Fuel Injector Clinic 365cc High-Z Fuel Injector Set (is117-0365h) - 2000-2005 Honda S2000
Upgrade the fuel delivery in your 2000-2005 Honda S2000 with the Fuel Injector Clinic 365cc High-Z Fuel Injector Set. Part number is117-0365h includes four 365cc/min saturated, high-impedance ball-and-seat injectors engineered for excellent linearity and short pulse width repeatability. Precise injector control and consistent fuel delivery make this matched set an excellent choice for S2000 owners looking for dependable performance while retaining the drivability and response that matter on a street-driven car.
Fuel Injector Clinic precisely flow matches each high-performance injector set to within 1 percent. Every injector is individually numbered, with the results for each injector documented on the detailed flow sheet supplied with the set. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) with CF-16B calibration fluid maintained at 90 degrees F. Tight manufacturing tolerances and superior short pulse width control help provide predictable injector behavior, making calibration easier while supporting smooth, consistent drivability.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is117-0365h
- Application: 2000-2005 Honda S2000
- Injector Quantity: 4
- Flow Rating: 365cc/min
- Injector Type: Ball-and-seat
- Impedance: High impedance / High-Z
- Operation: Saturated
- Flow Matching: Precisely flow matched to within 1 percent
- Testing Pressure: 43.5 PSI (3 Bar)
- Testing Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTUSC4
- Optional Plug-and-Play Adapters: PADPUtoH4
- O-Rings: Included for the intended factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 365cc/min performance fuel injectors for the 2000-2005 Honda S2000
- Saturated, high-impedance ball-and-seat injector design
- Excellent linearity for predictable fuel delivery
- Strong short pulse width repeatability for consistent injector response
- Superior short pulse width control helps support excellent drivability
- Precisely flow matched to within 1 percent
- Each injector is individually numbered
- Detailed flow results supplied with each matched injector set
- Flow tested and rated at 43.5 PSI (3 Bar)
- Testing performed with CF-16B calibration fluid at 90 degrees F
- Tight manufacturing tolerances help provide consistent fueling across all four cylinders
- Includes PGTUSC4 solder-in pigtails
- Optional PADPUtoH4 plug-and-play adapters eliminate the need to cut or solder the factory harness
- Includes the O-rings required for the intended factory application
- Fuel Injector Clinic uses brand-new injectors rather than remanufactured or core-program injectors
- Lifetime warranty against injector failure caused by defects in original manufacture
Fitment
- 2000 Honda S2000
- 2001 Honda S2000
- 2002 Honda S2000
- 2003 Honda S2000
- 2004 Honda S2000
- 2005 Honda S2000
This injector set requires an injector connector change when installed with the factory wiring harness. PGTUSC4 solder-in pigtails are included, or optional PADPUtoH4 plug-and-play adapters can be used to connect the injectors without cutting or soldering the vehicle harness. Fuel Injector Clinic supplies the O-rings required for the intended factory application. If your S2000 uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
How are the Fuel Injector Clinic is117-0365h injectors matched and tested?
Fuel Injector Clinic precisely flow matches the four injectors in each set to within 1 percent. Each injector is individually numbered, with its results documented on the detailed flow sheet supplied with the set. The injectors are flow tested and rated at 43.5 PSI (3 Bar) using CF-16B calibration fluid maintained at 90 degrees F.
Do the is117-0365h injectors require wiring changes on a 2000-2005 Honda S2000?
The set includes PGTUSC4 pigtails that can be soldered into the vehicle harness. For an installation without cutting or soldering, optional PADPUtoH4 plug-and-play adapters can be used to connect the injectors to the factory harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Choosing the right injectors means matching flow capacity, electrical connections, fuel-system hardware, and calibration to your S2000 build. Beefcake Racing can help you determine whether the Fuel Injector Clinic is117-0365h is the right injector set for your combination and make sure you order the correct connection option. For fitment, fuel-system, or ordering assistance, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
