null

Fore Innovations Fuel System Level 1E Dual Pump (1996-2004 Mustang GT 4V) 55-621E

Image is a representation of this item.
Actual item may vary.

Item#:
fore-55-621e
Price: $1,249.10
(No reviews yet) Write a Review
700+ rwhp capable return fuel system uses the factory fuel rails. Supply fuel is regulated before entering the factory fuel rails. Proper upgraded feed line and filtration included. Perfect system for applications where factory fuel rails must be used.
  • 700+ rwhp E85 capable fuel capable return conversion
  • Uses OE fuel rails
  • Built with high end components, upgradeable to 1200+ rwhp
INCLUDES
  • SN95 Fuel Pump Module (dual pump)
  • F1i Fuel Pressure Regulator
  • 88mm Inline Fuel Filter
  • All fittings, hose, and hardware necessary to complete typical fuel line plumbing
    • 30 feet fuel line (your choice of Startite or PTFE)
    • Qty 8 compression style billet hose ends
    • Qty 2, low profile 90 degree billet o-ring fittings
    • Qty 5, straight AN to o-ring fittings
    • Qty 8, hose straps with stainless mounting screws
    • Qty 1, 1/2 Springlock (male) to AN-8 (male) adapter

 

Electrical Upgrade

None: base module configuration, 6" [150mm] of pump power wire protrude from top of hermetic seal

 

FC2 Controller with 6 gauge wiring:

- Operates both pumps simultaneously, using factory control

- Best for controlling two small fuel pumps for street duty, or two large fuel pumps for track use only (due to fuel heat)

- May be used for control of secondary pumps with triple module IF [a small] primary pump can be run by OEM harness

- Includes 14' [4.2m] of 6 AWG power wire and 100 amp fuse

- Includes 3' [.9m] of 6 AWG ground wire with ring terminal

- Includes 7' [2.1m] 12 AWG pump leads and sealed Delphi connector at pump module

 

FC3 Staged Controller with 4 gauge wiring:

- Operates secondary pump(s) independently from primary pump using factory control in conjunction with a secondary trigger source.

- Best for controlling two or three large fuel pumps for street duty and minimizing heat

- Includes 14' [4.2m] of 4 AWG power wire and 100 amp fuse

- Includes 3' [.9m] of 4 AWG ground wire with ring terminal

- Includes 7' [2.1m] 12 AWG pump leads and sealed Delphi connector at pump module

 

Filtration Media

CELLULOSE FILTER ELEMENT

- cellulose element, bonded aluminum endcaps, Viton o-ring

- provides 10 micron nominal, 14 micron absolute filtration

- use with gasoline and race gas

- disposable

- recommended filtration for use with Injector Dynamics fuel injectors

 

MICROGLASS SSD (ANTI-STATIC) FILTER ELEMENT

- microglass element, static dissipating, bonded aluminum endcaps, Viton o-ring

- provides 12 micron absolute filtration

- use with all fuel types and blends (i.e. gasoline, race gas, E85, E100, M5, diesel)

- disposable

- recommended filtration for use with Injector Dynamics fuel injectors

 

STAINLESS FILTER ELEMENT

- stainless element, stainless endcaps, Viton o-ring

- provides 10 micron nominal, 26 micron absolute filtration

- use with all fuel types and blends (i.e. gasoline, race gas, E85, E100, M5, diesel)

-re-usable

 

Fuel Filter Upgrades

Upgrade to 128mm Filter

- Upgrade from standard 88mm filter to 128mm filter length for more filtration capacity and more time between service intervals.

 

Billet Mounting Bracket

- Use it to mount filter under car body, show quality installation to secure mounting of filter assembly for ease of maintenance

 

Filter Monitoring Gauge and Fitting

- Use to monitor fuel pressure before filter to inspect filter health. A higher pressure before filter indicates loss across the filter. If ignored, substantial filter obstruction will lead to reduced pump performance, shortened pump life, and higher fuel heat. Fitting is includes to allow precise orientation of pressure gauge.

 

System Options

Honeywell Pressure Switch for FC3

- 1/8 NPT Male threads, installs in intake manifold, must see boost and vacuum

 

Boost Vacuum Manifold Kit

- Our Boost / Vacuum manifold kit includes the following: Fore Innovations Boost / Vacuum Manifold (3 x 1/4" barb fittings, 4 x plugs)

 

APPLICATIONS:

- 1999 SVT Cobra

- 2001 SVT Cobra

- 2003 SVT Cobra

- 2004 SVT Cobra

- 2003 Mach 1

- 2004 Mach 1

- 1999 Mustang GT and V6

- 2000 Mustang GT and V6

- 2001 Mustang GT and V6

- 2002 Mustang GT and V6

- 2003 Mustang GT and V6

- 2004 Mustang GT and V6

CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov