Fuel Injector Clinic 365cc High-Z Fuel Injector Set (is115-0365h) - Honda B / H / D Series Except D17
Upgrade your Honda B, H, or D Series fuel system with the precise, consistent fuel delivery of the Fuel Injector Clinic 365cc High-Z Fuel Injector Set. Part number is115-0365h includes four 365cc/min saturated, high-impedance ball-and-seat injectors designed for Honda B Series, H Series, and D Series engines except the D17. Built with modern injector technology, these injectors provide excellent linearity and short pulse width repeatability, making them a strong upgrade for performance combinations that need additional fuel capacity while retaining smooth idle, crisp part-throttle response, and excellent drivability.
Fuel Injector Clinic precisely flow matches each is115-0365h injector set to within 1 percent. Every injector is individually numbered, and its results are documented on the detailed flow sheet supplied with the set. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) using CF-16B calibration fluid maintained at 90 degrees F. Superior short pulse width control and tight manufacturing tolerances provide consistent injector-to-injector performance, giving your tuner a predictable foundation for accurate calibration throughout the operating range.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is115-0365h
- Application: Honda B Series, H Series, and D Series engines except D17
- Injector Quantity: 4
- Flow Rating: 365cc/min
- Injector Type: Ball-and-seat
- Impedance: High impedance / High-Z
- Operation: Saturated
- Flow Matching: Precisely flow matched to within 1 percent
- Testing Pressure: 43.5 PSI (3 Bar)
- Testing Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTUSC4
- Optional OBD1 Plug-and-Play Adaptors: PADPUtoJ4
- Optional OBD2 Plug-and-Play Adaptors: PADPUtoH4
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 365cc/min high-performance fuel injectors
- Designed for Honda B Series, H Series, and D Series engines except D17
- Saturated, high-impedance ball-and-seat injector design
- Modern injector technology provides excellent linearity
- Strong short pulse width repeatability supports consistent fuel delivery
- Precisely flow matched to within 1 percent
- Each injector is individually numbered
- Detailed flow sheet documents the results for each injector in the matched set
- Superior short pulse width control helps maintain precise fueling at idle and part throttle
- Tight manufacturing tolerances help simplify accurate tuning and support excellent drivability
- Flow tested at 43.5 PSI and 90 degrees F using CF-16B calibration fluid
- Includes the O-rings required for the intended application
- Includes PGTUSC4 solder-in pigtails for injector connector conversion
- Optional PADPUtoJ4 plug-and-play adaptors available for compatible OBD1 harnesses
- Optional PADPUtoH4 plug-and-play adaptors available for compatible OBD2 harnesses
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Backed by Fuel Injector Clinic's lifetime warranty against failures caused by original manufacturing defects
Fitment
- Honda B Series engines
- Honda H Series engines
- Honda D Series engines, except D17
Fitment is based on the engine and fuel system configuration rather than a specific vehicle year and model. This injector set does not fit Honda D17 applications. If your combination uses an aftermarket fuel rail, modified intake, engine swap, or another unusual fuel system configuration, contact Beefcake Racing before ordering to verify proper injector fitment and electrical connection.
FAQs
What Honda engines does the Fuel Injector Clinic is115-0365h injector set fit?
Part number is115-0365h is designed for Honda B Series, H Series, and D Series engine applications, excluding the D17. Because modified Honda builds can use different fuel rails, intake configurations, and other fuel system components, fitment should be verified before ordering if your setup differs from the intended configuration.
Do the is115-0365h injectors require a wiring connector change?
Yes. The set includes PGTUSC4 solder-in pigtails that can be used to replace the existing injector connectors. Optional PADPUtoJ4 plug-and-play adaptors are available for compatible OBD1 harnesses, while PADPUtoH4 adaptors are available for compatible OBD2 harnesses. The plug-and-play adaptor options provide the required connection without cutting or soldering the factory harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Choosing the right injectors for your Honda performance build means matching injector capacity with the engine, fuel system hardware, wiring configuration, tuning requirements, and performance goals. Beefcake Racing can help you determine whether the Fuel Injector Clinic is115-0365h is the right choice for your B Series, H Series, or D Series combination. For fitment, connector, fuel system, or ordering assistance, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
