Fuel Injector Clinic 2150cc High-Z Fuel Injector Set (is111-2150h) - 1990-2005 Honda/Acura NSX
Built for serious high-horsepower NSX fuel systems, the Fuel Injector Clinic 2150cc High-Z Fuel Injector Set gives 1990-2005 Honda/Acura NSX owners massive fuel-flow capability without sacrificing the low-pulse-width control needed for drivability. Part number is111-2150h includes six 2150cc/min saturated, high-impedance ball-and-seat injectors engineered for excellent linearity and repeatable fuel delivery. Their combination of extremely high flow capacity and precise control makes this set an excellent choice for demanding builds, including applications requiring the additional fuel volume associated with E85 and other compatible fuels.
Because controlling an injector this large at idle and part throttle is critical, Fuel Injector Clinic uses its Data Match Technology dynamic flow-matching process for the is111-2150h set. This process improves the ECU's ability to control the injectors in the sub-2ms pulse-width range commonly encountered during idle and part-throttle operation. Each injector is individually serial numbered, and its results are documented on the supplied Data Match Sheet. FIC flow tests and rates the injectors at 43.5 PSI (3 Bar) with CF-16B calibration fluid maintained at 90 degrees F.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is111-2150h
- Application: 1990-2005 Honda/Acura NSX
- Injector Quantity: 6
- Flow Rating: 2150cc/min
- Injector Type: Ball-and-seat
- Impedance: High impedance / High-Z
- Operation: Saturated
- Matching: Data Match Technology dynamic flow matching
- Testing Pressure: 43.5 PSI (3 Bar)
- Testing Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTDEN6
- Optional 3.0L Adapter: PADPDtoJ6 for 1990-2005 3.0L applications
- Optional 3.2L Adapter: PADPDtoH6 for 1997-2005 3.2L applications
- O-Rings: Included for the intended application
- Fuel Restriction: Do not use with Q16, VP Import, or other MTBE oxygenated fuels
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 2150cc/min high-performance injectors for 1990-2005 Honda/Acura NSX applications
- Massive fuel-flow capacity for demanding high-horsepower combinations
- Saturated, high-impedance injector design
- Ball-and-seat injector construction
- Excellent linearity and short pulse width repeatability
- Data Match Technology dynamic flow matching for improved injector control
- Enhanced control in the sub-2ms pulse-width range encountered during idle and part-throttle operation
- Each injector is individually serial numbered
- Detailed Data Match Sheet supplied with injector results
- Flow tested and rated at 43.5 PSI and 90 degrees F using CF-16B calibration fluid
- Suitable for E85 applications when proper fuel-system care procedures are followed
- Includes PGTDEN6 solder-in pigtails
- Optional plug-and-play adapters eliminate the need to cut or solder the factory harness
- PADPDtoJ6 adapter option for 1990-2005 3.0L applications
- PADPDtoH6 adapter option for 1997-2005 3.2L applications
- Includes O-rings required for the intended application
- Uses brand-new injectors rather than remanufactured or core-program injectors
- Backed by Fuel Injector Clinic's lifetime warranty against failures caused by original manufacturing defects
Important Fuel Compatibility Warning
Do not use these 2150cc injectors with Q16, VP Import, or other MTBE oxygenated fuels. The internal construction of the 2150cc/min injector contains a seal that can swell when exposed to MTBE. This can significantly reduce injector flow and makes the injector unsuitable for MTBE oxygenated fuels. Alcohol-based fuels such as E85 can also create potential corrosion concerns during prolonged periods of disuse, so Fuel Injector Clinic's injector care procedures should be followed when running alcohol-based fuel.
Fitment
- 1990 Honda/Acura NSX 3.0L
- 1991 Honda/Acura NSX 3.0L
- 1992 Honda/Acura NSX 3.0L
- 1993 Honda/Acura NSX 3.0L
- 1994 Honda/Acura NSX 3.0L
- 1995 Honda/Acura NSX 3.0L
- 1996 Honda/Acura NSX 3.0L
- 1997 Honda/Acura NSX 3.0L / 3.2L
- 1998 Honda/Acura NSX 3.0L / 3.2L
- 1999 Honda/Acura NSX 3.0L / 3.2L
- 2000 Honda/Acura NSX 3.0L / 3.2L
- 2001 Honda/Acura NSX 3.0L / 3.2L
- 2002 Honda/Acura NSX 3.0L / 3.2L
- 2003 Honda/Acura NSX 3.0L / 3.2L
- 2004 Honda/Acura NSX 3.0L / 3.2L
- 2005 Honda/Acura NSX 3.0L / 3.2L
The included PGTDEN6 pigtails can be soldered into the vehicle wiring harness to accommodate the injector connectors. For a plug-and-play installation without cutting or soldering, PADPDtoJ6 adapters are available for 1990-2005 3.0L applications and PADPDtoH6 adapters are available for 1997-2005 3.2L applications. If your NSX uses an aftermarket fuel rail or another unusual fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
Can Fuel Injector Clinic is111-2150h injectors be used with E85?
Yes. These 2150cc injectors can be used in E85 applications and provide the high fuel volume required by many high-output E85 combinations. Fuel Injector Clinic warns that prolonged disuse while alcohol-based fuel remains in the injectors can create corrosion concerns, so its recommended care procedures should be followed. These injectors must not be used with Q16, VP Import, or other MTBE oxygenated fuels.
How does Data Match Technology help with an injector as large as 2150cc?
Fuel Injector Clinic uses dynamic flow matching to improve the ECU's ability to control these high-flow injectors at very short pulse widths. That is particularly important in the sub-2ms range encountered during idle and part-throttle operation, allowing the is111-2150h to combine very high fuel-flow capability with the precise control needed for a properly calibrated performance NSX.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
A 2150cc injector belongs in a serious fuel system, and getting the entire combination right matters. Beefcake Racing can help you match the Fuel Injector Clinic is111-2150h with the appropriate wiring solution and supporting components for your 1990-2005 NSX. For fitment, fuel-system, or ordering assistance, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
