Fuel Injector Clinic 1650cc High-Z Fuel Injector Set (is119-1650h) - 2004-2017 Honda J-Series
Give your high-horsepower 2004-2017 Honda J-Series build the fuel capacity it needs without sacrificing the injector control required for a properly tuned street or race combination. The Fuel Injector Clinic 1650cc High-Z Fuel Injector Set, part number is119-1650h, includes six 1650cc/min saturated, high-impedance ball-and-seat injectors. With substantial flow capacity, excellent idle performance, and precise short pulse width control, these injectors are built to support serious horsepower on gasoline, E85, and compatible race fuels while maintaining the drivability expected from a well-calibrated J-Series.
The is119-1650h uses stainless alloy valve construction for broad fuel compatibility, including pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Each set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Every injector is individually serial numbered, with its results documented on the supplied Data Match Sheet to provide detailed flow-matching and latency information for accurate calibration. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) using CF-16B calibration fluid maintained at 90 degrees F. Superior short pulse width control and state-of-the-art matching help combine extreme fuel capacity with excellent tuning control and street drivability.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is119-1650h
- Application: 2004-2017 Honda J-Series
- Injector Quantity: 6
- Flow Rating: 1650cc/min
- Injector Type: Ball-and-seat
- Impedance: High impedance / High-Z
- Operation: Saturated
- Valve Construction: Stainless alloy
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Testing Pressure: 43.5 PSI (3 Bar)
- Testing Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTJETR6Q
- Optional Plug-and-Play Adaptors: PADPJtoH6
- O-Rings: Included for the intended application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 1650cc/min high-performance fuel injectors
- Engineered for 2004-2017 Honda J-Series applications
- Saturated, high-impedance ball-and-seat injector design
- High fuel capacity for serious horsepower applications
- Excellent idle performance in properly tuned street-driven vehicles
- Suitable for high-output gasoline and E85 combinations
- Stainless alloy valve construction provides broad fuel compatibility
- Compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Fuel Injector Clinic Data Match Technology provides precise injector-set matching
- Each injector is individually serial numbered
- Data Match Sheet provides detailed flow-matching and latency information
- Superior short pulse width control supports precise fueling at idle and part throttle
- State-of-the-art matching helps provide consistent fuel delivery across all six cylinders
- Precise injector control helps simplify accurate tuning and maintain strong drivability
- Flow tested at 43.5 PSI and 90 degrees F using CF-16B calibration fluid
- Includes the O-rings required for the intended application
- Includes PGTJETR6Q solder-in pigtails for injector connector conversion
- Optional PADPJtoH6 plug-and-play adaptors allow connection without cutting or soldering the factory harness
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Backed by Fuel Injector Clinic's lifetime warranty against failures caused by original manufacturing defects
Fitment
- 2004 Honda J-Series applications
- 2005 Honda J-Series applications
- 2006 Honda J-Series applications
- 2007 Honda J-Series applications
- 2008 Honda J-Series applications
- 2009 Honda J-Series applications
- 2010 Honda J-Series applications
- 2011 Honda J-Series applications
- 2012 Honda J-Series applications
- 2013 Honda J-Series applications
- 2014 Honda J-Series applications
- 2015 Honda J-Series applications
- 2016 Honda J-Series applications
- 2017 Honda J-Series applications
Fitment applies to compatible 2004-2017 Honda J-Series engine applications. If your combination uses an engine swap, aftermarket fuel rail, modified intake, or another unusual fuel system configuration, contact Beefcake Racing before ordering to verify proper injector fitment and electrical connection.
FAQs
What fuels can be used with Fuel Injector Clinic is119-1650h injectors?
The stainless alloy valve construction gives the is119-1650h broad fuel compatibility. Fuel Injector Clinic specifies compatibility with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Unlike the FIC 2150cc injector, the 1650cc injector is compatible with MTBE oxygenated race fuels such as Q16 and VP Import.
Why choose the 1650cc FIC injector for a high-horsepower Honda J-Series?
The is119-1650h combines substantial fuel capacity with excellent idle performance, superior short pulse width control, and precise Data Match Technology matching. This makes it a strong choice for high-output J-Series builds that need significant fuel delivery while retaining the low-pulse-width control required for accurate tuning and street drivability.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Serious J-Series builds require the entire fuel system to work together. Injector capacity, fuel choice, fuel pressure, supporting fuel system hardware, electrical connections, and calibration all need to match the combination and horsepower goal. Beefcake Racing can help you determine whether the Fuel Injector Clinic is119-1650h is the right injector set for your 2004-2017 Honda J-Series build. For fitment, fuel system, connector, or ordering assistance, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
