Fuel Injector Clinic Eight Cylinder 365cc Custom Injector Set - 53mm Height - 11mm Top O-Ring - 14mm Bottom O-Ring (0365-53-11-14-8)
Give your custom 8-cylinder fuel system the precise, consistent fuel delivery it needs with this Fuel Injector Clinic 365cc Custom Injector Set. Configured with a 53mm height, 11mm top O-ring diameter, and 14mm bottom O-ring diameter, this complete eight-injector set is designed for applications requiring this specific injector configuration. Fuel Injector Clinic combines precise flow matching, excellent short pulse width control, and tight manufacturing tolerances to deliver injectors that are straightforward to tune while maintaining strong drivability. Solder-in pigtails are included with the custom injector set.
Fuel Injector Clinic precisely flow matches the injectors in each set to within 1 percent. Every injector is individually numbered, and its results are documented on the detailed flow sheet supplied with the set. The injectors are flow tested and rated at 43.5 psi (3 Bar) at a fuel temperature of 90 degrees F using CF-16B calibration fluid. The set also includes the O-rings required for the specified configuration and is backed by Fuel Injector Clinic's lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Product Code: 0365-53-11-14-8
- FIC Part Number: ISC-0365H-8
- Injector Flow Rate: 365cc/min
- Engine Configuration: 8-cylinder
- Injector Quantity: 8
- Injector Height: 53mm
- Top O-Ring Diameter: 11mm
- Bottom O-Ring Diameter: 14mm
- Flow Matching: Precisely matched to within 1 percent
- Test Pressure: 43.5 psi (3 Bar)
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included: Solder-in pigtails and O-rings for the specified configuration
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete matched set of eight 365cc high-performance fuel injectors
- Precisely flow matched to within 1 percent for consistent injector-to-injector fuel delivery
- Each injector is individually numbered with results documented on the included flow sheet
- Superior short pulse width control helps provide precise fueling and excellent drivability
- Tight manufacturing tolerances help make calibration more predictable and easier to manage
- Flow tested and rated at 43.5 psi (3 Bar) at 90 degrees F fuel temperature
- Tested using CF-16B calibration fluid
- 53mm height for custom fuel system configurations requiring this injector dimension
- 11mm top O-ring and 14mm bottom O-ring configuration
- Solder-in pigtails included with the custom injector set
- Required O-rings included for the specified injector configuration
- Covered by Fuel Injector Clinic's lifetime warranty against qualifying manufacturing defects
Fitment
Custom 8-cylinder applications requiring 365cc injectors with a 53mm height, 11mm top O-ring diameter, and 14mm bottom O-ring diameter.
This is a custom injector configuration and does not have vehicle-specific fitment. For aftermarket fuel rails or other unusual fuel system setups, verify the required injector height and O-ring dimensions before ordering to ensure proper fitment.
FAQs
Are these Fuel Injector Clinic 365cc injectors flow matched?
Yes. Fuel Injector Clinic precisely flow matches the injectors in this eight-injector set to within 1 percent. Each injector is individually numbered, and its results are provided on the detailed flow sheet included with the set.
How do I know if the 53mm, 11mm top, and 14mm bottom configuration is right for my application?
Because this is a custom injector set rather than a vehicle-specific application, confirm that your fuel rail and intake setup require a 53mm injector height, 11mm top O-ring diameter, and 14mm bottom O-ring diameter. Aftermarket and non-standard fuel systems can have different dimensional requirements.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Choosing the correct injector configuration is critical to building a fuel system that fits and performs properly. Beefcake Racing can help you select the right Fuel Injector Clinic injectors and supporting components for your performance combination. Have questions about this 365cc custom injector set or your fuel system setup? Call Beefcake Racing at 1-855-827-7223 or email sales@beefcakeracing.com.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
