Fuel Injector Clinic 1650cc High-Z Fuel Injector Set (is116-1650h) - 2006-2009 Honda/Acura K / S2000
Give your high-horsepower Honda or Acura build the fuel capacity it needs without sacrificing the precise injector control required for street drivability. The Fuel Injector Clinic 1650cc High-Z Fuel Injector Set, part number is116-1650h, includes four 1650cc/min saturated, high-impedance ball-and-seat injectors for compatible Honda/Acura K applications and 2006-2009 Honda S2000 AP2 applications. These high-flow injectors combine serious fuel delivery with excellent idle performance, making them a strong choice for properly tuned high-output gasoline, E85, and race-fuel combinations.
The is116-1650h uses stainless alloy valve construction for broad fuel compatibility, including pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Each injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Every injector is individually serial numbered, and its results are supplied on the Data Match Sheet with detailed flow-matching and latency information. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) using CF-16B calibration fluid maintained at 90 degrees F. Superior short pulse width control and state-of-the-art matching provide the consistency tuners need for accurate fueling, responsive part-throttle operation, and excellent overall drivability.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is116-1650h
- Application: Honda/Acura K applications and 2006-2009 Honda S2000 AP2
- Injector Quantity: 4
- Flow Rating: 1650cc/min
- Injector Type: Ball-and-seat
- Impedance: High impedance / High-Z
- Operation: Saturated
- Valve Construction: Stainless alloy
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Testing Pressure: 43.5 PSI (3 Bar)
- Testing Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTJETR4Q
- Optional Plug-and-Play Adaptors: PADPJtoH4
- O-Rings: Included for the intended application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 1650cc/min high-performance fuel injectors
- Designed for compatible Honda/Acura K and 2006-2009 Honda S2000 AP2 applications
- Saturated, high-impedance ball-and-seat injector design
- High fuel capacity for demanding street and race combinations
- Excellent idle performance in properly calibrated street-driven applications
- Well suited for high-output gasoline and E85 performance builds
- Stainless alloy valve construction provides broad fuel compatibility
- Compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Fuel Injector Clinic Data Match Technology provides precise injector-set matching
- Each injector is individually serial numbered
- Data Match Sheet provides detailed flow-matching and latency information
- Superior short pulse width control supports accurate fueling at idle and part throttle
- State-of-the-art matching helps provide consistent fuel delivery across all four cylinders
- Predictable injector behavior supports accurate tuning and excellent drivability
- Flow tested at 43.5 PSI and 90 degrees F using CF-16B calibration fluid
- Includes the O-rings required for the intended application
- Includes PGTJETR4Q pigtails for the required injector connector conversion
- Optional PADPJtoH4 plug-and-play adaptors allow connection without cutting or soldering the factory harness
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Backed by Fuel Injector Clinic's lifetime warranty against failures caused by original manufacturing defects
Fitment
- Honda/Acura K applications
- 2006 Honda S2000 AP2
- 2007 Honda S2000 AP2
- 2008 Honda S2000 AP2
- 2009 Honda S2000 AP2
Fitment for Honda/Acura K applications varies by engine and vehicle combination. If your vehicle uses an engine swap, aftermarket fuel rail, modified intake, or another unusual fuel system configuration, contact Beefcake Racing before ordering to verify proper injector fitment and electrical connection.
FAQs
What fuels are compatible with Fuel Injector Clinic is116-1650h injectors?
The is116-1650h uses stainless alloy valve construction and is compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. This broad fuel compatibility makes the 1650cc injector a versatile choice for high-output Honda and Acura street and race combinations.
Do the is116-1650h injectors require changes to the injector wiring?
Yes. The set includes PGTJETR4Q pigtails that can be soldered into the harness to replace the existing injector connectors. For compatible applications, optional PADPJtoH4 plug-and-play adaptors provide the required connection without cutting or soldering the factory harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
A high-output Honda or Acura fuel system requires injector size, fuel type, fuel pressure, supporting hardware, electrical connections, and calibration to work together. Beefcake Racing can help you determine whether the Fuel Injector Clinic is116-1650h is the right injector set for your performance build. For fitment, fuel system, connector, or ordering assistance, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
