Fuel Injector Clinic 775cc High-Z Fuel Injector Set (is117-0775h) - 2000-2005 Honda S2000
Step up the fuel system in your 2000-2005 Honda S2000 AP1 with the Fuel Injector Clinic 775cc High-Z Fuel Injector Set. Part number is117-0775h includes four 775cc/min saturated, high-impedance ball-and-seat injectors engineered for excellent linearity, short pulse width repeatability, and consistent fuel delivery. With significantly increased injector capacity for performance-oriented S2000 builds, this set delivers the precise control tuners need while maintaining the drivability that matters on a street-driven car.
Fuel Injector Clinic precisely matches this injector set using its proprietary Data Match Technology. Each injector is individually serial numbered, and the results are documented on the included Data Match Sheet, providing detailed flow matching and latency information for calibration. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) using CF-16B calibration fluid maintained at 90 degrees F. Superior short pulse width control and state-of-the-art matching help make these injectors easier to tune while supporting smooth, predictable drivability.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is117-0775h
- Application: 2000-2005 Honda S2000 AP1
- Injector Quantity: 4
- Flow Rating: 775cc/min
- Injector Type: Ball-and-seat
- Impedance: High impedance / High-Z
- Operation: Saturated
- Matching: Fuel Injector Clinic Data Match Technology
- Testing Pressure: 43.5 PSI (3 Bar)
- Testing Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTUSC4
- Optional Plug-and-Play Adapters: PADPUtoH4
- O-Rings: Included for the intended factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 775cc/min performance fuel injectors for the 2000-2005 Honda S2000 AP1
- Saturated, high-impedance ball-and-seat injector design
- Excellent linearity for consistent and predictable fuel delivery
- Strong short pulse width repeatability for precise injector operation
- Superior short pulse width control helps maintain excellent drivability
- Precisely matched using Fuel Injector Clinic's proprietary Data Match Technology
- Each injector is individually serial numbered
- Included Data Match Sheet provides detailed flow matching and latency information
- Flow tested and rated at 43.5 PSI (3 Bar)
- Tested using CF-16B calibration fluid maintained at 90 degrees F
- State-of-the-art matching helps deliver consistent fueling across all four cylinders
- Includes PGTUSC4 solder-in pigtails
- Optional PADPUtoH4 plug-and-play adapters eliminate the need to cut or solder the factory harness
- Includes the O-rings required for the intended factory application
- Fuel Injector Clinic uses brand-new injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against failures caused by original manufacturing defects
Fitment
- 2000 Honda S2000 AP1
- 2001 Honda S2000 AP1
- 2002 Honda S2000 AP1
- 2003 Honda S2000 AP1
- 2004 Honda S2000 AP1
- 2005 Honda S2000 AP1
The is117-0775h injector set requires an injector connector change when used with the factory wiring harness. PGTUSC4 solder-in pigtails are included and can be used to replace the existing injector connectors. For an installation without cutting or soldering the factory wiring, optional PADPUtoH4 plug-and-play adapters provide the required connector conversion. Fuel Injector Clinic also supplies the O-rings required for the intended factory application. If your S2000 uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper fitment.
FAQs
What is Fuel Injector Clinic Data Match Technology?
Fuel Injector Clinic uses Data Match Technology to precisely match the injectors within the set. Each injector is individually serial numbered, and its flow matching and latency results are supplied on the included Data Match Sheet. This provides valuable calibration data while helping deliver consistent fuel delivery across all four cylinders.
Do the is117-0775h injectors require changes to the factory S2000 wiring harness?
Yes. The injector connectors must be changed. The set includes PGTUSC4 solder-in pigtails that can replace the existing connectors, or optional PADPUtoH4 plug-and-play adapters can be used to make the required connection without cutting or soldering the factory harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
The right injector upgrade needs to match your S2000's fuel requirements, supporting fuel-system components, electrical connections, and calibration. Beefcake Racing can help you determine whether the Fuel Injector Clinic is117-0775h is the right choice for your build and make sure you order the proper connection option for your application. For fitment, fuel-system, or ordering assistance, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
