Corsa Closed Box Air Intake with Oiled Filter (49950) - 2015-2020 Ford F-150 5.0L V8
Upgrade the intake system on your 2015-2020 Ford F-150 5.0L V8 with the Corsa Performance Closed Box Air Intake. Designed as a vehicle-specific induction upgrade, the 49950 combines a closed air box, cross-linked polyethylene construction, and a reusable high-performance oiled air filter to provide a performance-focused replacement for the factory intake system.
The Corsa 49950 is designed to deliver improved induction performance without requiring an aftermarket ECU tune. Its closed-box configuration uses durable cross-linked polyethylene for both the air duct and air box, while the included reusable oiled filter provides 98% filtration efficiency and can be serviced rather than routinely replaced.
Corsa Closed Box Intake Design
The Corsa 49950 uses a closed air box configuration engineered specifically for the 5.0L V8 F-150. The enclosed design provides a complete vehicle-specific intake assembly rather than relying on an exposed universal filter configuration.
For F-150 owners looking to replace the factory induction components with a purpose-built performance intake, the Corsa system combines the intake duct, enclosed air box, and high-performance filtration into a complete package.
Cross-Linked Polyethylene Construction
Both the air duct and air box are manufactured from cross-linked polyethylene. This durable material provides the foundation for the complete Corsa closed-box intake system while allowing the components to be formed specifically around the available space in the F-150 engine compartment.
Reusable Oiled Air Filter
The 49950 includes Corsa's reusable oiled air filter. Unlike a disposable factory-style filter that must be replaced when it becomes dirty, the included performance filter can be cleaned, re-oiled, and returned to service.
Corsa rates the filter at 98% filtration efficiency, providing high-performance filtration for the 5.0L V8 while supporting the airflow requirements of the performance intake system.
Serviceable Performance Filtration
Corsa specifies re-oiling the included filter every 25,000 miles. A complete wash and oil service is recommended every 40,000 miles. Following the appropriate maintenance schedule allows the reusable filter to continue providing the filtration and airflow characteristics for which the intake was designed.
The included air filter carries a one-year warranty. When a replacement filter is required, Corsa specifies replacement part number 5119 for the 49950 intake.
No Tune Required
The Corsa 49950 is designed to operate without an aftermarket ECU tune. This allows F-150 owners to install the closed-box intake without making custom engine calibration a requirement for the intake system.
2015-2020 F-150 5.0L V8 Fitment
This intake is designed specifically for 2015-2020 Ford F-150 models equipped with the 5.0L V8. Corsa's emissions approval differs within that application range, so owners should pay close attention to the CARB information before ordering if the vehicle will be operated in an area where CARB compliance is required.
CARB Approval Information
Corsa lists CARB EO #D-803-9 for 2015-2017 Ford F-150 5.0L V8 applications. Beginning with the 2018 model year, EO approval requires Hydrocarbon Absorber Material, also referred to as an HC Trap. This material is not available on the 49950 intake.
As a result, the CARB EO status should not be treated as identical across the complete 2015-2020 fitment range. The listed CARB EO applies specifically to the 2015-2017 applications.
Features
- Corsa Performance Closed Box Air Intake System
- Designed for 2015-2020 Ford F-150 5.0L V8 applications
- Closed air box configuration
- Cross-linked polyethylene air duct
- Cross-linked polyethylene air box
- Includes Corsa oiled air filter
- Reusable filter design
- 98% filtration efficiency
- Re-oil filter every 25,000 miles
- Wash and oil filter every 40,000 miles
- One-year filter warranty
- Replacement filter part number 5119
- No ECU tune required
- CARB EO #D-803-9 for 2015-2017 Ford F-150 5.0L V8 applications
Fitment
- 2015 Ford F-150 5.0L V8
- 2016 Ford F-150 5.0L V8
- 2017 Ford F-150 5.0L V8
- 2018 Ford F-150 5.0L V8
- 2019 Ford F-150 5.0L V8
- 2020 Ford F-150 5.0L V8
Fitment Notes
- No tune required.
- CARB EO status varies by model year.
- 2015-2017 Ford F-150 5.0L V8 applications are covered by CARB EO #D-803-9.
- 2018 and newer EO approval requires Hydrocarbon Absorber Material (HC Trap).
- The required HC Trap is not available on this intake.
- Included oiled filter is reusable and rated at 98% filtration efficiency.
- Re-oil the filter every 25,000 miles and wash and oil every 40,000 miles.
- Replacement filter part number: 5119.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
