Fuel Injector Clinic Eight Cylinder 445cc Custom Injector Set - 64mm Height - 11mm Top O-Ring - 14mm Bottom O-Ring (0445-64-11-14-8)
Give your custom 8-cylinder fuel system the precise fuel delivery and consistent drivability it needs with the Fuel Injector Clinic 445cc Custom Injector Set. This eight-injector configuration combines a 445cc flow rate with a 64mm height, 11mm top O-ring diameter, and 14mm bottom O-ring diameter. Designed for custom applications requiring these exact dimensions, it delivers the controlled fueling, short pulse width performance, and tight manufacturing tolerances needed for a fuel system that is straightforward to tune and responsive on the street.
Fuel Injector Clinic precisely flow matches these high-performance injectors to within 1%, with each injector individually numbered and its results documented on the detailed flow sheet included with the set. Every injector is flow tested and rated at 43.5 psi (3 Bar) with fuel temperature at 90 degrees F using CF-16B calibration fluid. The set also includes solder-in pigtails and the O-rings required for the selected configuration. Fuel Injector Clinic backs every injector against failure caused by defects in original manufacture with its lifetime warranty.
Specifications
- Manufacturer: Fuel Injector Clinic
- Product Code: 0445-64-11-14-8
- FIC Part Number: ISC-0445H-8
- Injector Flow Rate: 445cc/min
- Engine Configuration: 8-cylinder
- Injector Quantity: 8
- Injector Height: 64mm
- Top O-Ring Diameter: 11mm
- Bottom O-Ring Diameter: 14mm
- Flow Matching: Precisely flow matched to within 1%
- Injector Identification: Individually numbered
- Documentation: Detailed injector flow sheet included
- Test Pressure: 43.5 psi (3 Bar)
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included: Solder-in pigtails and O-rings for the specified configuration
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete custom set of eight 445cc high-performance fuel injectors
- 64mm injector configuration with 11mm top and 14mm bottom O-rings
- Precisely flow matched to within 1% for consistent fuel delivery across the set
- Each injector is individually numbered for identification
- Detailed flow sheet documents the results for each injector in the set
- Superior short pulse width control supports precise low-pulse fueling
- Tight manufacturing tolerances help make the injectors easier to tune
- Designed to provide strong drivability in properly configured fuel systems
- Flow tested and rated at 43.5 psi (3 Bar)
- Testing performed at 90 degrees F fuel temperature using CF-16B calibration fluid
- Solder-in pigtails included for custom installation requirements
- Required O-rings included for the selected injector configuration
- Backed by Fuel Injector Clinic's lifetime warranty against qualifying manufacturing defects
Fitment
Custom 8-cylinder applications requiring 445cc fuel injectors with a 64mm height, 11mm top O-ring diameter, and 14mm bottom O-ring diameter.
This is a configurable custom injector set rather than a vehicle-specific application. Injector height and both O-ring dimensions should be verified against the fuel rail and intake setup before ordering. For aftermarket fuel rails or other unusual configurations, confirm the required dimensions to ensure the injectors fit properly.
FAQs
How closely matched are the injectors in this Fuel Injector Clinic 445cc set?
Fuel Injector Clinic precisely flow matches the injectors in the set to within 1%. Each injector is individually numbered, and the results for each injector are provided on the detailed flow sheet included with the set.
How do I know if the 0445-64-11-14-8 configuration will fit my fuel system?
This specific configuration uses a 64mm injector height with an 11mm top O-ring and 14mm bottom O-ring. Because it is intended for custom applications rather than one specific vehicle, verify all three dimensions against your fuel rail and intake setup before ordering.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Getting the right injector set means matching more than flow rate. Injector height, O-ring dimensions, fuel system hardware, and your overall combination all matter. Beefcake Racing can help you select the correct Fuel Injector Clinic injectors and supporting fuel system components for your build. Have questions about this 445cc custom injector set? Call Beefcake Racing at 1-855-827-7223 or email sales@beefcakeracing.com.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
