Fuel Injector Clinic 525cc High-Z Fuel Injector Set (is117-0525h) - 2000-2005 Honda S2000
Upgrade the fuel delivery in your 2000-2005 Honda S2000 AP1 with the Fuel Injector Clinic 525cc High-Z Fuel Injector Set. Part number is117-0525h includes four 525cc/min saturated, high-impedance ball-and-seat injectors engineered for excellent linearity, consistent short pulse width repeatability, and dependable performance. For an S2000 that needs more fuel capacity than the factory system can provide, these injectors deliver the precise control tuners want while helping maintain the drivability expected from a street-driven performance build.
Fuel Injector Clinic precisely flow matches each injector set to within 1 percent. Every injector is individually numbered, and its test results are documented on the detailed flow sheet supplied with the set. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) using CF-16B calibration fluid maintained at 90 degrees F. Tight manufacturing tolerances and superior short pulse width control help provide predictable fuel delivery, straightforward calibration, and excellent drivability.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is117-0525h
- Application: 2000-2005 Honda S2000 AP1
- Injector Quantity: 4
- Flow Rating: 525cc/min
- Injector Type: Ball-and-seat
- Impedance: High impedance / High-Z
- Operation: Saturated
- Flow Matching: Precisely matched to within 1 percent
- Testing Pressure: 43.5 PSI (3 Bar)
- Testing Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTUSC4
- Optional Plug-and-Play Adapters: PADPUtoH4
- O-Rings: Included for the intended factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 525cc/min performance fuel injectors for the 2000-2005 Honda S2000 AP1
- Saturated, high-impedance ball-and-seat injector design
- Excellent linearity for predictable and consistent fuel delivery
- Strong short pulse width repeatability for precise injector operation
- Superior short pulse width control helps support excellent drivability
- Precisely flow matched to within 1 percent
- Each injector is individually numbered
- Detailed injector results are supplied on the included flow sheet
- Flow tested and rated at 43.5 PSI (3 Bar)
- Tested using CF-16B calibration fluid maintained at 90 degrees F
- Tight manufacturing tolerances help simplify accurate calibration
- Includes PGTUSC4 solder-in pigtails
- Optional PADPUtoH4 plug-and-play adapters eliminate the need to cut or solder the factory harness
- Includes the O-rings required for the intended factory application
- Fuel Injector Clinic uses brand-new injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against failures caused by original manufacturing defects
Fitment
- 2000 Honda S2000 AP1
- 2001 Honda S2000 AP1
- 2002 Honda S2000 AP1
- 2003 Honda S2000 AP1
- 2004 Honda S2000 AP1
- 2005 Honda S2000 AP1
The is117-0525h injector set requires a connector change when installed with the factory wiring harness. PGTUSC4 solder-in pigtails are included and can be used to replace the existing injector connectors. Optional PADPUtoH4 plug-and-play adapters provide the necessary connection without cutting or soldering the factory harness. Fuel Injector Clinic also supplies the O-rings required for the intended factory application. If your S2000 uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to confirm proper injector fitment.
FAQs
How are the Fuel Injector Clinic is117-0525h injectors matched?
Fuel Injector Clinic precisely flow matches the four injectors in each set to within 1 percent. Each injector is individually numbered, and its results are documented on the detailed flow sheet included with the set. This helps provide consistent fuel delivery across all four cylinders and gives the tuner reliable injector data for calibration.
Do the is117-0525h injectors plug directly into the factory S2000 wiring harness?
No. PGTUSC4 solder-in pigtails are included with the injector set for replacing the factory injector connectors. Optional PADPUtoH4 plug-and-play adapters are available if you want to make the required connection without cutting or soldering the factory harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Getting the right injectors for your S2000 means matching injector capacity, electrical connections, supporting fuel-system components, and calibration to the goals of your build. Beefcake Racing can help you determine whether the Fuel Injector Clinic is117-0525h is the right choice and make sure you order the proper connection option for your application. For fitment, fuel-system, or ordering assistance, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
