Fuel Injector Clinic 1000cc High-Z Fuel Injector Set (is117-1000h) - 2000-2005 Honda S2000
Give your 2000-2005 Honda S2000 AP1 the fuel delivery needed for a serious performance build with the Fuel Injector Clinic 1000cc High-Z Fuel Injector Set. Part number is117-1000h includes four 1000cc/min saturated, high-impedance ball-and-seat injectors engineered for excellent linearity, precise fuel delivery, and strong short pulse width control. Whether you are upgrading an S2000 that has outgrown its current fuel system or building around increased power demands, this matched injector set provides substantial additional fuel capacity without giving up the control and drivability that matter on a street-driven performance car.
Fuel Injector Clinic precisely matches this set using its proprietary Data Match Technology. Each injector is individually serial numbered, with injector-specific results supplied on the included Data Match Sheet for detailed flow matching and latency information. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) using CF-16B calibration fluid maintained at 90 degrees F. The combination of state-of-the-art matching and superior short pulse width control gives tuners accurate, consistent injector performance while helping maintain excellent drivability.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is117-1000h
- Application: 2000-2005 Honda S2000 AP1
- Injector Quantity: 4
- Flow Rating: 1000cc/min
- Injector Type: Ball-and-seat
- Impedance: High impedance / High-Z
- Operation: Saturated
- Matching: Fuel Injector Clinic Data Match Technology
- Testing Pressure: 43.5 PSI (3 Bar)
- Testing Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTUSC4
- Optional Plug-and-Play Adapters: PADPUtoH4
- O-Rings: Included for the intended factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 1000cc/min performance fuel injectors for the 2000-2005 Honda S2000 AP1
- Saturated, high-impedance ball-and-seat injector design
- High-flow 1000cc/min capacity for performance fuel-system upgrades
- Excellent injector linearity for predictable fuel delivery
- Superior short pulse width control helps support smooth drivability
- Precisely matched using Fuel Injector Clinic's proprietary Data Match Technology
- Each injector is individually serial numbered for identification and documentation
- Included Data Match Sheet provides detailed flow matching and latency information
- Flow tested and rated at 43.5 PSI (3 Bar)
- Tested with CF-16B calibration fluid maintained at 90 degrees F
- State-of-the-art matching helps deliver consistent fueling across all four cylinders
- Includes PGTUSC4 solder-in pigtails
- Optional PADPUtoH4 plug-and-play adapters allow installation without cutting or soldering the factory harness
- Includes the O-rings required for the intended factory application
- Fuel Injector Clinic uses brand-new injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against failures caused by original manufacturing defects
Fitment
- 2000 Honda S2000 AP1
- 2001 Honda S2000 AP1
- 2002 Honda S2000 AP1
- 2003 Honda S2000 AP1
- 2004 Honda S2000 AP1
- 2005 Honda S2000 AP1
The is117-1000h injector set requires an injector connector change when used with the factory wiring harness. PGTUSC4 solder-in pigtails are included and can replace the existing harness connectors. For an installation without cutting or soldering the factory wiring, optional PADPUtoH4 plug-and-play adapters convert the injector connection to the factory harness. FIC also supplies the O-rings required for the intended factory application. If your S2000 uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper fitment.
FAQs
What does Fuel Injector Clinic Data Match Technology do?
Data Match Technology is Fuel Injector Clinic's injector matching process used to precisely match the injectors within the set. Each injector is individually serial numbered, and detailed flow matching and latency results are supplied on the included Data Match Sheet. This provides valuable calibration information while helping deliver consistent fuel delivery across all four cylinders.
Do the is117-1000h injectors plug directly into the factory S2000 wiring harness?
No. The set includes PGTUSC4 pigtails that can be soldered into the wiring harness to replace the existing injector connectors. Optional PADPUtoH4 plug-and-play adapters are available for owners who want the required connector conversion without cutting or soldering the factory harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Choosing the right injectors is about more than simply selecting a flow rating. Your injector capacity, fuel system, wiring connections, supporting modifications, and calibration all need to work together. Beefcake Racing can help you determine whether the Fuel Injector Clinic is117-1000h is the right choice for your S2000 build and make sure you order the correct connection option for your application. For fitment, fuel-system, or ordering assistance, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
