Detroit Speed Driveshaft Safety Loop Kit (2010-2015 Chevrolet Camaro V8) - 011204DS
Add an important layer of driveline protection to your fifth-generation Camaro with the Detroit Speed 011204DS Driveshaft Safety Loop Kit. Engineered for 2010-2015 Chevrolet Camaro V8 models equipped with a 6-speed automatic or manual transmission, this heavy-duty safety loop helps contain the driveshaft in the event of a driveline failure. Whether you're building a hard-launching street car, drag racing your Camaro, or simply adding extra protection to a high-horsepower combination, the 011204DS delivers a purpose-built solution without requiring permanent modifications to the car.
Detroit Speed constructs the loop from 0.25 inch thick x 2 inch wide steel to meet NHRA requirements. The loop opening measures 5 inches wide x 6.25 inches tall to the top of the arc, providing room for the factory driveshaft as well as compatible aftermarket driveshafts. In the event of a driveshaft failure, the loop is designed to help contain the shaft and reduce the potential for damage to the vehicle.
Installation is straightforward thanks to the bolt-on design. No drilling or cutting is required, and the driveshaft does not need to be removed to install the kit. Detroit Speed engineered the assembly to clear the factory exhaust system while maintaining vehicle ground clearance, giving Camaro owners added driveline protection without creating an unnecessary low point beneath the car.
The 011204DS is finished in a durable black powder coat and includes the necessary installation hardware. For fifth-generation Camaro owners looking for a clean, application-specific driveshaft safety solution that meets NHRA requirements and works with both factory and compatible aftermarket driveshafts, this Detroit Speed kit delivers protection without complicating installation.
Quick Specs
- Part Number: 011204DS
- Manufacturer: Detroit Speed
- Product Type: Driveshaft Safety Loop Kit
- Application: 2010-2015 Chevrolet Camaro V8
- Transmission Compatibility: 6-Speed Automatic or 6-Speed Manual
- Installation Type: Bolt-On
- Loop Material: Steel
- Loop Thickness: 0.25 inch
- Loop Width: 2 inches
- Loop Opening Width: 5 inches
- Loop Opening Height: 6.25 inches to Top of Arc
- Meets NHRA Requirements
- No Drilling Required
- No Cutting Required
- Driveshaft Removal Not Required for Installation
- Compatible with Factory Driveshaft
- Can Be Used with Compatible Aftermarket Driveshafts
- Clears Factory Exhaust
- Does Not Affect Vehicle Ground Clearance
- Finish: Black Powder Coat
- Necessary Installation Hardware Included
- Designed to Help Prevent Vehicle Damage in the Event of Driveshaft Failure
- Emission Code: 4
Features
- Designed specifically for 2010-2015 Chevrolet Camaro V8 models with 6-speed automatic or manual transmissions
- Heavy-duty 0.25 inch thick x 2 inch wide steel construction
- Meets NHRA driveshaft safety loop requirements
- Helps contain the driveshaft in the event of a driveline failure
- 5 inch wide x 6.25 inch tall loop opening provides ample driveshaft clearance
- Works with the factory driveshaft and compatible aftermarket driveshafts
- Direct bolt-on installation requires no drilling or cutting
- Can be installed without removing the driveshaft
- Engineered to clear the factory exhaust system
- Maintains existing vehicle ground clearance
- Black powder coat finish provides durability and a clean appearance
- Includes the necessary installation hardware
- Ideal for performance street, drag racing, and high-horsepower fifth-generation Camaro builds
Fitment
- 2010 Chevrolet Camaro V8 with 6-Speed Automatic or Manual Transmission
- 2011 Chevrolet Camaro V8 with 6-Speed Automatic or Manual Transmission
- 2012 Chevrolet Camaro V8 with 6-Speed Automatic or Manual Transmission
- 2013 Chevrolet Camaro V8 with 6-Speed Automatic or Manual Transmission
- 2014 Chevrolet Camaro V8 with 6-Speed Automatic or Manual Transmission
- 2015 Chevrolet Camaro V8 with 6-Speed Automatic or Manual Transmission
Fitment Note: Detroit Speed specifies the 011204DS Driveshaft Safety Loop Kit for V8-equipped 2010-2015 Chevrolet Camaro models with a 6-speed automatic or 6-speed manual transmission.
FAQs
Does installation of the Detroit Speed 011204DS require drilling, cutting, or driveshaft removal?
No. The 011204DS is designed as a bolt-on kit that requires no drilling or cutting, and Detroit Speed states that the driveshaft does not need to be removed during installation. The kit also clears the factory exhaust and does not reduce vehicle ground clearance.
Does the Detroit Speed 011204DS Driveshaft Safety Loop meet NHRA requirements?
Yes. Detroit Speed manufactures the loop from 0.25 inch thick x 2 inch wide steel to meet NHRA requirements. The 5 inch wide x 6.25 inch tall opening can also accommodate compatible aftermarket driveshafts.
Why Buy From Beefcake Racing?
Beefcake Racing proudly offers genuine Detroit Speed chassis, suspension, and driveline components backed by competitive pricing, fast shipping, and expert technical support. Whether you're adding safety equipment to a street-driven Camaro, preparing for the drag strip, or building a serious high-horsepower fifth-generation F-Body, our knowledgeable team can help you select the right Detroit Speed components for your combination.
Questions about fitment or installation?
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
