It is strongly recommended to replace the OE internal tank lines when servicing the fuel tanks. (contact sales@foreinnovations.com for details)
Includes secondary OE regulator bypass plug (replaces regulator in the passenger side tank) so that fuel transfer will occur when boost/vacuum referenced or when running lower fuel pressure than stock settings.
Use in conjunction with a complete return style fuel system for 1600 rwhp with triple fuel pumps (recommended to run one pump full time, then activate secondary pumps under load). Retains OE fuel level sender, EVAP functionality, and tank transfer, and filler neck.
This component requires the use of external feed and return lines, external filtration (for injectors), external regulation, and an upgraded electrical system. Upgraded fuel rails and an inline check valve is recommended. Supplies port fuel injection and optional wet nitrous. See our complete fuel systems if the extra components are needed.
E85 requires F90000267, F90000274 or F90000285 fuel pumps.
This is part of a stand alone fuel system. Professional installation and a custom tune is required. Qualified installers must be able to interface to the OE harness and FPDM/FPCM (on certain models), understand proper component placement, hose routing, and deliver the vehicle with factory-like pump prime/on/off logic with no error codes. Fore Innovations will supply basic system schematics and detailed component level instructions, and can provide troubleshooting of the performance and function of our system and components.
This fuel system generates substantially more heat and capacity than the original fuel system. The high powered fuel pumps make much more heat than the factory pump and the composite fuel tank construction acts as an insulator and stores heat. The user (driver) must keep more fuel (than normal) in the tank at all times to minimize heat damage.
APPLICATIONS:
- 2003 C5 Corvette - all models
- 2004 C5 Corvette - all models
- 2005 C6 Corvette - all models
- 2006 C6 Corvette - all models
- 2007 C6 Corvette - all models
- 2008 C6 Corvette - all models
- 2009 C6 Corvette - all models
- 2010 C6 Corvette - all models
- 2011 C6 Corvette - all models
- 2012 C6 Corvette - all models
- 2013 C6 Corvette - all models
- 2007 C6 Corvette ZR1
- 2008 C6 Corvette ZR1
- 2009 C6 Corvette ZR1
- 2010 C6 Corvette ZR1
- 2011 C6 Corvette ZR1
- 2012 C6 Corvette ZR1
- 2013 C6 Corvette ZR1
- 2014 C6 Corvette ZR1
NOTES: Requires substantial support equipment. See complete fuel systems for a comprehensive solution. Depending on pump arrangement, lower assembly may be larger than tank opening. Partial disassembly must be accomplished in order to install fuel tank
