Fuel Injector Clinic 445cc High-Z Fuel Injector Set (is118-0445h) - 1998-2003 Honda J-Series
Upgrade your 1998-2003 Honda J-Series fuel system with the precision, consistency, and increased fuel capacity of the Fuel Injector Clinic 445cc High-Z Fuel Injector Set. Part number is118-0445h includes six 445cc/min saturated, high-impedance ball-and-seat injectors designed for J-Series performance applications. Modern injector technology provides excellent linearity and short pulse width repeatability, making this set a strong choice for modified Honda V6 combinations that need additional fuel delivery while retaining smooth idle quality, responsive part-throttle operation, and excellent overall drivability.
Fuel Injector Clinic precisely flow matches each is118-0445h injector set to within 1 percent. Every injector is individually numbered, and the results for each injector are documented on the detailed flow sheet supplied with the set. FIC flow tests and rates these high-performance injectors at 43.5 PSI (3 Bar) using CF-16B calibration fluid maintained at 90 degrees F. Superior short pulse width control and tight manufacturing tolerances provide consistent injector-to-injector performance, giving your tuner a predictable foundation for accurate calibration throughout the operating range.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is118-0445h
- Application: 1998-2003 Honda J-Series
- Injector Quantity: 6
- Flow Rating: 445cc/min
- Injector Type: Ball-and-seat
- Impedance: High impedance / High-Z
- Operation: Saturated
- Flow Matching: Precisely flow matched to within 1 percent
- Testing Pressure: 43.5 PSI (3 Bar)
- Testing Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTUSC6
- Optional Plug-and-Play Adaptors: PADPUtoH6
- O-Rings: Included for the intended application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 445cc/min high-performance fuel injectors
- Designed for 1998-2003 Honda J-Series applications
- Saturated, high-impedance ball-and-seat injector design
- Modern injector technology provides excellent linearity
- Excellent short pulse width repeatability supports consistent fuel delivery
- Precisely flow matched to within 1 percent
- Each injector is individually numbered
- Detailed flow sheet documents the results for every injector in the matched set
- Superior short pulse width control supports precise fueling at idle and part throttle
- Tight manufacturing tolerances help provide predictable injector-to-injector performance
- Consistent fuel control helps simplify accurate tuning and maintain strong drivability
- Flow tested at 43.5 PSI and 90 degrees F using CF-16B calibration fluid
- Includes the O-rings required for the intended application
- Includes PGTUSC6 solder-in pigtails for injector connector conversion
- Optional PADPUtoH6 plug-and-play adaptors allow connection without cutting or soldering the factory harness
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Backed by Fuel Injector Clinic's lifetime warranty against failures caused by original manufacturing defects
Fitment
- 1998 Honda J-Series applications
- 1999 Honda J-Series applications
- 2000 Honda J-Series applications
- 2001 Honda J-Series applications
- 2002 Honda J-Series applications
- 2003 Honda J-Series applications
Fitment applies to compatible 1998-2003 Honda J-Series engine applications. If your combination uses an engine swap, aftermarket fuel rail, modified intake, or another unusual fuel system configuration, contact Beefcake Racing before ordering to verify proper injector fitment and electrical connection.
FAQs
How are the Fuel Injector Clinic is118-0445h injectors matched?
Fuel Injector Clinic precisely flow matches all six injectors in each is118-0445h set to within 1 percent. Every injector is individually numbered, and its individual results are documented on the detailed flow sheet supplied with the set. This helps provide consistent fuel delivery across all six cylinders while giving your tuner useful injector data for accurate calibration.
Do the is118-0445h injectors require changes to the factory injector wiring?
The set includes PGTUSC6 solder-in pigtails that can be used to replace the existing injector connectors. For compatible applications, optional PADPUtoH6 plug-and-play adaptors provide the required connection without cutting or soldering the factory harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Choosing the right injectors for a Honda J-Series performance build means matching injector capacity with the engine combination, fuel system hardware, electrical connections, fuel pressure, tuning requirements, and performance goals. Beefcake Racing can help you determine whether the Fuel Injector Clinic is118-0445h is the right injector set for your 1998-2003 J-Series build. For fitment, connector, fuel system, or ordering assistance, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
