DSE Steering Shaft - Ididit Column - 3/4-Inch DD Output (1969 - 1976 Chevrolet Corvette with SpeedRay) - 092526DS
Complete the steering connection on your SpeedRay-equipped C3 Corvette with the Detroit Speed 092526DS Steering Shaft Kit. Designed for 1969 - 1976 Chevrolet Corvette applications using the Detroit Speed SpeedRay front suspension and an Ididit steering column with a 3/4-inch DD output shaft, this kit provides the components required to connect the steering column to the SpeedRay rack-and-pinion input. It is a purpose-built solution for properly integrating the column and rack rather than piecing together a steering shaft from unrelated components.
Detroit Speed builds its steering coupler U-joints from high-quality steel using modern CNC machining technology. Staked needle-bearing caps, similar to those used in OEM automotive U-joints, help prevent loosening and adjustment problems. The kit includes a 14-inch-long 3/4-inch DD steering shaft along with the required 3/4-inch DD x 3/4-inch DD and 17mm-36 x 3/4-inch DD U-joints. Because steering-column and vehicle combinations can affect the required intermediate-shaft length, Detroit Speed provides instructions for measuring and determining the proper final shaft length during installation.
Specifications
- Part Number: 092526DS
- Manufacturer: Detroit Speed
- Product Type: Steering Shaft / Steering Coupler Kit
- Application: Detroit Speed SpeedRay Front Suspension
- Steering Column: Ididit
- Column Output Shaft: 3/4-inch DD
- Steering Shaft: 3/4-inch DD
- Supplied Steering Shaft Length: 14 inches
- Column-Side U-Joint: 3/4-inch DD x 3/4-inch DD
- Rack-Side U-Joint: 17mm-36 x 3/4-inch DD
- U-Joint Material: Steel
Features
- Designed specifically for Detroit Speed SpeedRay front suspension applications
- Connects an Ididit column with 3/4-inch DD output to the SpeedRay rack-and-pinion steering system
- Includes a 14-inch-long 3/4-inch DD intermediate steering shaft
- Includes 3/4-inch DD x 3/4-inch DD U-joint
- Includes 17mm-36 x 3/4-inch DD U-joint for the rack-and-pinion connection
- Steering coupler U-joints utilize modern CNC machining technology
- U-joints are manufactured from high-quality steel
- Staked needle-bearing caps help prevent loosening and adjustment malfunction
- Provides a matched steering connection for the SpeedRay system rather than requiring individually sourced coupler components
Installation Notes
Detroit Speed instructs installers to determine the required intermediate steering-shaft length based on the specific installation. Measure from the end of the steering column to the end of the steering shaft on the rack and subtract 3 inches to determine the required shaft length. Proper U-joint orientation and installation procedures should be followed according to the Detroit Speed instructions.
Fitment
- 1969 Chevrolet Corvette with Detroit Speed SpeedRay Front Suspension and Ididit Column
- 1970 Chevrolet Corvette with Detroit Speed SpeedRay Front Suspension and Ididit Column
- 1971 Chevrolet Corvette with Detroit Speed SpeedRay Front Suspension and Ididit Column
- 1972 Chevrolet Corvette with Detroit Speed SpeedRay Front Suspension and Ididit Column
- 1973 Chevrolet Corvette with Detroit Speed SpeedRay Front Suspension and Ididit Column
- 1974 Chevrolet Corvette with Detroit Speed SpeedRay Front Suspension and Ididit Column
- 1975 Chevrolet Corvette with Detroit Speed SpeedRay Front Suspension and Ididit Column
- 1976 Chevrolet Corvette with Detroit Speed SpeedRay Front Suspension and Ididit Column
FAQs
What steering column does the DSE 092526DS steering shaft fit?
Detroit Speed specifies this kit for 1969 - 1976 Chevrolet Corvette applications using an Ididit steering column with a 3/4-inch DD output shaft and the Detroit Speed SpeedRay front suspension system.
What U-joints are included with the 092526DS kit?
The kit includes one 3/4-inch DD x 3/4-inch DD U-joint and one 17mm-36 x 3/4-inch DD U-joint, along with the 3/4-inch DD intermediate steering shaft.
How long is the steering shaft supplied with DSE 092526DS?
Detroit Speed supplies a 14-inch-long 3/4-inch DD steering shaft. The required final shaft length should be determined during installation using Detroit Speed's measurement procedure.
Get Your Detroit Speed Steering Components from Beefcake Racing
Finish your Corvette's SpeedRay steering system with the correct Detroit Speed components from Beefcake Racing. If you have questions about the DSE 092526DS Steering Shaft Kit, SpeedRay compatibility or the steering components needed for your build, email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
