Fuel Injector Clinic 650cc High-Z Fuel Injector Set (is117-0650h) - 2000-2005 Honda S2000
Upgrade the fuel system in your 2000-2005 Honda S2000 with the Fuel Injector Clinic 650cc High-Z Fuel Injector Set. Part number is117-0650h includes four 650cc/min saturated, high-impedance ball-and-seat injectors designed to deliver excellent linearity, short pulse width repeatability, and consistent fuel delivery. For an AP1 S2000 that needs increased injector capacity, this matched set combines the additional fuel flow required for performance applications with the precise injector control needed for responsive street manners and dependable tuning.
Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the injectors in each set. Every injector is individually serial numbered, and its results are documented on the included Data Match Sheet, providing detailed flow matching and latency information for calibration. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) with CF-16B calibration fluid maintained at 90 degrees F. Superior short pulse width control and state-of-the-art matching help make these injectors easier to tune while supporting excellent drivability.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is117-0650h
- Application: 2000-2005 Honda S2000 AP1
- Injector Quantity: 4
- Flow Rating: 650cc/min
- Injector Type: Ball-and-seat
- Impedance: High impedance / High-Z
- Operation: Saturated
- Matching: Fuel Injector Clinic Data Match Technology
- Testing Pressure: 43.5 PSI (3 Bar)
- Testing Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTUSC4
- Optional Plug-and-Play Adapters: PADPUtoH4
- O-Rings: Included for the intended factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 650cc/min performance fuel injectors for the 2000-2005 Honda S2000 AP1
- Saturated, high-impedance ball-and-seat injector design
- Excellent linearity for predictable fuel delivery
- Strong short pulse width repeatability for consistent injector response
- Superior short pulse width control helps maintain excellent drivability
- Precisely matched using Fuel Injector Clinic's proprietary Data Match Technology
- Each injector is individually serial numbered
- Detailed Data Match Sheet provides injector flow matching and latency information
- Flow tested and rated at 43.5 PSI (3 Bar)
- Testing performed with CF-16B calibration fluid maintained at 90 degrees F
- State-of-the-art matching provides consistent injector performance across all four cylinders
- Includes PGTUSC4 solder-in pigtails
- Optional PADPUtoH4 plug-and-play adapters eliminate the need to cut or solder the factory harness
- Includes the O-rings required for the intended factory application
- Fuel Injector Clinic uses brand-new injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against failures caused by original manufacturing defects
Fitment
- 2000 Honda S2000 AP1
- 2001 Honda S2000 AP1
- 2002 Honda S2000 AP1
- 2003 Honda S2000 AP1
- 2004 Honda S2000 AP1
- 2005 Honda S2000 AP1
This injector set requires a change to the injector connector when used with the factory wiring harness. PGTUSC4 solder-in pigtails are included with the set, or optional PADPUtoH4 plug-and-play adapters can connect the injectors to the stock harness without cutting or soldering. Fuel Injector Clinic supplies the O-rings required for the intended factory application. If your S2000 uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to confirm proper injector fitment.
FAQs
What is Fuel Injector Clinic Data Match Technology?
Fuel Injector Clinic uses Data Match Technology to precisely match the injectors within the set. Each injector is individually serial numbered, and its results are supplied on a Data Match Sheet containing detailed flow matching and latency information. This gives the tuner accurate injector-specific data and helps provide consistent fueling across all four cylinders.
Do the is117-0650h injectors require wiring changes on a 2000-2005 Honda S2000?
Yes. The set includes PGTUSC4 pigtails that can be soldered into the vehicle wiring harness. For owners who prefer not to cut or solder the factory harness, optional PADPUtoH4 plug-and-play adapters provide the required connector conversion.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
A properly planned S2000 fuel system requires the injector capacity, electrical connections, supporting fuel-system components, and calibration to work together. Beefcake Racing can help you determine whether the Fuel Injector Clinic is117-0650h is the right injector set for your combination and make sure you order the correct connection option for your S2000. For fitment, fuel-system, or ordering assistance, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
