DSE Adjustable Leaf Spring Pads (040201DS)
Dial in rear axle position and pinion angle during a custom leaf spring installation with the Detroit Speed Adjustable Leaf Spring Pads. Part number 040201DS is designed for builders installing a new rear end housing or relocating leaf springs to make room for larger rear tires. The adjustable clamp-on design lets you position the rear axle housing, establish the correct leaf spring spacing, and set pinion angle before permanently welding the pads into place.
Constructed from steel, these adjustable spring pads fit 3-inch-diameter axle tubes and are compatible with 2-1/2-inch-wide leaf springs. Their clamp-on design makes suspension mock-up considerably easier because the pads can be positioned before final welding rather than forcing you to commit to a fixed location immediately. Once axle position, spring location, and pinion angle are finalized, Detroit Speed requires the lower spring pad bases to be permanently welded to the axle tubes before driving the vehicle.
Specifications
- Part Number: 040201DS
- Product: Adjustable Leaf Spring Pads
- Product Type: Rear Suspension
- Material: Steel
- Axle Tube Diameter: 3 inches
- Compatible Leaf Spring Width: 2-1/2 inches
- Initial Mounting Style: Clamp-On for Positioning and Setup
- Final Installation: Welding Required
- Quantity: Pair
- Application: New Rear End Housing Installation or Leaf Spring Relocation
Features
- Adjustable leaf spring pad design simplifies custom rear axle and suspension setup
- Ideal when installing a new rear end housing
- Allows leaf springs to be relocated when additional rear tire clearance is needed
- Fits 3-inch-diameter axle tubes
- Compatible with 2-1/2-inch-wide leaf springs
- Clamp-on design allows the axle housing to be centered before final installation
- Allows pinion angle to be established before permanently attaching the spring pads
- Allows leaf spring positions to be set during suspension mock-up
- Steel construction provides a strong foundation for the rear leaf spring mounting points
- Sold as a pair for complete rear axle installation
Installation Notes
- Locate and center the rear axle housing before finalizing spring pad position
- Set the desired leaf spring pad width and pinion angle before permanent installation
- Clamp the spring pads securely into position during mock-up
- Detroit Speed specifies a maximum torque of 10 feet-pounds on the clamp bolts during mock-up
- The spring pads must be permanently welded to the axle tubes before driving the vehicle
- Use care during welding because excessive heat can distort the axle tubes
FAQs
What axle tube size fits DSE 040201DS Adjustable Leaf Spring Pads?
Detroit Speed 040201DS is designed specifically to clamp around 3-inch-diameter axle tubes and works with 2-1/2-inch-wide leaf springs.
Can DSE 040201DS be used when relocating leaf springs for wider rear tires?
Yes. Detroit Speed designed these pads for both new rear end housing installations and applications where the leaf springs are being relocated to provide additional clearance for larger rear tires.
Can DSE 040201DS spring pads remain clamped to the axle without welding?
No. The clamp-on design is used to establish axle position, leaf spring location, and pinion angle during mock-up. Detroit Speed requires the spring pads to be permanently welded to the axle tubes before the vehicle is driven.
Why Buy from Beefcake Racing?
Beefcake Racing is your source for Detroit Speed suspension and chassis components for street, performance, and custom builds. Whether you are installing a new rear axle housing, relocating leaf springs for additional tire clearance, or setting up a complete rear suspension package, our experienced team can help you select the right components for your build. Questions about DSE Adjustable Leaf Spring Pads part number 040201DS? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
