null

Fore Innovations Fuel System Level 2 Dual Pump (2003-2014 Corvette C5 / C6) 38-522

Image is a representation of this item.
Actual item may vary.

Item#:
fore-38-522
Price: $1,694.75
(No reviews yet) Write a Review
Depending on pump arrangement, lower assembly may be larger than tank opening. Partial disassembly must be accomplished in order to install in fuel tank

1200+ rwhp capable return fuel system with simple and efficient hose routing. The rails are in a series installation with the fuel pressure regulator AFTER the rails.
 
INCLUDES
  • 2003-2013 Corvette Dual Pump Module (wide / compact will be supplied based on pump selection)
  • 88mm Inline Fuel Filter
  • F2i Fuel Pressure Regulator
  • FCV Checkvalve
  • All fittings, hose, and hardware necessary to complete typical fuel line plumbing
-30 feet of fuel line (your choice)
-Qty 10, billet compression style hose ends
-Qty 7 billet low profile 90 degree AN to o-ring fittings
-Qty 3 billet straight AN to o-ring fittings
-Qty 1, billet o-ring plug
-Qty 1, billet 1/8 NPT plug
-Qty 10, hose straps with stainless mounting screws

 

Electrical Upgrade

None: base module configuration, 6" [150mm] of pump power wire protrude from top of hermetic seal

 

FC2 Controller with 6 gauge wiring:

- Operates both pumps simultaneously, using factory control

- Best for controlling two small fuel pumps for street duty, or two large fuel pumps for track use only (due to fuel heat)

- May be used for control of secondary pumps with triple module IF [a small] primary pump can be run by OEM harness

- Includes 14' [4.2m] of 6 AWG power wire and 100 amp fuse

- Includes 3' [.9m] of 6 AWG ground wire with ring terminal

- Includes 7' [2.1m] 12 AWG pump leads and sealed Delphi connector at pump module

 

FC3 Staged Controller with 4 gauge wiring:

- Operates secondary pump(s) independently from primary pump using factory control in conjunction with a secondary trigger source.

- Best for controlling two or three large fuel pumps for street duty and minimizing heat

- Includes 14' [4.2m] of 4 AWG power wire and 100 amp fuse

- Includes 3' [.9m] of 4 AWG ground wire with ring terminal

- Includes 7' [2.1m] 12 AWG pump leads and sealed Delphi connector at pump module

 

Filtration Media

CELLULOSE FILTER ELEMENT

- cellulose element, bonded aluminum endcaps, Viton o-ring

- provides 10 micron nominal, 14 micron absolute filtration

- use with gasoline and race gas

- disposable

- recommended filtration for use with Injector Dynamics fuel injectors

 

MICROGLASS SSD (ANTI-STATIC) FILTER ELEMENT

- microglass element, static dissipating, bonded aluminum endcaps, Viton o-ring

- provides 12 micron absolute filtration

- use with all fuel types and blends (i.e. gasoline, race gas, E85, E100, M5, diesel)

- disposable

- recommended filtration for use with Injector Dynamics fuel injectors

 

STAINLESS FILTER ELEMENT

- stainless element, stainless endcaps, Viton o-ring

- provides 10 micron nominal, 26 micron absolute filtration

- use with all fuel types and blends (i.e. gasoline, race gas, E85, E100, M5, diesel)

-re-usable

 

Fuel Filter Upgrades

Upgrade to 128mm Filter

- Upgrade from standard 88mm filter to 128mm filter length for more filtration capacity and more time between service intervals.

 

Billet Mounting Bracket

- Use it to mount filter under car body, show quality installation to secure mounting of filter assembly for ease of maintenance

 

Filter Monitoring Gauge and Fitting

- Use to monitor fuel pressure before filter to inspect filter health. A higher pressure before filter indicates loss across the filter. If ignored, substantial filter obstruction will lead to reduced pump performance, shortened pump life, and higher fuel heat. Fitting is includes to allow precise orientation of pressure gauge.

 

System Options

Honeywell Pressure Switch for FC3

- 1/8 NPT Male threads, installs in intake manifold, must see boost and vacuum

 

Boost Vacuum Manifold Kit

- Our Boost / Vacuum manifold kit includes the following: Fore Innovations Boost / Vacuum Manifold (3 x 1/4" barb fittings, 4 x plugs)

 

APPLICATIONS:

- 2003 C5 Corvette - all models

- 2004 C5 Corvette - all models

- 2005 C6 Corvette - all models

- 2006 C6 Corvette - all models

- 2007 C6 Corvette - all models

- 2008 C6 Corvette - all models

- 2009 C6 Corvette - all models

- 2010 C6 Corvette - all models

- 2011 C6 Corvette - all models

- 2012 C6 Corvette - all models

- 2013 C6 Corvette - all models

- 2007 C6 Corvette ZR1

- 2008 C6 Corvette ZR1

- 2009 C6 Corvette ZR1

- 2010 C6 Corvette ZR1

- 2011 C6 Corvette ZR1

- 2012 C6 Corvette ZR1

- 2013 C6 Corvette ZR1

- 2014 C6 Corvette ZR1

CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov