifetime warranty.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is127-1440h
- Application: Mitsubishi Evo X
- Injector Flow Rate: 1440cc/min
- Injector Quantity: 4
- Injector Type: Saturated ball and seat
- Impedance: High-Z / high impedance
- Valve Construction: Stainless alloy
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Included Wiring Pigtails: PGTUSC4
- Optional Plug-and-Play Adapters: PADPUtoD4
- O-Rings: Included for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 1440cc high impedance fuel injectors for the 2008-2015 Mitsubishi Evo X
- Fits between Fuel Injector Clinic's 1200cc and 1650cc injector offerings for a balanced step in fueling capacity
- Saturated, high impedance ball and seat injector design
- Excellent idle performance for street-driven performance applications
- Supports higher-horsepower combinations running E85 or gasoline
- Stainless alloy valve construction provides broad fuel compatibility
- Compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Fuel Injector Clinic Data Match Technology provides precise injector matching
- Each injector is individually serial numbered
- Included Data Match Sheet provides detailed flow matching and latency information
- Superior short pulse width control helps provide excellent tunability and drivability
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid
- Includes the O-rings required for the listed factory application
- Includes PGTUSC4 solder-in wiring pigtails
- Optional PADPUtoD4 plug-and-play adapters provide a no-cut, no-solder wiring solution
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Wiring and Installation
The Fuel Injector Clinic is127-1440h injector set requires a change to the injector plugs on the Evo X wiring harness. PGTUSC4 pigtails are included and can be soldered into the harness to replace the existing injector plugs. Optional PADPUtoD4 plug-and-play adapters can be added for an installation that does not require cutting or soldering the factory wiring harness.
Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than remanufactured or core-program injectors. If your Evo X uses an aftermarket fuel rail or another non-standard fuel system configuration, contact Beefcake Racing before ordering to confirm the proper injector setup for your application.
Fitment
- 2008 Mitsubishi Lancer Evolution X
- 2009 Mitsubishi Lancer Evolution X
- 2010 Mitsubishi Lancer Evolution X
- 2011 Mitsubishi Lancer Evolution X
- 2012 Mitsubishi Lancer Evolution X
- 2013 Mitsubishi Lancer Evolution X
- 2014 Mitsubishi Lancer Evolution X
- 2015 Mitsubishi Lancer Evolution X
FAQs
What fuels can the Fuel Injector Clinic is127-1440h injectors be used with?
Fuel Injector Clinic's 1440cc High-Z injectors use stainless alloy valve construction and are compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. This broad compatibility makes them suitable for Evo X builds using a wide range of performance fuels.
Do the Fuel Injector Clinic 1440cc injectors require a wiring change on the Evo X?
Yes. PGTUSC4 solder-in pigtails are included with the injector set. Optional PADPUtoD4 plug-and-play adapters are available for owners who want to install the injectors without cutting or soldering the factory wiring harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and the supporting fuel system components needed for properly matched performance builds. Whether your Evo X is a street-driven performance car or a higher-horsepower E85 or race-fuel combination, our team can help you select the right injectors and wiring solution for your setup. Have questions about the Fuel Injector Clinic is127-1440h injector set? Email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
