DSE Ford 9-Inch QuadraLink Housing - Torino Flange - Bare - 1982-1992 Camaro / Firebird - 071004DS
Give your third-generation F-Body a serious foundation for rear suspension and drivetrain performance with the Detroit Speed Ford 9-inch QuadraLink Housing. Part number 071004DS is engineered for 1982-1992 Chevrolet Camaro and Pontiac Firebird applications using the Detroit Speed QuadraLink rear suspension system. Instead of adapting a generic rear axle housing and fabricating suspension mounts, this application-specific housing comes with the QuadraLink brackets already TIG welded in place for a purpose-built installation.
Detroit Speed builds 071004DS around a heavy-duty round-back Ford 9-inch housing with TIG-welded 3-inch axle tubes featuring .218-inch wall thickness. Billet Torino housing ends provide the axle-end configuration, while an axle vent and fill and drain plugs are incorporated into the housing. The housing accepts rear brake packages using a 2.5-inch offset from AP, Baer, or Wilwood. This version is supplied in a bare finish and is the axle housing only, allowing you to select the center section, axle shafts, brakes, and other rear-end components that match your power level and intended use.
Specifications
- Part Number: 071004DS
- Product Type: Axle Housing
- Axle Style: Ford 9-Inch
- Carrier Style: Ford 9-Inch
- Suspension Style: QuadraLink
- Axle End Style: Torino
- Housing Design: Heavy-Duty Round Back
- Axle Tube Diameter: 3 Inches
- Axle Tube Wall Thickness: .218 Inch
- Housing Ends: Billet Torino Ends
- Axle Tubes: TIG Welded
- QuadraLink Brackets: TIG Welded
- Axle Vent: Included
- Fill Plug: Included
- Drain Plug: Included
- Rear Brake Package Offset Compatibility: 2.5 Inches
- Finish: Bare
- Quantity: One Housing
- Made in USA: Yes
Features
- Ford 9-inch housing engineered for Detroit Speed QuadraLink rear suspension applications
- Application-specific design for 1982-1992 Chevrolet Camaro and Pontiac Firebird
- Heavy-duty round-back housing construction
- 3-inch axle tubes with .218-inch wall thickness
- TIG-welded axle tubes for strength and precise construction
- Billet Torino housing ends
- QuadraLink suspension brackets TIG welded directly to the housing
- Integrated axle vent
- Fill and drain plugs included
- Accepts 2.5-inch-offset rear brake packages from AP, Baer, or Wilwood
- Bare finish allows the rear axle assembly to be completed and finished for the specific build
- Made in the USA
Fitment
- 1982 Chevrolet Camaro
- 1982 Pontiac Firebird
- 1983 Chevrolet Camaro
- 1983 Pontiac Firebird
- 1984 Chevrolet Camaro
- 1984 Pontiac Firebird
- 1985 Chevrolet Camaro
- 1985 Pontiac Firebird
- 1986 Chevrolet Camaro
- 1986 Pontiac Firebird
- 1987 Chevrolet Camaro
- 1987 Pontiac Firebird
- 1988 Chevrolet Camaro
- 1988 Pontiac Firebird
- 1989 Chevrolet Camaro
- 1989 Pontiac Firebird
- 1990 Chevrolet Camaro
- 1990 Pontiac Firebird
- 1991 Chevrolet Camaro
- 1991 Pontiac Firebird
- 1992 Chevrolet Camaro
- 1992 Pontiac Firebird
Fitment Note: Part number 071004DS is designed for 1982-1992 Chevrolet Camaro and Pontiac Firebird applications using the Detroit Speed QuadraLink rear suspension system. This product is the bare Ford 9-inch axle housing only and is not a complete rear axle assembly. Additional components are required to complete the rear end.
FAQs
Is DSE 071004DS a complete Ford 9-inch rear axle?
No. Part number 071004DS is the bare Ford 9-inch QuadraLink axle housing. Axle shafts, center section, brakes, and other components required to complete the rear axle assembly are not included.
Are the QuadraLink suspension brackets already installed?
Yes. Detroit Speed TIG welds the QuadraLink brackets directly to the housing, providing the application-specific mounting points needed for the Detroit Speed QuadraLink rear suspension system.
What rear brake offset does 071004DS accept?
Detroit Speed specifies compatibility with rear brake packages using a 2.5-inch offset from AP, Baer, or Wilwood.
Why Buy from Beefcake Racing?
Beefcake Racing is your source for proven performance suspension, chassis, and drivetrain components for serious street, Pro Touring, autocross, and track builds. If you need help matching this Detroit Speed QuadraLink housing with the correct axle shafts, center section, brakes, or supporting rear suspension components, our experienced team can help you put together the right combination. Email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
