DSE Ford 9-Inch Axle Shafts - Torino Flange - 31-Spline - 1/2-Inch-20 Studs - 1982-1992 Camaro / Firebird - 070910DS
Build your third-generation F-Body rear end for serious performance with Detroit Speed Ford 9-inch axle shafts. Part number 070910DS is a pair of high-strength 31-spline axle shafts engineered for 1982-1992 Chevrolet Camaro and Pontiac Firebird applications using the appropriate Ford 9-inch rear axle configuration. Designed to withstand demanding high-performance street, autocross, and track use, these axles combine high-strength steel construction with Torino flanges, a GM 5 x 4.75-inch wheel bolt pattern, and 1/2-inch-20 wheel studs.
Detroit Speed induction heat treats these axle shafts for strength and magnafluxes them as part of the manufacturing quality-control process. Press-on Torino flange bearings come already installed, saving an additional assembly step when putting together your rear axle. The 070910DS axle set uses a 31-spline configuration and 1/2-inch-20 wheel hardware, providing a performance-ready solution for properly configured Ford 9-inch rear axle conversions. The axle shafts are sold as a pair, and lug nuts are not included.
Specifications
- Part Number: 070910DS
- Product Type: Axle Shafts
- Axle Style: Ford 9-Inch
- Axle End Style: Torino Flange
- Axle Shaft Spline Quantity: 31
- Material: High-Strength Steel
- Wheel Stud Thread Size: 1/2-Inch-20
- Wheel Stud Length: 3 Inches
- Wheel Bolt Pattern: 5 x 4.75-Inch
- Bearings: Press-On Bearings Installed
- Quantity: Pair
- Lug Nuts Included: No
- Made in USA: Yes
Features
- 31-spline Ford 9-inch axle shafts engineered for extreme performance use
- High-strength steel construction
- Induction heat treated for increased strength and durability
- Magnafluxed as part of the quality-control process
- Torino flange axle ends
- Press-on Torino flange bearings come already installed
- 1/2-inch-20 by 3-inch wheel studs
- GM 5 x 4.75-inch wheel bolt pattern
- Engineered for high-performance street, autocross, and track applications
- Sold as a pair
- Made in the USA
Fitment
- 1982 Chevrolet Camaro
- 1982 Pontiac Firebird
- 1983 Chevrolet Camaro
- 1983 Pontiac Firebird
- 1984 Chevrolet Camaro
- 1984 Pontiac Firebird
- 1985 Chevrolet Camaro
- 1985 Pontiac Firebird
- 1986 Chevrolet Camaro
- 1986 Pontiac Firebird
- 1987 Chevrolet Camaro
- 1987 Pontiac Firebird
- 1988 Chevrolet Camaro
- 1988 Pontiac Firebird
- 1989 Chevrolet Camaro
- 1989 Pontiac Firebird
- 1990 Chevrolet Camaro
- 1990 Pontiac Firebird
- 1991 Chevrolet Camaro
- 1991 Pontiac Firebird
- 1992 Chevrolet Camaro
- 1992 Pontiac Firebird
Fitment Note: These axle shafts are designed for 1982-1992 Chevrolet Camaro and Pontiac Firebird applications using the appropriate Ford 9-inch rear axle configuration. This is an axle shaft set only and is not a direct replacement for the factory rear axle shafts. Verify your housing, differential spline count, brakes, wheel hardware, and complete rear axle configuration before ordering.
FAQs
What is included with DSE 070910DS?
Part number 070910DS includes a pair of 31-spline Ford 9-inch axle shafts with Torino flanges, 1/2-inch-20 by 3-inch wheel studs, and press-on bearings already installed. Lug nuts are not included.
What wheel bolt pattern does 070910DS use?
Detroit Speed specifies a 5 x 4.75-inch wheel bolt pattern for part number 070910DS.
Are the axle bearings already installed?
Yes. Detroit Speed supplies these axle shafts with the press-on Torino flange bearings already installed.
Why Buy from Beefcake Racing?
Beefcake Racing is your source for proven performance drivetrain, suspension, and chassis components for serious street, Pro Touring, autocross, and track builds. If you need help matching these Detroit Speed axle shafts with the correct Ford 9-inch housing, center section, brakes, or supporting rear-end components, our experienced team can help you put together the right combination. Email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
