Fuel Injector Clinic 1200cc (Previously 1100cc) Fuel Injector Set - High Z (is127-1200h) - 2008 - 2015 Mitsubishi Evo X
Upgrade the fuel system in your 2008 - 2015 Mitsubishi Evo X with the Fuel Injector Clinic 1200cc High-Z Fuel Injector Set. Part number is127-1200h includes four 1200cc saturated, high-impedance ball and seat injectors engineered to provide the substantial fuel capacity demanded by modified Evo X builds while maintaining the precise control needed for predictable tuning and strong drivability. FIC combines advanced injector technology with proprietary Data Match Technology and superior short pulse width control, making this set a serious fueling upgrade for higher-output street, track, and competition applications.
Fuel Injector Clinic precisely matches each four-injector set using its proprietary Data Match Technology. Every injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. FIC flow tests and rates these injectors at 43.5 PSI, or 3 Bar, with fuel temperature at 90 degrees F using CF-16B calibration fluid. PGTJETR4Q solder-in pigtails are included for the required injector connector conversion, while optional PADPJtoD4 plug-and-play adapters provide an installation option without cutting or soldering the vehicle wiring harness.
Specifications
- Part Number: is127-1200h
- Previous Part Number: is127-1100h
- Injector Flow Rate: 1200cc/min
- Quantity: Set of 4 injectors
- Application: 2008 - 2015 Mitsubishi Evo X
- Injector Type: Saturated / High Impedance
- Injector Design: Ball and seat
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Injector Identification: Individually serial numbered
- Injector Data: Data Match Sheet with flow matching and latency information
- Test Pressure: 43.5 PSI / 3 Bar
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTJETR4Q
- Optional Plug-and-Play Adapters: PADPJtoD4
- Wiring Requirement: Injector plug conversion required when using the included pigtails
- Seals: Includes O-rings required for the listed factory application
- Injector Condition: Brand-new, unused injectors
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 1200cc/min High-Z fuel injectors for 2008 - 2015 Mitsubishi Evo X applications
- Saturated, high-impedance ball and seat injector construction
- Substantial fuel-flow capacity for modified and higher-output Evo X builds
- Proprietary Data Match Technology precisely matches the complete four-injector set
- Each injector individually serial numbered for identification and matching data
- Detailed Data Match Sheet provides flow matching and latency information for ECU calibration
- Superior short pulse width control helps provide accurate fueling at idle and part throttle
- State-of-the-art matching supports predictable tuning and excellent drivability
- Flow tested and rated at 43.5 PSI / 3 Bar at 90 degrees F using CF-16B calibration fluid
- Includes PGTJETR4Q solder-in pigtails for injector connector conversion
- Optional PADPJtoD4 plug-and-play adapters eliminate the need to cut or solder the vehicle wiring harness
- Includes O-rings required for the listed factory application
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Current 1200cc version replaces the previous is127-1100h injector set
- Backed by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
1200cc Fuel Capacity with Precise Injector Control
Making serious power with an Evo X requires injectors that can deliver the necessary fuel volume without becoming difficult to control during normal driving. Idle, cruising, and part-throttle operation require accurate fueling at much shorter injector pulse widths than wide-open throttle. FIC's 1200cc High-Z injectors combine substantial flow capability with superior short pulse width control and precise Data Match Technology, giving tuners predictable injector behavior across the engine's operating range.
Data Matched for Consistent Fuel Delivery
FIC's Data Match Technology goes beyond simply supplying four injectors with the same nominal flow rating. Each injector is individually serial numbered, and detailed flow matching and latency information is provided on the included Data Match Sheet. This application-specific injector data gives tuners valuable information for calibration while helping maintain balanced, consistent fuel delivery across all four cylinders.
Part number is127-1200h includes PGTJETR4Q solder-in pigtails for the required injector connector conversion. These pigtails can be installed in place of the existing injector connectors on the vehicle wiring harness. For an installation that does not require cutting or soldering the factory harness, optional PADPJtoD4 plug-and-play adapters can be selected instead. FIC uses brand-new, unused injectors for its performance applications rather than remanufactured or core-program injectors. If your Evo X uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to confirm proper fitment.
Fitment
- 2008 Mitsubishi Evo X
- 2009 Mitsubishi Evo X
- 2010 Mitsubishi Evo X
- 2011 Mitsubishi Evo X
- 2012 Mitsubishi Evo X
- 2013 Mitsubishi Evo X
- 2014 Mitsubishi Evo X
- 2015 Mitsubishi Evo X
FAQs
Does the Fuel Injector Clinic is127-1200h require an injector connector conversion?
Yes. The is127-1200h includes PGTJETR4Q solder-in pigtails that can be used to replace the existing injector connectors on the vehicle wiring harness. Optional PADPJtoD4 plug-and-play adapters can be selected instead, allowing the injectors to connect without cutting or soldering the factory wiring harness.
Is the is127-1200h the replacement for the previous is127-1100h Evo X injector set?
Yes. Fuel Injector Clinic identifies the current 1200cc is127-1200h as the replacement for the injector set previously sold under part number is127-1100h. The current product should be ordered and referenced using part number is127-1200h.
Order Your Fuel Injector Clinic Injectors from Beefcake Racing
Beefcake Racing is your source for Fuel Injector Clinic injectors and supporting performance fuel-system components for Mitsubishi Evo X builds. The FIC 1200cc High-Z set combines serious fuel capacity, precise Data Match Technology, excellent short pulse width control, and flexible wiring options for performance combinations where consistent fuel delivery and tunability matter.
Have questions about injector sizing, wiring, tuning, installation, or fitment? Contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
