Fuel Injector Clinic 1200cc High-Z Fuel Injector Set (is119-1200h) - 2004-2017 Honda J-Series
Step up the fuel capacity of your 2004-2017 Honda J-Series performance build with the Fuel Injector Clinic 1200cc High-Z Fuel Injector Set. Part number is119-1200h includes six 1200cc/min saturated, high-impedance ball-and-seat injectors engineered for Honda J-Series applications. Previously offered as is119-1100h, this current 1200cc set combines serious fuel delivery with the precise short pulse width control needed for accurate tuning, responsive part-throttle operation, and strong drivability in properly calibrated high-performance applications.
Each is119-1200h injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Every injector is individually serial numbered, and its results are documented on the supplied Data Match Sheet with detailed flow-matching and latency information for accurate calibration. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) using CF-16B calibration fluid maintained at 90 degrees F. Superior short pulse width control and state-of-the-art matching give tuners a consistent foundation for calibration while helping maintain predictable fuel delivery throughout the operating range.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is119-1200h
- Previous Part Number: is119-1100h
- Application: 2004-2017 Honda J-Series
- Injector Quantity: 6
- Flow Rating: 1200cc/min
- Injector Type: Ball-and-seat
- Impedance: High impedance / High-Z
- Operation: Saturated
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Testing Pressure: 43.5 PSI (3 Bar)
- Testing Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTJETR6Q
- Optional Plug-and-Play Adaptors: PADPJtoH6
- O-Rings: Included for the intended application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 1200cc/min high-performance fuel injectors
- Engineered for 2004-2017 Honda J-Series applications
- Current 1200cc replacement for the previous is119-1100h injector set
- Saturated, high-impedance ball-and-seat injector design
- Substantial fuel capacity for high-performance J-Series builds
- Fuel Injector Clinic Data Match Technology provides precise injector-set matching
- Each injector is individually serial numbered
- Data Match Sheet provides detailed flow-matching and latency information
- Superior short pulse width control supports precise fueling at idle and part throttle
- State-of-the-art matching helps provide consistent fuel delivery across all six cylinders
- Precise injector control helps simplify accurate tuning and maintain strong drivability
- Flow tested at 43.5 PSI and 90 degrees F using CF-16B calibration fluid
- Includes the O-rings required for the intended application
- Includes PGTJETR6Q solder-in pigtails for injector connector conversion
- Optional PADPJtoH6 plug-and-play adaptors allow connection without cutting or soldering the factory harness
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Backed by Fuel Injector Clinic's lifetime warranty against failures caused by original manufacturing defects
Fitment
- 2004 Honda J-Series applications
- 2005 Honda J-Series applications
- 2006 Honda J-Series applications
- 2007 Honda J-Series applications
- 2008 Honda J-Series applications
- 2009 Honda J-Series applications
- 2010 Honda J-Series applications
- 2011 Honda J-Series applications
- 2012 Honda J-Series applications
- 2013 Honda J-Series applications
- 2014 Honda J-Series applications
- 2015 Honda J-Series applications
- 2016 Honda J-Series applications
- 2017 Honda J-Series applications
Fitment applies to compatible 2004-2017 Honda J-Series engine applications. If your combination uses an engine swap, aftermarket fuel rail, modified intake, or another unusual fuel system configuration, contact Beefcake Racing before ordering to verify proper injector fitment and electrical connection.
FAQs
Is the Fuel Injector Clinic is119-1200h the replacement for the previous is119-1100h injector set?
Yes. Fuel Injector Clinic identifies is119-1200h as the current 1200cc injector set that was previously offered as is119-1100h. The current is119-1200h part number and 1200cc flow rating should be used when identifying or ordering this injector set.
Do the Fuel Injector Clinic is119-1200h injectors require wiring changes?
The set includes PGTJETR6Q solder-in pigtails that can be used for the required injector connector conversion. For compatible applications, optional PADPJtoH6 plug-and-play adaptors connect the injectors to the stock harness without requiring the factory wiring to be cut or soldered.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
A high-performance Honda J-Series fuel system needs more than simply choosing a larger injector. Injector capacity, fuel system hardware, electrical connections, fuel pressure, tuning requirements, and performance goals all need to work together. Beefcake Racing can help you determine whether the Fuel Injector Clinic is119-1200h is the right injector set for your 2004-2017 J-Series build. For fitment, connector, fuel system, or ordering assistance, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
