Fuel Injector Clinic 2150cc High-Z Fuel Injector Set (is119-2150h) - 2004-2017 Honda J-Series
Fuel a serious 2004-2017 Honda J-Series build with the massive capacity and precise injector control of the Fuel Injector Clinic 2150cc High-Z Fuel Injector Set. Part number is119-2150h includes six 2150cc/min saturated, high-impedance injectors engineered for extreme-performance J-Series applications. These injectors are an excellent choice for E85 and other compatible high-volume fuels, delivering the fuel capacity demanded by high-horsepower combinations while maintaining the low-pulse-width control needed for responsive idle and part-throttle operation.
Controlling a 2150cc injector takes more than raw flow capacity. Fuel Injector Clinic uses its proprietary Data Match Technology dynamic flow matching during production to significantly improve ECU control in the sub-2ms pulse width range commonly encountered at idle and part throttle. Every injector is individually serial numbered, and its results are documented on the supplied Data Match Sheet with detailed flow-matching and latency information. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) using CF-16B calibration fluid maintained at 90 degrees F. The result is an extreme-capacity injector set engineered to combine serious fuel delivery with the control and consistency required for accurate tuning.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is119-2150h
- Application: 2004-2017 Honda J-Series
- Injector Quantity: 6
- Flow Rating: 2150cc/min
- Impedance: High impedance / High-Z
- Operation: Saturated
- Injector Matching: Fuel Injector Clinic Data Match Technology dynamic flow matching
- Testing Pressure: 43.5 PSI (3 Bar)
- Testing Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Fuel Compatibility: E85 and other compatible high-volume fuels
- MTBE Fuel Compatibility: Not compatible with VP Import, Q16, or other MTBE oxygenated fuels
- Included Pigtails: PGTDEN6
- Optional Plug-and-Play Adaptors: PADPDtoH6
- O-Rings: Included for the intended application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six massive 2150cc/min high-performance fuel injectors
- Engineered for 2004-2017 Honda J-Series applications
- Saturated, high-impedance injector design
- Excellent choice for E85 and other compatible high-volume fuels
- Fuel Injector Clinic Data Match Technology provides dynamic flow matching for these large-flow injectors
- Dynamic matching significantly improves ECU control in the sub-2ms pulse width range
- Superior short pulse width control supports responsive idle and part-throttle operation
- Each injector is individually serial numbered
- Data Match Sheet provides detailed flow-matching and latency information
- State-of-the-art matching provides a consistent foundation for accurate calibration
- Flow tested at 43.5 PSI and 90 degrees F using CF-16B calibration fluid
- Includes the O-rings required for the intended application
- Includes PGTDEN6 solder-in pigtails for injector connector conversion
- Optional PADPDtoH6 plug-and-play adaptors eliminate the need to cut or solder the factory harness
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Backed by Fuel Injector Clinic's lifetime warranty against failures caused by original manufacturing defects
Important Fuel Compatibility and Care Information
DO NOT use the is119-2150h injectors with VP Import, Q16, or other MTBE oxygenated fuels. The internal construction of this 2150cc/min injector contains a seal that has been found to swell when exposed to MTBE. This swelling can significantly reduce injector flow, making the injector unsuitable for MTBE oxygenated fuels. These injectors are suitable for E85, but Fuel Injector Clinic's care instructions should be followed because prolonged disuse while alcohol-based fuel remains in the injectors can create potential corrosion concerns.
Fitment
- 2004 Honda J-Series applications
- 2005 Honda J-Series applications
- 2006 Honda J-Series applications
- 2007 Honda J-Series applications
- 2008 Honda J-Series applications
- 2009 Honda J-Series applications
- 2010 Honda J-Series applications
- 2011 Honda J-Series applications
- 2012 Honda J-Series applications
- 2013 Honda J-Series applications
- 2014 Honda J-Series applications
- 2015 Honda J-Series applications
- 2016 Honda J-Series applications
- 2017 Honda J-Series applications
Fitment applies to compatible 2004-2017 Honda J-Series engine applications. If your combination uses an engine swap, aftermarket fuel rail, modified intake, or another unusual fuel system configuration, contact Beefcake Racing before ordering to verify proper injector fitment and electrical connection.
FAQs
Can Fuel Injector Clinic is119-2150h injectors be used with E85, Q16, or VP Import?
The is119-2150h is designed for E85 and other compatible high-volume fuels, but it must not be used with Q16, VP Import, or other MTBE oxygenated fuels. MTBE can cause an internal injector seal to swell and significantly reduce injector flow. When using E85 or another alcohol-based fuel, follow Fuel Injector Clinic's care instructions, particularly when the vehicle will be stored or unused for an extended period.
How can a 2150cc injector maintain good idle and part-throttle control?
Fuel Injector Clinic uses Data Match Technology dynamic flow matching to significantly improve ECU control of these large injectors in the sub-2ms pulse width range commonly encountered during idle and part-throttle operation. Combined with superior short pulse width control and detailed matching and latency data, this gives tuners the information and injector consistency needed to accurately control an extremely high-flow injector.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
A 2150cc injector belongs in a serious J-Series fuel system where injector sizing, fuel compatibility, electrical connections, fuel pressure, supporting hardware, and tuning all need to work together. Beefcake Racing can help you determine whether the Fuel Injector Clinic is119-2150h is the right choice for your 2004-2017 Honda J-Series performance build. For fitment, fuel compatibility, connector, or ordering assistance, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
