Fuel Injector Clinic Eight Cylinder 445cc Custom Injector Set - 53mm Height - 11mm Top O-Ring - 21mm Bottom O-Ring (0445-53-11-21-8)
Give your custom 8-cylinder fuel system the precise fuel delivery and consistent drivability it needs with the Fuel Injector Clinic 445cc Custom Injector Set. This eight-injector configuration combines a 445cc flow rate with a 53mm height, 11mm top O-ring diameter, and 21mm bottom O-ring diameter. Designed for custom applications requiring these dimensions, this set brings together carefully matched fuel delivery, superior short pulse width control, and tight manufacturing tolerances for an injector package that is easy to tune and delivers excellent drivability.
Fuel Injector Clinic precisely flow matches these high-performance injectors to within 1%, with each injector individually numbered and its results documented on the detailed flow sheet included with the set. Every injector is flow tested and rated at 43.5 psi (3 Bar) with fuel temperature at 90 degrees F using CF-16B calibration fluid. Custom injector sets include solder-in pigtails and the O-rings required for the specified configuration. Every injector is also covered against failure caused by defects in original manufacture by Fuel Injector Clinic's lifetime warranty.
Specifications
- Manufacturer: Fuel Injector Clinic
- Product Code: 0445-53-11-21-8
- FIC Part Number: ISC-0445H-8
- Injector Flow Rate: 445cc/min
- Engine Configuration: 8-cylinder
- Injector Quantity: 8
- Injector Height: 53mm
- Top O-Ring Diameter: 11mm
- Bottom O-Ring Diameter: 21mm
- Flow Matching: Precisely flow matched to within 1%
- Injector Identification: Individually numbered
- Documentation: Detailed injector flow sheet included
- Test Pressure: 43.5 psi (3 Bar)
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included: Solder-in pigtails and O-rings for the specified configuration
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete custom set of eight 445cc high-performance fuel injectors
- 53mm injector configuration with 11mm top and 21mm bottom O-rings
- Precisely flow matched to within 1% for consistent fuel delivery across the set
- Each injector is individually numbered for identification
- Detailed flow sheet provides results for each injector in the set
- Superior short pulse width control supports precise fuel delivery
- Tight manufacturing tolerances help make the injectors easy to tune
- Engineered to provide excellent drivability in properly configured fuel systems
- Flow tested and rated at 43.5 psi (3 Bar)
- Testing performed at 90 degrees F fuel temperature using CF-16B calibration fluid
- Solder-in pigtails included for custom installation requirements
- Required O-rings included for the specified injector configuration
- Backed by Fuel Injector Clinic's lifetime warranty against qualifying manufacturing defects
Fitment
Custom 8-cylinder applications requiring 445cc fuel injectors with a 53mm height, 11mm top O-ring diameter, and 21mm bottom O-ring diameter.
This is a custom injector configuration rather than a vehicle-specific fitment. Injector height and both O-ring dimensions should be verified against the fuel rail and intake setup before ordering. For aftermarket fuel rails or other unusual setups, confirm the required dimensions to make sure the injectors fit properly.
FAQs
How closely matched are the injectors in this Fuel Injector Clinic 445cc set?
Fuel Injector Clinic precisely flow matches the injectors in the set to within 1%. Each injector is individually numbered, and its results are listed on the detailed flow sheet included with the set.
How do I know if the 0445-53-11-21-8 configuration is right for my fuel system?
This configuration uses a 53mm injector height with an 11mm top O-ring and 21mm bottom O-ring. Because this is a custom injector set rather than a vehicle-specific application, verify the injector height and O-ring dimensions against your fuel rail and intake setup before ordering.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Getting the right injector set means matching more than flow rate. Injector height, O-ring dimensions, fuel system hardware, and your overall combination all matter. Beefcake Racing can help you select the correct Fuel Injector Clinic injectors and supporting fuel system components for your build. Have questions about this 445cc custom injector set? Call Beefcake Racing at 1-855-827-7223 or email sales@beefcakeracing.com.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
