Fuel Injector Clinic Four Cylinder 365cc Custom Injector Set - 53mm Height - 14mm Top O-Ring Diameter - 15mm Bottom O-Ring Diameter (Product Code: 0365-53-14-15-4) - ISC-0365H-4
The Fuel Injector Clinic 365cc Custom Injector Set is an excellent solution for four-cylinder performance builds requiring dependable fueling, outstanding drivability, and OEM-like tuning characteristics. Designed with a 53mm injector height, 14mm top O-ring diameter, and 15mm bottom O-ring diameter, this custom high impedance injector set is ideal for naturally aspirated, turbocharged, and supercharged applications that require moderate fuel flow with exceptional consistency. Tight manufacturing tolerances and outstanding short pulse width control make these injectors easy to calibrate while maintaining smooth idle quality and crisp throttle response.
Each injector is individually numbered and precision flow matched to within 1%, ensuring consistent cylinder-to-cylinder fueling. Every injector is flow tested at 43.5 PSI (3 Bar) at 90 degrees F using CF-16B calibration fluid and includes solder-in pigtails, the proper O-rings for the specified dimensions, and a detailed flow sheet. Every injector set is backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects for long-term confidence.
Quick Specs
- Manufacturer: Fuel Injector Clinic
- Part Number: ISC-0365H-4
- Product Code: 0365-53-14-15-4
- Injector Quantity: Set of Four
- Engine Configuration: Four Cylinder
- Flow Rate: 365cc/min
- Injector Type: High Impedance
- Injector Height: 53mm
- Top O-Ring Diameter: 14mm
- Bottom O-Ring Diameter: 15mm
- Flow Matching: Precision Matched to Within 1%
- Flow Tested: 43.5 PSI (3 Bar) at 90 degrees F using CF-16B Calibration Fluid
- Included: Four Injectors, Solder-In Pigtails, Required O-Rings, and Detailed Flow Sheet
- Warranty: Lifetime Warranty Against Manufacturing Defects
Features
- Custom four-cylinder injector set with a 53mm body, 14mm top O-ring, and 15mm bottom O-ring configuration.
- 365cc/min high impedance injectors for naturally aspirated, turbocharged, and supercharged applications.
- Precision flow matched to within 1% for excellent cylinder-to-cylinder consistency.
- Superior short pulse width control for smooth idle quality and excellent drivability.
- Tight manufacturing tolerances simplify ECU calibration and tuning.
- Flow tested at 43.5 PSI (3 Bar) at 90 degrees F using CF-16B calibration fluid.
- Each injector is individually numbered and supplied with a detailed flow sheet.
- Includes solder-in pigtails for custom wiring installations.
- Supplied with all required O-rings for the specified injector dimensions.
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects.
Fitment
- Custom four-cylinder engine applications
- Applications requiring a 53mm injector height
- Applications requiring a 14mm top O-ring diameter
- Applications requiring a 15mm bottom O-ring diameter
This injector set is intended for custom applications and is not vehicle specific. Compatibility is determined by injector height, O-ring dimensions, fuel rail, intake manifold, electrical connector, and engine management system. Verify all measurements before ordering. If you are using an aftermarket or specialized fuel system configuration, contact Beefcake Racing before placing your order to ensure you receive the correct injector setup.
FAQs
Why are Fuel Injector Clinic 365cc injectors easy to tune?
These injectors feature excellent short pulse width control, tight manufacturing tolerances, and precision flow matching within 1%. Together, these characteristics provide consistent fueling, smooth idle quality, predictable drivability, and straightforward ECU calibration.
Are these injectors intended for a specific vehicle?
No. This is a custom injector set designed for applications requiring a 53mm injector height with a 14mm top O-ring and a 15mm bottom O-ring diameter. Always verify your injector dimensions and fuel system compatibility before ordering.
Why Buy From Beefcake Racing?
When you purchase Fuel Injector Clinic products from Beefcake Racing, you're buying from enthusiasts who understand custom fuel systems. Our knowledgeable team can help verify injector dimensions, fuel system compatibility, and application requirements to ensure you receive the correct injector set for your build.
If you have questions before ordering, contact us at sales@beefcakeracing.com or call 1-855-827-7223. We're here to help you build with confidence.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
