Fuel Injector Clinic 1000cc High-Z Fuel Injector Set (is119-1000h) - 2004-2017 Honda J-Series
Step up the fuel capacity of your 2004-2017 Honda J-Series performance build with the Fuel Injector Clinic 1000cc High-Z Fuel Injector Set. Part number is119-1000h includes six 1000cc/min saturated, high-impedance ball-and-seat injectors engineered for J-Series applications. Combining substantial fuel delivery with excellent short pulse width control, this set gives modified Honda V6 combinations the injector capacity needed for serious performance while retaining the precise fueling, responsive part-throttle operation, and drivability expected from a properly calibrated street or track build.
Each is119-1000h injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Every injector is individually serial numbered, and its results are documented on the supplied Data Match Sheet with detailed flow-matching and latency information to provide tuners with valuable calibration data. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) using CF-16B calibration fluid maintained at 90 degrees F. Superior short pulse width control and state-of-the-art matching provide consistent injector performance throughout the operating range, helping make these 1000cc injectors easier to tune without sacrificing drivability.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is119-1000h
- Application: 2004-2017 Honda J-Series
- Injector Quantity: 6
- Flow Rating: 1000cc/min
- Injector Type: Ball-and-seat
- Impedance: High impedance / High-Z
- Operation: Saturated
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Testing Pressure: 43.5 PSI (3 Bar)
- Testing Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTUSC6
- Optional Plug-and-Play Adaptors: PADPUtoH6
- O-Rings: Included for the intended application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 1000cc/min high-performance fuel injectors
- Engineered for 2004-2017 Honda J-Series applications
- Saturated, high-impedance ball-and-seat injector design
- Substantial fuel capacity for serious performance applications
- Fuel Injector Clinic Data Match Technology provides precise injector-set matching
- Each injector is individually serial numbered
- Data Match Sheet provides detailed flow-matching and latency information
- Superior short pulse width control supports precise fueling at idle and part throttle
- State-of-the-art matching helps provide consistent fuel delivery across all six cylinders
- Accurate injector control helps simplify tuning and maintain strong drivability
- Flow tested at 43.5 PSI and 90 degrees F using CF-16B calibration fluid
- Includes the O-rings required for the intended application
- Includes PGTUSC6 solder-in pigtails for injector connector conversion
- Optional PADPUtoH6 plug-and-play adaptors allow connection to the stock harness without cutting or soldering
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Backed by Fuel Injector Clinic's lifetime warranty against failures caused by original manufacturing defects
Fitment
- 2004 Honda J-Series applications
- 2005 Honda J-Series applications
- 2006 Honda J-Series applications
- 2007 Honda J-Series applications
- 2008 Honda J-Series applications
- 2009 Honda J-Series applications
- 2010 Honda J-Series applications
- 2011 Honda J-Series applications
- 2012 Honda J-Series applications
- 2013 Honda J-Series applications
- 2014 Honda J-Series applications
- 2015 Honda J-Series applications
- 2016 Honda J-Series applications
- 2017 Honda J-Series applications
Fitment applies to compatible 2004-2017 Honda J-Series engine applications. If your combination uses an engine swap, aftermarket fuel rail, modified intake, or another unusual fuel system configuration, contact Beefcake Racing before ordering to verify proper injector fitment and electrical connection.
FAQs
What does Data Match Technology provide with the Fuel Injector Clinic is119-1000h set?
Fuel Injector Clinic uses Data Match Technology to precisely match all six injectors as a set. Every injector is individually serial numbered, with detailed matching and latency results supplied on the Data Match Sheet. This gives your tuner useful injector-specific data while helping provide consistent fuel delivery across all six cylinders.
Do the is119-1000h injectors require changes to the factory injector wiring?
The set includes PGTUSC6 solder-in pigtails that can be used to replace the existing injector connectors. For compatible applications, optional PADPUtoH6 plug-and-play adaptors connect the injectors to the stock harness without requiring the factory wiring to be cut or soldered.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
A high-performance Honda J-Series fuel system needs more than simply choosing a larger injector. Injector capacity, fuel system hardware, electrical connections, fuel pressure, tuning requirements, and your performance goals all need to work together. Beefcake Racing can help you determine whether the Fuel Injector Clinic is119-1000h is the right injector set for your 2004-2017 J-Series build. For fitment, connector, fuel system, or ordering assistance, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
