null

Fore Innovations Triple Fuel Pump Module (2013 - 2017 Viper) 67-900

Image is a representation of this item.
Actual item may vary.

Item#:
fore-67-900
Price: $1,019.00
(No reviews yet) Write a Review

Fore Innovations Triple Fuel Pump Module (67-900) - 2013-2017 Dodge Viper

The Fore Innovations Triple Fuel Pump Module is a high-capacity return-style fuel pump module for 2013-2017 Dodge Viper applications. Capable of supporting up to 2,000 RWHP depending on the selected pumps, fuel system configuration, engine efficiency, and fuel type, this module provides the foundation for extreme high-horsepower Viper fuel systems.

The module retains the OE fuel level sender while replacing the inaccurate static OE regulator. Return fuel is discharged low in the tank through the module to help prevent aeration and disruption of the fuel pump intake.

Features

  • Triple fuel pump module
  • Supports up to 2,000 RWHP depending on fuel pump configuration, fuel system configuration, engine efficiency, and fuel type
  • Return-style fuel system applications only
  • ORB-10 female feed port with 7/8-14 threads
  • ORB-8 female return port with 3/4-16 threads
  • E85 and race fuel compatible when used with fuel pumps approved for the selected fuel
  • Discharges return fuel low in the tank through the module to help prevent aeration and disruption of pump intake
  • Accepts the OE fuel level sender
  • Viton O-ring pump seals eliminate in-tank fuel hose failures
  • Deletes the inaccurate static OE fuel pressure regulator
  • Polymer pump support helps eliminate pump body electrolysis and minimize noise
  • Hermetic wire seal helps eliminate the possibility of fuel leaks and odor through the electrical pass-through
  • Broad range of fuel pump compatibility

Fuel System Requirements

This fuel pump module requires upgraded fuel filtration, regulation, fuel lines, and electrical system components. Fore Innovations complete Viper fuel systems are available for applications requiring the supporting fuel system components.

Supported power level depends on the selected fuel pumps, overall fuel system configuration, engine efficiency, and fuel type. Contact us for application assistance when selecting the appropriate configuration.

Fitment

- 2013 Dodge Viper
- 2014 Dodge Viper
- 2015 Dodge Viper
- 2016 Dodge Viper
- 2017 Dodge Viper

Available Options and Upgrades

Electrical Options

  • None: Base module configuration with approximately 6"""" of fuel pump power wire extending from the hermetic seal.
  • FC2 Controller with 6-Gauge Wiring: Operates both pumps simultaneously using factory control. Best for two smaller street-duty pumps or two large pumps in track applications where increased fuel heat is less of a concern. Can control secondary pumps on a triple-pump module when a small primary pump is powered by the OEM harness. Includes 14' of 6 AWG power wire, 100-amp fuse, 3' ground wire, 7' 12 AWG pump leads, and sealed Delphi connector.
  • FC3 Staged Controller with 4-Gauge Wiring: Independently controls the secondary pump(s) from the primary pump using factory control plus a secondary trigger. Recommended for two or three large pumps in street applications to help minimize fuel heat. Includes 14' of 4 AWG power wire, 100-amp fuse, 3' ground wire, 7' 12 AWG pump leads, and sealed Delphi connector.
  • Delphi Connector / Pigtail Only: Includes a sealed Delphi connector and 7' of 12 AWG pump leads. Installer is responsible for supplying and properly configuring the required fuses and relays.

Additional System Options

  • Honeywell Pressure Switch for FC3: 1/8"""" NPT male pressure switch designed for installation in the intake manifold. Must receive both boost and vacuum signals.

Fuel Pump Warranty: 

We take great pride in our product line since we design, machine, assemble, and package our products entirely in house. We guarantee our products to be free of defects in materials and workmanship to the original purchaser. Due to the highly technical nature of our products, we recommend only experienced and competent individuals and shops install our products and systems.

 

We cannot accept returns on injectors or pumps that have been in contact with fuel.

 

Fore Innovations, LLC does not warranty any product that have been damaged or rendered defective as a result of accident, misuse, or abuse. Additionally, Fore Innovations is not responsible for special, incidental, or consequential damages or costs incurred due to the installation, use, or misuse of our products.

 

We will gladly refund any parts that are received in new resalable condition and accompanied with a Return Authorization Number to the original purchaser. Fore Innovations will not be responsible for any items sent to us without a Return Authorization Number.

 

TI Automotive (and Walbro) fuel pumps are sold only with TI Automotive’s warranty. Currently, TI Automotive does not have a warranty on their high performance parts. For more information:

 fore-warranty-qr.jpg

https://aftermarket.tiautomotive.com/wp-content/uploads/2019/09/TI-Automotive-Stock-Replacement-Part-Warranty.pdf

CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov