Corsa Carbon Fiber Air Intake with DryTech Filters (44012D) - 2023-2026 Chevrolet Corvette C8 Z06 5.5L V8
Unlock more performance from your 2023-2026 Chevrolet Corvette C8 Z06 with the Corsa Carbon Fiber Air Intake System with DryTech filters. Developed specifically for the naturally aspirated 5.5L LT6 flat-plane crank V8, the 44012D uses a true dual-path intake design with dual carbon fiber air boxes, dual carbon fiber air ducts, heat shielding, and free-flowing reusable DryTech filtration.
Corsa dyno tuned the system to optimize airflow through the Z06's high-revving LT6 engine. Compared with the factory intake, the optimized duct shape, refined air box design, and performance filtration produce gains of up to 33 horsepower at 4,950 RPM and 35 lb-ft of torque at 4,875 RPM, all without requiring an ECU tune.
Up to 33 Horsepower and 35 LB-FT of Torque
The Corsa 44012D is engineered for measurable performance, not simply engine-bay appearance. Dyno testing on the 5.5L LT6 shows gains of up to 33 horsepower at 4,950 RPM and 35 lb-ft of torque at 4,875 RPM compared with the stock intake system.
These gains come from improving the complete intake path through optimized duct geometry, refined air box design, and high-flow filtration. The result is increased airflow for the naturally aspirated LT6 without requiring aftermarket engine calibration.
True Dual-Path Air Intake
The C8 Z06 uses a high-performance naturally aspirated engine with substantial airflow demands, and Corsa addresses those requirements with a true dual-path intake configuration. Separate intake paths feed the engine through dual carbon fiber air boxes and dual carbon fiber air ducts, creating a performance-focused system developed specifically around the Z06 platform.
This dual-path architecture combines increased airflow with a symmetrical, high-end appearance that complements the exotic character of the mid-engine Corvette.
Dual Carbon Fiber Air Boxes
The 44012D includes two carbon fiber air boxes engineered to improve airflow while providing a premium engine-bay appearance. The carbon fiber construction adds a motorsport-inspired visual upgrade that is especially well suited to the high-performance character of the C8 Z06.
Corsa refines the shape of the air boxes as part of the complete intake system, helping create an optimized airflow path compared with the factory intake configuration.
Dual Carbon Fiber Air Ducts
Paired with the carbon fiber air boxes are dual carbon fiber air ducts designed to route incoming air efficiently toward the LT6. Their optimized shape contributes to the increased airflow and performance gains produced by the complete intake system.
The combination of carbon fiber air boxes and ducts gives the system a cohesive premium appearance rather than simply adding isolated carbon fiber trim pieces to the engine compartment.
Dual Reverse Cone DryTech Filters
The 44012D includes two Corsa reverse-cone DryTech air filters. These synthetic dry filters are designed to provide free-flowing filtration without requiring filter oil, making them a low-maintenance option for Z06 owners who want strong airflow and straightforward servicing.
Each filter is reusable and carries a filtration efficiency rating of 98%. Corsa specifies a wash interval of up to 50,000 miles depending on driving conditions.
Low-Maintenance Dry Filtration
DryTech filtration eliminates the need to re-oil the filters after cleaning. When service is required, the filters can be washed and reused, simplifying routine intake maintenance compared with an oiled filter system.
Corsa specifies maintenance intervals of up to 50,000 miles, although actual service frequency should be adjusted based on vehicle use and environmental conditions. Each included DryTech filter is backed by a one-year filter warranty.
Heat Shielding for Lower Intake Temperatures
Corsa incorporates air box heat shielding into the 44012D to help protect incoming air from elevated engine-bay temperatures. Maintaining lower intake air temperatures helps support consistent performance, especially in a tightly packaged mid-engine application such as the C8 Z06.
The heat shielding works together with the optimized air boxes and ducts to create a more controlled intake environment for the LT6.
Machined Aluminum MAF Mounting Plates
The system includes machined aluminum Mass Air Flow sensor mounting plates for precise placement of the factory MAF components. These purpose-built mounting points contribute to the intake's vehicle-specific fitment and clean installation.
Powder-Coated Aluminum Brackets
Corsa includes a powder-coated aluminum wiring management bracket and support bracket as part of the complete intake package. These components help properly support the intake assembly and manage surrounding wiring for a clean, organized installation.
No Tune Required
Despite the substantial airflow and performance improvements, the Corsa 44012D does not require an aftermarket ECU tune. The system is engineered to work with the factory engine management system while delivering the dyno-proven increases in horsepower and torque.
This allows Z06 owners to add a significant intake performance upgrade without making custom tuning a prerequisite for installation.
Engineered for the LT6 Flat-Plane Crank V8
The Corsa intake is developed specifically for the 5.5L naturally aspirated LT6 found in the C8 Z06. Its high-revving flat-plane crank architecture places unique demands on the intake system, making efficient airflow especially important as engine speed increases.
Corsa's optimized duct geometry, dual-path architecture, and high-flow filtration are designed to complement those airflow requirements while maintaining compatibility with the factory engine management system.
Coupe and HTC Compatibility
The Corsa 44012D fits both Coupe and HTC versions of the 2023-2026 Chevrolet Corvette C8 Z06. This provides the same carbon fiber construction, DryTech filtration, and performance benefits regardless of the Z06 body configuration.
Limited Lifetime Warranty
The complete Corsa Performance air intake system is backed by a Limited Lifetime Warranty. The included DryTech air filters carry a separate one-year filter warranty.
Features
- Designed specifically for the 2023-2026 Chevrolet Corvette C8 Z06
- Engineered for the naturally aspirated 5.5L LT6 flat-plane crank V8
- True dual-path air intake system
- Up to 33 horsepower gain at 4,950 RPM
- Up to 35 lb-ft of torque gain at 4,875 RPM
- Dyno tuned for optimal performance
- No ECU tune required
- Dual carbon fiber air boxes
- Dual carbon fiber air ducts
- Optimized duct shape and refined air box design
- Dual reverse-cone Corsa DryTech air filters
- Two included air filters
- Dry filter design requires no filter oil
- Reusable filtration
- 98% filtration efficiency
- DryTech maintenance interval up to 50,000 miles depending on driving conditions
- One-year filter warranty
- Air box heat shielding helps maintain lower intake air temperatures
- Machined aluminum Mass Air Flow sensor mounting plates
- Powder-coated aluminum wiring management bracket
- Powder-coated aluminum support bracket
- Designed to improve airflow and engine performance compared with the stock intake
- Limited Lifetime Warranty on the intake system
- CARB EO unavailable
Fitment
- 2023 Chevrolet Corvette C8 Z06 Coupe 5.5L V8
- 2024 Chevrolet Corvette C8 Z06 Coupe 5.5L V8
- 2025 Chevrolet Corvette C8 Z06 Coupe 5.5L V8
- 2026 Chevrolet Corvette C8 Z06 Coupe 5.5L V8
- 2023 Chevrolet Corvette C8 Z06 HTC 5.5L V8
- 2024 Chevrolet Corvette C8 Z06 HTC 5.5L V8
- 2025 Chevrolet Corvette C8 Z06 HTC 5.5L V8
- 2026 Chevrolet Corvette C8 Z06 HTC 5.5L V8
Fitment Notes
- Designed specifically for C8 Z06 models equipped with the 5.5L LT6 V8.
- Fits both Coupe and HTC applications.
- No tune required.
- Includes two reusable DryTech air filters.
- CARB Executive Order is unavailable.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
