DSE Replacement Coilover Springs - 12 Inch x 2.5 Inch ID - 250 lb/in - Pair (041809PDS)
Keep your coilover suspension properly matched with DSE Replacement Coilover Springs 041809PDS. This replacement spring pair combines a 12-inch free length, 2.5-inch inside diameter, and 250 pounds per inch spring rate for compatible Detroit Speed suspension applications. Whether you are replacing existing springs or setting up a suspension that specifically calls for this length and rate, 041809PDS gives you the correct Detroit Speed spring specification without relying on a generic replacement.
Detroit Speed offers replacement coilover springs in multiple lengths and rates because choosing the correct spring is an important part of getting the intended ride height, suspension travel, and performance from a coilover system. Part number 041809PDS provides a 12-inch free length and 250 pounds per inch rate in the commonly used 2.5-inch ID coilover format. These springs are sold as a pair and are intended for compatible Detroit Speed suspension applications that specifically require this spring specification.
Specifications
- Part Number: 041809PDS
- Product Type: Replacement Coilover Springs
- Spring Free Length: 12 inches
- Spring Inside Diameter: 2.5 inches
- Spring Rate: 250 pounds per inch
- Quantity: Pair
- Application: Compatible Suspension Systems Using 2.5-Inch ID Coilover Springs
- Manufacturer: Detroit Speed
Features
- Replacement coilover spring pair for compatible Detroit Speed suspension applications
- 12-inch spring free length
- 2.5-inch inside diameter
- 250 pounds per inch spring rate
- Allows worn or unsuitable springs to be replaced with the required Detroit Speed spring specification
- Useful when configuring a compatible coilover suspension that specifically requires this spring length and rate
- Available as a pair for replacing both coilover springs together
Application Notes
DSE 041809PDS is a specification-based replacement coilover spring rather than a universal vehicle-specific suspension kit. Before ordering, verify that your suspension requires a 12-inch free-length spring with a 2.5-inch inside diameter and 250 pounds per inch spring rate. Coilover spring compatibility should not be determined by inside diameter alone. Spring length and rate must also be appropriate for the vehicle, shock, suspension geometry, and intended setup.
FAQs
What are the specifications of DSE 041809PDS coilover springs?
Each spring has a 12-inch free length, 2.5-inch inside diameter, and 250 pounds per inch spring rate.
Are DSE 041809PDS coilover springs sold individually?
No. Detroit Speed lists part number 041809PDS as a pair of replacement coilover springs.
Will DSE 041809PDS work with any coilover using a 2.5-inch ID spring?
Not necessarily. The inside diameter is only one part of selecting the correct spring. Your suspension must also be appropriate for the 12-inch free length and 250 pounds per inch spring rate specified for 041809PDS. Always confirm the required spring specifications for your suspension before ordering.
Why Buy Detroit Speed from Beefcake Racing?
Beefcake Racing is your source for Detroit Speed suspension components, replacement parts, and complete performance suspension solutions. Selecting the correct coilover spring length and rate is critical to getting your suspension setup right, and our team can help you confirm the correct components for your build. Questions about DSE 041809PDS or your suspension setup? Email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
