Fuel Injector Clinic Eight Cylinder 1440cc SHORT Custom Injector Set - 38mm Height - 14mm Top O-Ring - 15mm Bottom O-Ring (1440-38-14-15-8)
Build your custom 8-cylinder fuel system around serious flow capability and proven injector control with the Fuel Injector Clinic 1440cc SHORT Custom Injector Set. Positioned between FIC's 1200cc and 1650cc injectors, the 1440cc high-impedance injector delivers the fuel capacity needed for high-horsepower combinations while maintaining excellent idle performance in street-driven cars. This SHORT configuration measures 38mm in height with a 14mm top O-ring diameter and 15mm bottom O-ring diameter, making it a purpose-built option for custom fuel systems requiring these exact dimensions.
Fuel Injector Clinic builds the 1440cc injector with stainless alloy valve construction for broad fuel compatibility, including pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Each eight-injector set is precisely matched using FIC's proprietary Data Match Technology, with every injector individually serial numbered and its results documented on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 psi (3 Bar) at a fuel temperature of 90 degrees F using CF-16B calibration fluid. Superior short pulse width control and state-of-the-art matching help provide the tunability and drivability performance enthusiasts need from a high-flow injector.
Specifications
- Manufacturer: Fuel Injector Clinic
- Product Code: 1440-38-14-15-8
- FIC Part Number: ISC-1440H-8
- Injector Flow Rate: 1440cc/min
- Injector Type: High impedance
- Engine Configuration: 8-cylinder
- Injector Quantity: 8
- Injector Height: 38mm SHORT
- Top O-Ring Diameter: 14mm
- Bottom O-Ring Diameter: 15mm
- Valve Construction: Stainless alloy
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Injector Identification: Individually serial numbered
- Documentation: Data Match Sheet with flow matching and latency value information
- Test Pressure: 43.5 psi (3 Bar)
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included: Solder-in pigtails and O-rings for the specified configuration
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of eight 1440cc high-performance fuel injectors
- 38mm SHORT injector configuration for custom fuel system installations
- High-impedance injector design
- 1440cc flow rate positioned between FIC's 1200cc and 1650cc injector offerings
- Excellent idle performance for street-driven performance vehicles
- Supports higher horsepower output on both E85 and gasoline
- Stainless alloy valve construction supports broad fuel compatibility
- Compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Precisely matched using Fuel Injector Clinic's proprietary Data Match Technology
- Each injector is individually serial numbered for identification and documentation
- Included Data Match Sheet provides detailed flow matching and latency value information
- Superior short pulse width control helps provide excellent tunability and drivability
- Flow tested and rated at 43.5 psi (3 Bar) at 90 degrees F fuel temperature
- Tested using CF-16B calibration fluid
- 38mm height with 14mm top and 15mm bottom O-ring configuration
- Solder-in pigtails included for custom installation requirements
- O-rings included for the specified injector configuration
- Backed by Fuel Injector Clinic's lifetime warranty against qualifying manufacturing defects
Fitment
Custom 8-cylinder applications requiring 1440cc high-impedance SHORT injectors with a 38mm height, 14mm top O-ring diameter, and 15mm bottom O-ring diameter.
This custom injector set does not have vehicle-specific fitment. For aftermarket fuel rails, intake systems, or other non-standard fuel system configurations, verify the required injector height and O-ring dimensions before ordering to ensure proper fitment.
FAQs
What fuels can Fuel Injector Clinic 1440cc injectors be used with?
The stainless alloy valve construction provides broad fuel compatibility. Fuel Injector Clinic lists pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels, giving builders flexibility when choosing fuel for street, performance, and race applications.
What makes this the SHORT version of the FIC 1440cc injector set?
This configuration uses a 38mm injector height and is specifically configured with a 14mm top O-ring and 15mm bottom O-ring. Because this is a custom injector set rather than a vehicle-specific application, the required dimensions should be verified against the fuel rail and intake configuration before ordering.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Choosing the correct injectors for a custom fuel system requires more than matching flow rate. Injector height, O-ring dimensions, fuel compatibility, and the rest of the fuel system all need to work together. Beefcake Racing can help you select the right Fuel Injector Clinic injectors and supporting components for your build. Have questions about this 1440cc SHORT custom injector set or your fuel system setup? Call Beefcake Racing at 1-855-827-7223 or email sales@beefcakeracing.com.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
