Fuel Injector Clinic 365cc High-Z Fuel Injector Set (is111-0365h) - 1990-2005 Honda/Acura NSX
Upgrade your 1990-2005 Honda/Acura NSX fuel system with the precision and consistent fuel delivery of the Fuel Injector Clinic 365cc High-Z Fuel Injector Set. Part number is111-0365h includes six 365cc/min saturated, high-impedance ball-and-seat injectors engineered for excellent linearity and short pulse width repeatability. With precise flow matching and predictable injector behavior, this set gives NSX owners and tuners a performance-focused injector upgrade designed to deliver accurate fueling without sacrificing the drivability expected from a street-driven NSX.
Fuel Injector Clinic precisely flow matches each is111-0365h injector set to within 1 percent. Every injector is individually numbered, with its results documented on the detailed flow sheet supplied with the set. FIC flow tests and rates its high-performance injectors at 43.5 PSI (3 Bar) using CF-16B calibration fluid maintained at 90 degrees F. Tight manufacturing tolerances and superior short pulse width control help make these injectors straightforward to tune while supporting smooth idle, responsive part-throttle operation, and consistent fueling throughout the operating range.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is111-0365h
- Application: 1990-2005 Honda/Acura NSX
- Injector Quantity: 6
- Flow Rating: 365cc/min
- Injector Type: Ball-and-seat
- Impedance: High impedance / High-Z
- Operation: Saturated
- Flow Matching: Precisely flow matched to within 1 percent
- Testing Pressure: 43.5 PSI (3 Bar)
- Testing Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTUSC6
- Optional Adapter for 3.0L: PADPUtoJ6 for 1990-2005 3.0L applications
- Optional Adapter for 3.2L: PADPUtoH6 for 1997-2005 3.2L applications
- O-Rings: Included for the intended application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 365cc/min high-performance fuel injectors
- Designed for 1990-2005 Honda/Acura NSX applications
- Saturated, high-impedance ball-and-seat injector construction
- Excellent injector linearity for predictable fuel delivery
- Strong short pulse width repeatability for precise low-load fuel control
- Precisely flow matched to within 1 percent
- Each injector is individually numbered
- Detailed injector flow results supplied with each matched set
- Tight manufacturing tolerances promote consistent fueling across all six cylinders
- Superior short pulse width control supports accurate tuning and excellent drivability
- Flow tested and rated at 43.5 PSI and 90 degrees F using CF-16B calibration fluid
- Includes PGTUSC6 solder-in pigtails
- Optional plug-and-play adapters eliminate the need to cut and solder the factory harness
- PADPUtoJ6 adapter option for 1990-2005 3.0L applications
- PADPUtoH6 adapter option for 1997-2005 3.2L applications
- Includes the O-rings required for the intended application
- Uses brand-new injectors rather than remanufactured or core-program injectors
- Backed by Fuel Injector Clinic's lifetime warranty against failures caused by original manufacturing defects
Fitment
- 1990 Honda/Acura NSX 3.0L
- 1991 Honda/Acura NSX 3.0L
- 1992 Honda/Acura NSX 3.0L
- 1993 Honda/Acura NSX 3.0L
- 1994 Honda/Acura NSX 3.0L
- 1995 Honda/Acura NSX 3.0L
- 1996 Honda/Acura NSX 3.0L
- 1997 Honda/Acura NSX 3.0L / 3.2L
- 1998 Honda/Acura NSX 3.0L / 3.2L
- 1999 Honda/Acura NSX 3.0L / 3.2L
- 2000 Honda/Acura NSX 3.0L / 3.2L
- 2001 Honda/Acura NSX 3.0L / 3.2L
- 2002 Honda/Acura NSX 3.0L / 3.2L
- 2003 Honda/Acura NSX 3.0L / 3.2L
- 2004 Honda/Acura NSX 3.0L / 3.2L
- 2005 Honda/Acura NSX 3.0L / 3.2L
The included PGTUSC6 pigtails can be soldered into the vehicle harness to accommodate the injector connectors. For a plug-and-play connection without cutting or soldering, PADPUtoJ6 adapters are available for 1990-2005 3.0L applications, while PADPUtoH6 adapters are available for 1997-2005 3.2L applications. If your NSX uses an aftermarket fuel rail or another unusual fuel-system configuration, contact Beefcake Racing before ordering to verify proper fitment.
FAQs
Do the Fuel Injector Clinic is111-0365h injectors require wiring changes?
The set includes PGTUSC6 pigtails that can be soldered into the factory wiring harness. If you prefer not to cut or solder the harness, optional plug-and-play adapters are available. Use PADPUtoJ6 for 1990-2005 3.0L applications or PADPUtoH6 for 1997-2005 3.2L applications.
How are the Fuel Injector Clinic is111-0365h injectors matched and tested?
Fuel Injector Clinic precisely flow matches each six-injector set to within 1 percent. Every injector is individually numbered and its results are included on a detailed flow sheet. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with CF-16B calibration fluid maintained at 90 degrees F.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Whether you are refreshing or upgrading the fuel system in your NSX, proper injector sizing, connector selection, fuel-system configuration, and calibration all matter. Beefcake Racing can help you determine whether the Fuel Injector Clinic is111-0365h and the appropriate wiring option are right for your 1990-2005 NSX. For fitment, fuel system, or ordering assistance, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
