DSE X-Gen 595 Front Suspension Module - Powdercoated Components - Single Adjustable Shocks (032048-SDS)
Bring proven Detroit Speed suspension technology to a custom chassis with the X-Gen 595 Front Suspension Module 032048-SDS. Built around a 59.5-inch track width, this complete front suspension module gives builders a performance-engineered foundation that can be integrated into a wide range of custom applications through its 2-inch x 4-inch frame rail sections. The X-Gen system uses the same suspension technology found in Detroit Speed bolt-in front frames, combining engineered suspension geometry, responsive rack-and-pinion steering, structural rigidity, and serious road-and-track capability in one integrated package.
This 032048-SDS configuration features powdercoated components and Detroit Speed/JRi single-adjustable aluminum-body coilover shocks with Detroit Tuned valving. The single-adjustable shocks add external rebound adjustment with the simple turn of a knob, giving you the ability to fine-tune suspension response while retaining excellent street ride quality. OEM-quality stamped crossmembers, tubular upper and lower control arms, Torrington bearings, Detroit Tuned power rack-and-pinion steering, caster tuner bushings, and an integrated splined sway bar complete a front suspension system engineered for demanding custom performance builds.
Specifications
- Manufacturer: Detroit Speed
- Part Number: 032048-SDS
- Product Type: X-Gen Front Suspension Module
- Series: X-Gen 595
- Application: Universal / Custom Vehicle Integration
- Component Finish: Powdercoated
- Shock Type: Single Adjustable
- Shock Construction: Aluminum-Body Coilover
- Shock Valving: Detroit Tuned
- Shock Adjustment: Rebound
- Track Width: 59.5 inches
- Bolt Pattern: 5 x 4.5 inches
- Frame Rail Dimensions: 2 inches x 4 inches x 0.120-inch wall
- Frame Rail Length: 25.25 inches
- Outer-to-Outer Frame Width: 34.25 inches
- Distance from Rear of Frame Rail to Suspension Axis: 13.188 inches
- Nominal Ride Height: 1.9 inches
- Total Suspension Travel: 6 inches
- Maximum Wheel Backspacing: 6.125 inches
- Crossmembers: OEM-Quality Stamped Construction
- Control Arms: Tubular Upper and Lower Control Arms
- Steering: Detroit Tuned Power Rack and Pinion
- Caster/Camber Adjustment: Caster Tuner Bushings
- Sway Bar: Integrated Splined Sway Bar
- Coilover Springs Included: No
- Shipping: Freight Required
Features
- Universal X-Gen 595 front suspension module brings Detroit Speed suspension technology to custom vehicle applications
- 59.5-inch track width provides a wider suspension platform for custom chassis builds
- 5 x 4.5-inch wheel bolt pattern
- 2-inch x 4-inch x 0.120-inch wall frame rail sections are designed for custom chassis integration
- Detroit Speed exclusive suspension geometry is engineered for superior ride and handling
- Uses the same suspension technology found in Detroit Speed bolt-in front frames
- OEM-quality stamped crossmembers provide improved structural rigidity
- Tubular upper and lower control arms provide a performance-focused suspension foundation
- Detroit Speed/JRi single-adjustable aluminum-body coilover shocks feature Detroit Tuned valving
- External rebound adjustment allows suspension response to be fine-tuned with the turn of a knob
- Torrington bearings are incorporated into the suspension system
- Detroit Tuned power rack-and-pinion steering provides precise and responsive steering control
- Caster tuner bushings allow independent caster and camber adjustment
- Integrated splined sway bar helps control body roll during cornering
- Includes a spanner tool for coilover adjustment
- Provides 6 inches of total suspension travel
- Maximum wheel backspacing of 6.125 inches
- Powdercoated components provide a finished appearance and added surface protection
- Designed and engineered for high-performance street and track applications
Fitment Notes
- Universal X-Gen front suspension module with no specific year, make, or model fitment
- Designed for integration into custom vehicle applications through its 2-inch x 4-inch frame rail sections
- Part number 032048-SDS features a 59.5-inch track width
- Uses a 5 x 4.5-inch wheel bolt pattern
- Maximum wheel backspacing is 6.125 inches
- Coilover springs are not included
- Spring rates and sizes must be selected according to the specific vehicle and application
- Proper chassis fabrication and suspension installation are required for integration into the vehicle
- For competition applications, the Detroit Speed rack-and-pinion fluid transfer conversion kit can replace the rack hardlines using -4 AN steel fittings
- The fluid transfer conversion kit uses PTFE-lined hoses designed for the high-pressure demands of the steering system with pre-crimped stainless steel fittings
- X-Gen series frame must ship via freight
FAQs
What is the Detroit Speed X-Gen 595 032048-SDS designed for?
The X-Gen 595 is a universal front suspension module designed to integrate Detroit Speed suspension and steering technology into custom vehicle builds. It does not have a specific year, make, or model fitment.
What is the track width of DSE 032048-SDS?
Part number 032048-SDS features a 59.5-inch track width.
What shocks are included with DSE 032048-SDS?
Part number 032048-SDS includes Detroit Speed/JRi single-adjustable aluminum-body coilover shocks with Detroit Tuned valving. External rebound adjustment allows the shocks to be tuned with the turn of a knob while retaining excellent street ride quality.
What wheel bolt pattern does 032048-SDS use?
Part number 032048-SDS uses a 5 x 4.5-inch wheel bolt pattern.
Are coilover springs included with 032048-SDS?
No. Coilover springs are not included because the required spring rate and size vary depending on the specific vehicle and application.
Can caster and camber be adjusted independently?
Yes. Detroit Speed caster tuner bushings allow independent caster and camber adjustment, providing additional flexibility when aligning and setting up the suspension.
What steering system is included with 032048-SDS?
The X-Gen 595 incorporates Detroit Tuned power rack-and-pinion steering as part of the complete front suspension module.
Is DSE 032048-SDS a direct bolt-in suspension system?
No. The X-Gen 595 is a universal suspension module intended for custom chassis integration through its 2-inch x 4-inch frame rail sections. Proper fabrication and chassis integration are required.
What is the difference between DSE 032048-SDS and 032048DS?
Both use powdercoated components, a 59.5-inch track width, and a 5 x 4.5-inch bolt pattern. Part number 032048-SDS adds single-adjustable shocks with external rebound adjustment, while 032048DS uses non-adjustable base shocks.
Why Buy Detroit Speed from Beefcake Racing?
Beefcake Racing is your source for Detroit Speed suspension, steering, and chassis components for serious street, pro-touring, restomod, and track builds. Universal suspension systems require careful planning around track width, wheel bolt pattern, wheel backspacing, spring selection, chassis dimensions, and intended vehicle use. Our team can help you select the Detroit Speed components needed to complete your custom suspension project. Questions about DSE 032048-SDS or your build? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
