Fuel Injector Clinic 445cc High-Z Fuel Injector Set (is117-0445h) - 2000-2005 Honda S2000
Upgrade the fuel system in your 2000-2005 Honda S2000 AP1 with the Fuel Injector Clinic 445cc High-Z Fuel Injector Set. Part number is117-0445h includes four 445cc/min saturated, high-impedance ball-and-seat injectors engineered for excellent linearity, consistent short pulse width repeatability, and precise fuel delivery. For S2000 owners looking for increased injector capacity while retaining strong low-load control and street drivability, this matched set delivers the accuracy and consistency needed for a properly calibrated performance combination.
Fuel Injector Clinic precisely flow matches each injector set to within 1 percent. Every injector is individually numbered, and its results are documented on the detailed flow sheet supplied with the set. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) using CF-16B calibration fluid maintained at 90 degrees F. Superior short pulse width control and tight manufacturing tolerances help make these injectors straightforward to tune while supporting smooth, predictable drivability.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is117-0445h
- Application: 2000-2005 Honda S2000 AP1
- Injector Quantity: 4
- Flow Rating: 445cc/min
- Injector Type: Ball-and-seat
- Impedance: High impedance / High-Z
- Operation: Saturated
- Flow Matching: Precisely matched to within 1 percent
- Testing Pressure: 43.5 PSI (3 Bar)
- Testing Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTUSC4
- Optional Plug-and-Play Adapters: PADPUtoH4
- O-Rings: Included for the intended factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 445cc/min performance fuel injectors for the 2000-2005 Honda S2000 AP1
- Saturated, high-impedance ball-and-seat injector design
- Excellent linearity for consistent and predictable fuel delivery
- Strong short pulse width repeatability for precise injector operation
- Superior short pulse width control helps maintain excellent drivability
- Precisely flow matched to within 1 percent
- Each injector is individually numbered
- Detailed injector results supplied on the included flow sheet
- Flow tested and rated at 43.5 PSI (3 Bar)
- Tested using CF-16B calibration fluid maintained at 90 degrees F
- Tight manufacturing tolerances help provide consistent performance and easier calibration
- Includes PGTUSC4 solder-in pigtails
- Optional PADPUtoH4 plug-and-play adapters eliminate the need to cut or solder the factory harness
- Includes the O-rings required for the intended factory application
- Fuel Injector Clinic uses brand-new injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against failures caused by original manufacturing defects
Fitment
- 2000 Honda S2000 AP1
- 2001 Honda S2000 AP1
- 2002 Honda S2000 AP1
- 2003 Honda S2000 AP1
- 2004 Honda S2000 AP1
- 2005 Honda S2000 AP1
The is117-0445h injector set requires an injector connector change when used with the factory wiring harness. PGTUSC4 solder-in pigtails are included and can be used to replace the existing injector connectors. Optional PADPUtoH4 plug-and-play adapters provide the required connector conversion without cutting or soldering the factory harness. Fuel Injector Clinic also supplies the O-rings required for the intended factory application. If your S2000 uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
How are the Fuel Injector Clinic is117-0445h injectors matched?
Fuel Injector Clinic precisely flow matches the four injectors in each set to within 1 percent. Each injector is individually numbered, with its results documented on the detailed flow sheet included with the set. Consistent injector-to-injector performance helps provide balanced fuel delivery across all four cylinders and gives the tuner dependable data for calibration.
Do the is117-0445h injectors plug directly into the factory S2000 wiring harness?
No. The set includes PGTUSC4 solder-in pigtails that can be used to replace the factory injector connectors. Optional PADPUtoH4 plug-and-play adapters are available for owners who want to make the required connector conversion without cutting or soldering the factory wiring harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Choosing the right injector upgrade means matching injector capacity, electrical connections, supporting fuel-system components, and calibration to your S2000 build. Beefcake Racing can help you determine whether the Fuel Injector Clinic is117-0445h is the right choice and make sure you order the proper connection option for your application. For fitment, fuel-system, or ordering assistance, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
