Fuel Injector Clinic Six Cylinder 2150cc Custom Injector Set - 53mm Height - 14mm Top O-Ring Diameter - 11mm Bottom O-Ring Diameter (2150-53-14-11-6)
Built for extreme horsepower applications, the Fuel Injector Clinic 2150cc Custom Injector Set delivers the massive fuel capacity required by serious six-cylinder performance builds while maintaining exceptional drivability. Utilizing advanced injector technology, these injectors provide excellent low pulse width control for smoother idle quality and more predictable part-throttle performance than many injectors in this flow range. Each custom injector set is configured to your specified dimensions and includes solder-in pigtails for custom installations.
Every injector is dynamically flow matched using Fuel Injector Clinic's proprietary Data Match Technology to provide outstanding cylinder-to-cylinder consistency. Each injector is individually serial numbered and supplied with a detailed Data Match Sheet containing individual flow and latency values, making ECU calibration easier and more precise. Every injector is flow tested at 43.5 PSI (3 Bar) using CF-16B calibration fluid at 90 degrees F and is backed by Fuel Injector Clinic's Lifetime Warranty against manufacturing defects.
Specifications
- Manufacturer: Fuel Injector Clinic
- Product Code: 2150-53-14-11-6
- Part Number: ISC-2150H-6
- Injector Flow Rate: 2150cc/min
- Injector Height: 53mm
- Top O-Ring Diameter: 14mm
- Bottom O-Ring Diameter: 11mm
- Engine Configuration: 6 Cylinder
- Impedance: High Impedance
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Calibration Fluid: CF-16B at 90 degrees F
- Includes: Six matched injectors, solder-in pigtails, Data Match Sheet, required O-rings
- Warranty: Lifetime Warranty against manufacturing defects
Features
- Custom matched 2150cc injector set for six-cylinder engines
- 53mm injector height with 14mm top and 11mm bottom O-ring configuration
- Includes solder-in pigtails for custom applications
- Fuel Injector Clinic proprietary Data Match Technology
- Each injector individually serial numbered and dynamically flow matched
- Detailed Data Match Sheet with flow and latency values included
- Excellent short pulse width control for smooth idle and part-throttle operation
- Flow tested at 43.5 PSI (3 Bar) using CF-16B calibration fluid
- Includes all required O-rings for the specified injector configuration
- Protected by Fuel Injector Clinic's Lifetime Warranty
Important Fuel Compatibility Information
CAUTION: The internal construction of this 2150cc injector contains a seal that has been found to swell when exposed to MTBE found in oxygenated race fuels such as VP Import and Q16. This swelling can significantly reduce injector flow, making these injectors unsuitable for use with MTBE oxygenated fuels.
When operating with alcohol-based fuels such as E85, Fuel Injector Clinic recommends following proper injector maintenance procedures. Extended storage while exposed to alcohol-based fuels may increase the potential for corrosion if maintenance recommendations are not followed.
Fitment
Custom six-cylinder applications requiring:
- 53mm injector height
- 14mm top O-ring diameter
- 11mm bottom O-ring diameter
FAQs
What makes Data Match Technology different?
Fuel Injector Clinic individually tests and dynamically matches every injector to deliver exceptional cylinder-to-cylinder consistency. Each set includes detailed flow and latency information for more accurate ECU tuning.
Can these injectors be used with E85?
Yes. These injectors are compatible with E85 and other alcohol-based fuels, but Fuel Injector Clinic recommends following proper maintenance procedures whenever the vehicle will sit unused for extended periods.
Can these injectors be used with VP Import or Q16 fuel?
No. Fuel Injector Clinic specifically advises against using MTBE oxygenated fuels such as VP Import and Q16 because they can cause internal seal swelling that significantly reduces injector flow.
Why Buy From Beefcake Racing?
Beefcake Racing proudly offers genuine Fuel Injector Clinic products backed by experienced technical support. Whether you're building a dedicated race vehicle or a high horsepower street car, our knowledgeable team can help you choose the correct injector configuration for your application.
If you have questions about injector sizing, compatibility, or your custom fuel system, contact our team before placing your order.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
