Fuel Injector Clinic 1000cc Fuel Injector Set - High Z (is127-1000h) - 2008-2015 Mitsubishi Evo X
Give your 2008-2015 Mitsubishi Evo X the fuel delivery and precise injector control demanded by a serious performance build with the Fuel Injector Clinic 1000cc High-Z Fuel Injector Set. Designed specifically for the Evo X, this four-injector set uses modified saturated, high impedance ball and seat injectors engineered for excellent short pulse width control, consistent fueling, and strong drivability. Fuel Injector Clinic's proprietary Data Match Technology provides the precise injector matching tuners need when dialing in a modified Evo X, making this set an excellent upgrade for applications that require increased fueling capacity without sacrificing low-pulse-width control.
Each injector is individually serial numbered and supplied with detailed matching and latency information on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel maintained at 90 degrees F using CF-16B calibration fluid. Fuel Injector Clinic supplies the injectors configured with the O-rings required for the listed factory application. PGTUSC4 solder-in pigtails are included because this injector set requires an injector plug change, while optional PADPUtoD4 plug-and-play adapters provide an installation solution that does not require cutting or soldering the factory harness. Fuel Injector Clinic uses brand-new, unused injectors rather than remanufactured or core-based injectors, and each injector is covered against failure caused by defects in original manufacture by a lifetime warranty.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is127-1000h
- Injector Flow Rate: 1000cc
- Injector Quantity: 4
- Injector Type: Modified saturated ball and seat
- Impedance: High-Z / high impedance
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Included Wiring Pigtails: PGTUSC4
- Optional Plug-and-Play Adapters: PADPUtoD4
- O-Rings: Included for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 1000cc high impedance fuel injectors for the 2008-2015 Mitsubishi Evo X
- Modified saturated ball and seat injector design
- Fuel Injector Clinic Data Match Technology for precise injector matching
- Each injector is individually serial numbered
- Detailed Data Match Sheet provides matching and latency information
- Superior short pulse width control for excellent tunability and drivability
- Flow tested at 43.5 PSI (3 Bar) and 90 degrees F using CF-16B calibration fluid
- Configured with the O-rings required for the factory Evo X application
- Includes PGTUSC4 pigtails for injector plug conversion
- Optional PADPUtoD4 plug-and-play adapters eliminate the need to cut or solder the factory harness
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Wiring and Installation
This injector set requires a change to the injector plugs on the vehicle's wiring harness. The included PGTUSC4 pigtails can be soldered into the harness to replace the existing injector plugs. For a no-cut, no-solder solution, optional PADPUtoD4 plug-and-play adapters can be used to connect the injectors to the factory-style harness plugs.
For aftermarket fuel rails or other non-standard installations, contact Beefcake Racing before ordering to confirm the correct injector configuration for your setup.
Fitment
- 2008 Mitsubishi Lancer Evolution X
- 2009 Mitsubishi Lancer Evolution X
- 2010 Mitsubishi Lancer Evolution X
- 2011 Mitsubishi Lancer Evolution X
- 2012 Mitsubishi Lancer Evolution X
- 2013 Mitsubishi Lancer Evolution X
- 2014 Mitsubishi Lancer Evolution X
- 2015 Mitsubishi Lancer Evolution X
FAQs
Do the Fuel Injector Clinic is127-1000h injectors require a wiring change on the Evo X?
Yes. The set includes PGTUSC4 pigtails that can be soldered into the vehicle's wiring harness. Optional PADPUtoD4 plug-and-play adapters are available for an installation that does not require cutting or soldering the factory harness.
How are these Fuel Injector Clinic 1000cc injectors matched and tested?
Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the injector set. Each injector is individually serial numbered, with detailed matching and latency information supplied on the Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and performance fuel system components. If you have questions about the is127-1000h injector set, wiring adapter options, or your Mitsubishi Evo X setup, our performance specialists are ready to help. Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
