Fuel Injector Clinic Six Cylinder 2150cc Custom Injector Set - 53mm Height - 11mm Top O-Ring Diameter - 11mm Bottom O-Ring Diameter (2150-53-11-11-6)
Engineered for serious horsepower builds, the Fuel Injector Clinic 2150cc Custom Injector Set delivers the massive fuel capacity required for high-output six-cylinder engines while maintaining exceptional drivability. Unlike many injectors of this size, these advanced high-flow injectors provide impressive low pulse width control for smoother idle quality and more predictable part-throttle operation. Each custom injector set is built to your specified dimensions and includes solder-in pigtails for custom installations.
Every injector is individually tested and dynamically flow matched using Fuel Injector Clinic's proprietary Data Match Technology, providing exceptional consistency from cylinder to cylinder. Each injector receives its own serial number and is accompanied by a comprehensive Data Match Sheet with individual flow and latency data, making ECU calibration more accurate and repeatable. All injectors are flow tested at 43.5 PSI (3 Bar) using CF-16B calibration fluid at 90 degrees F and are backed by Fuel Injector Clinic's Lifetime Warranty against manufacturing defects.
Specifications
- Manufacturer: Fuel Injector Clinic
- Product Code: 2150-53-11-11-6
- Part Number: ISC-2150H-6
- Injector Flow Rate: 2150cc/min
- Injector Height: 53mm
- Top O-Ring Diameter: 11mm
- Bottom O-Ring Diameter: 11mm
- Engine Configuration: 6 Cylinder
- Impedance: High Impedance
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Calibration Fluid: CF-16B at 90 degrees F
- Includes: Six matched injectors, solder-in pigtails, Data Match Sheet, required O-rings
- Warranty: Lifetime Warranty against manufacturing defects
Features
- Custom matched 2150cc injector set for six-cylinder engines
- 53mm injector height with 11mm top and 11mm bottom O-ring configuration
- Includes solder-in pigtails for custom applications
- Fuel Injector Clinic proprietary Data Match Technology
- Each injector individually flow matched and serial numbered
- Detailed Data Match Sheet with flow and latency values included
- Excellent short pulse width control for improved idle quality and drivability
- Flow tested at 43.5 PSI (3 Bar) using CF-16B calibration fluid
- Includes all required O-rings for the specified injector configuration
- Backed by Fuel Injector Clinic's Lifetime Warranty
Important Fuel Compatibility Information
CAUTION: The internal construction of this 2150cc injector contains a seal that has been found to swell when exposed to MTBE found in oxygenated race fuels such as VP Import and Q16. This swelling can significantly reduce injector flow, making these injectors unsuitable for use with MTBE oxygenated fuels.
When operating on alcohol-based fuels such as E85, Fuel Injector Clinic recommends following proper injector maintenance procedures. Extended storage while exposed to alcohol fuels may increase the possibility of corrosion if proper care guidelines are not followed.
Fitment
Custom six-cylinder applications requiring:
- 53mm injector height
- 11mm top O-ring diameter
- 11mm bottom O-ring diameter
FAQs
What is Data Match Technology?
Fuel Injector Clinic's proprietary Data Match Technology dynamically matches each injector for exceptional consistency. Every set includes a detailed Data Match Sheet with individual flow and latency values to simplify ECU tuning.
Can these injectors be used with E85?
Yes. These injectors are compatible with E85 and other alcohol-based fuels, but proper maintenance should be followed if the vehicle will remain unused for extended periods.
Are these injectors compatible with VP Import or Q16 race fuel?
No. Fuel Injector Clinic specifically advises against using these 2150cc injectors with MTBE oxygenated fuels such as VP Import and Q16 due to internal seal compatibility.
Why Buy From Beefcake Racing?
When you purchase Fuel Injector Clinic products from Beefcake Racing, you're getting genuine components backed by enthusiasts who understand high-performance fuel systems. Whether you're building a street car, drag car, or dedicated race vehicle, we'll help you select the correct injector configuration for your horsepower goals and fuel system requirements.
If you have questions about injector sizing or your custom application, contact our knowledgeable team for expert assistance.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
