Fuel Injector Clinic 365cc High-Z Fuel Injector Set (is116-0365h) - 2006-2009 Honda/Acura K / S2000
Upgrade your Honda or Acura fuel system with the precision and consistency of the Fuel Injector Clinic 365cc High-Z Fuel Injector Set. Part number is116-0365h includes four 365cc/min saturated, high-impedance ball-and-seat injectors for compatible Honda/Acura K applications and 2006-2009 Honda S2000 AP2 applications. Designed for excellent linearity and short pulse width repeatability, these injectors deliver predictable fuel control that helps tuners achieve accurate calibration, smooth idle quality, crisp response, and excellent street drivability.
Fuel Injector Clinic precisely flow matches each is116-0365h injector set to within 1 percent. Every injector is individually numbered, with the results for each injector documented on the detailed flow sheet supplied with the set. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) using CF-16B calibration fluid maintained at 90 degrees F. Superior short pulse width control and tight manufacturing tolerances provide consistent injector behavior across all four cylinders, giving your tuner dependable data and repeatable fuel delivery throughout the operating range.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is116-0365h
- Application: Honda/Acura K applications and 2006-2009 Honda S2000 AP2
- Injector Quantity: 4
- Flow Rating: 365cc/min
- Injector Type: Ball-and-seat
- Impedance: High impedance / High-Z
- Operation: Saturated
- Flow Matching: Precisely flow matched to within 1 percent
- Testing Pressure: 43.5 PSI (3 Bar)
- Testing Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTUSC4
- Optional Plug-and-Play Adaptors: PADPUtoH4
- O-Rings: Included for the intended application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 365cc/min high-performance fuel injectors
- Designed for compatible Honda/Acura K and 2006-2009 Honda S2000 AP2 applications
- Saturated, high-impedance ball-and-seat injector design
- Excellent linearity for predictable injector operation
- Strong short pulse width repeatability for precise low-load fueling
- Injector sets precisely flow matched to within 1 percent
- Each injector individually numbered for identification
- Detailed flow sheet includes individual injector results
- Superior short pulse width control supports accurate idle and part-throttle fueling
- Tight manufacturing tolerances promote consistent fuel delivery across all four cylinders
- Predictable injector behavior helps simplify accurate tuning and maintain excellent drivability
- Flow tested and rated at 43.5 PSI and 90 degrees F using CF-16B calibration fluid
- Includes the O-rings required for the intended application
- Includes PGTUSC4 solder-in pigtails for injector connector conversion
- Optional PADPUtoH4 plug-and-play adaptors eliminate the need to cut or solder the factory harness
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Backed by Fuel Injector Clinic's lifetime warranty against failures caused by original manufacturing defects
Fitment
- Honda/Acura K applications
- 2006 Honda S2000 AP2
- 2007 Honda S2000 AP2
- 2008 Honda S2000 AP2
- 2009 Honda S2000 AP2
Fitment for Honda/Acura K applications varies by engine and vehicle combination. If your vehicle uses an engine swap, aftermarket fuel rail, modified intake, or another unusual fuel system configuration, contact Beefcake Racing before ordering to verify proper injector fitment and electrical connection.
FAQs
How are Fuel Injector Clinic is116-0365h injectors matched?
Fuel Injector Clinic precisely flow matches each four-injector set to within 1 percent. Every injector is individually numbered, and its results are documented on the detailed flow sheet included with the set. Combined with excellent linearity, short pulse width repeatability, and tight manufacturing tolerances, this helps provide consistent fuel delivery and predictable injector behavior for accurate tuning.
Do the is116-0365h injectors require changes to the factory injector wiring?
Yes. PGTUSC4 pigtails are included and can be soldered into the wiring harness to replace the existing injector connectors. Optional PADPUtoH4 plug-and-play adaptors are available for compatible applications and allow the injectors to connect without cutting or soldering the factory harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
The right fuel injector needs to match your engine combination, fuel system hardware, electrical connections, and tuning requirements. Beefcake Racing can help you determine whether the Fuel Injector Clinic is116-0365h is the right choice for your Honda or Acura build. For fitment, connector, fuel system, or ordering assistance, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
