Corsa 3.0" Cat-Back Exhaust with 4.5" Black Pro-Series Tips (21102BLK) - 2020-2026 Chevrolet Corvette C8 Without NPP
Give your 2020-2026 Chevrolet Corvette C8 a dramatically more aggressive exhaust note with the Corsa 3.0" Cat-Back Exhaust System. Designed specifically for AFM-equipped C8 Corvette models without factory NPP, the 21102BLK is engineered to eliminate exhaust restrictions, maximize weight savings, and bring substantially more sound to the mid-engine 6.2L V8.
This black-tip configuration delivers an ultra-aggressive exhaust character that measures 13 decibels louder than stock while removing an impressive 25 lbs compared with the factory exhaust components. A complete 3.0" Cat-Back configuration and quad 4.5" black Pro-Series tips combine the performance-focused design with a darker, aggressive appearance at the rear of the C8.
Ultra-Aggressive C8 Exhaust Sound
The Corsa 21102BLK is intended for Corvette owners seeking an ultra-aggressive exhaust note from the C8's 6.2L V8. Rather than simply changing the appearance of the factory exhaust, this Cat-Back system is designed to bring substantially more sound to the driving experience.
Corsa rates the system at 13 decibels louder than stock, creating a major increase in exhaust presence for drivers who want the C8's naturally aspirated V8 to become a much more prominent part of the car's character.
Designed for AFM-Only C8 Applications
The Corsa 21102BLK is an AFM-only C8 Cat-Back exhaust system designed specifically for Corvette applications without the factory NPP exhaust system. Corsa engineered its AFM-only exhaust systems to eliminate restrictions, maximize weight savings, and deliver an aggressive exhaust note while addressing resonance associated with the C8's 4-cylinder economy mode operation.
Correct factory exhaust configuration is critical when selecting this system. Part number 21102BLK is not intended for 2021 and newer C8 Corvettes originally equipped with NPP from the factory. Installing it on an affected factory-NPP vehicle can cause a check engine light.
3.0" Cat-Back Exhaust Design
The Corsa 21102BLK uses a complete 3.0" Cat-Back configuration engineered for the mid-engine C8 Corvette. The system is designed to reduce restrictions within the exhaust while providing the aggressive sound and substantial weight reduction that performance-focused Corvette owners are looking for.
Its dual rear exit configuration terminates in four large exhaust outlets, giving the C8 an aggressive quad-tip appearance to complement the performance-oriented Cat-Back design.
25 LB Weight Savings
Reducing unnecessary weight is especially valuable on a performance car, and the Corsa 21102BLK delivers a significant 25 lb weight savings compared with the factory exhaust components it replaces.
This substantial reduction complements the system's reduced-restriction design and increased exhaust volume, providing a functional performance-oriented benefit in addition to the dramatic change in sound and appearance.
13 dB Louder Than Stock
Corsa rates the 21102BLK at 13 decibels louder than the factory C8 exhaust. This substantial increase makes the system an excellent choice for drivers specifically seeking a much more aggressive exhaust experience rather than a mild change from stock.
The combination of the 3.0" Cat-Back configuration and aggressive acoustic character lets more of the 6.2L V8's personality come through during acceleration and performance driving.
Quad 4.5" Black Pro-Series Tips
The Corsa 21102BLK finishes the C8's dual rear exhaust with twin 4.5" black Pro-Series tips at each side, creating four total exhaust outlets. The large-diameter tips provide an aggressive appearance that complements the wide rear styling of the mid-engine Corvette.
Each Pro-Series tip features dual-wall construction with a slash-cut design. The black finish provides a darker alternative to the polished 21102 configuration while the quad-tip layout emphasizes the performance-focused character of the Corsa Cat-Back.
Important No Drone RSC Technology Notice
The Corsa 21102BLK does not contain Corsa Performance No Drone RSC Technology. This distinction is important because many Corsa exhaust systems are associated with RSC Technology, but this specific AFM-only C8 system does not use it.
The 21102BLK should therefore be selected specifically for its ultra-aggressive exhaust character, AFM-only configuration, reduced restriction, 25 lb weight savings, and black Pro-Series styling rather than on the assumption that it contains Corsa's RSC Technology.
Professional Installation Recommended
Corsa recommends that installation of the C8 exhaust system be performed by a professional. Proper installation is particularly important because of the C8's factory valve system and the potential need for valve recalibration following installation.
GM Valve Relearn May Be Required
Due to variations in GM factory tolerances, some C8 exhaust installations may require the GM valve relearn sequence to mitigate a check engine light. When required, the valves should be recalibrated according to GM Document ID 5406413.
Refer to the Corsa installation instructions for additional details regarding installation and the valve relearn procedure.
Features
- Designed for 2020-2026 Chevrolet Corvette C8 6.2L V8 applications without factory NPP
- AFM-only C8 Cat-Back exhaust configuration
- Ultra-aggressive exhaust sound
- 13 decibels louder than stock
- Designed to eliminate exhaust restrictions
- Designed to maximize weight savings
- 25 lb weight savings compared with the factory exhaust components
- Designed to address resonance associated with 4-cylinder economy mode operation
- 3.0" Cat-Back exhaust system
- Dual rear exit configuration
- Quad-tip exhaust layout
- Twin exhaust tips at each rear exit
- Four total exhaust outlets
- 4.5" Corsa Pro-Series exhaust tips
- Black exhaust tip finish
- Dual-wall tip construction
- Slash-cut tip design
- Does NOT contain Corsa Performance No Drone RSC Technology
- Professional installation recommended by Corsa
- Some vehicles may require a GM valve relearn sequence after installation
Fitment
- 2020 Chevrolet Corvette C8 6.2L V8 Coupe without Factory NPP
- 2020 Chevrolet Corvette C8 6.2L V8 Convertible/HTC without Factory NPP
- 2021 Chevrolet Corvette C8 6.2L V8 Coupe without Factory NPP
- 2021 Chevrolet Corvette C8 6.2L V8 Convertible/HTC without Factory NPP
- 2022 Chevrolet Corvette C8 6.2L V8 Coupe without Factory NPP
- 2022 Chevrolet Corvette C8 6.2L V8 Convertible/HTC without Factory NPP
- 2023 Chevrolet Corvette C8 6.2L V8 Coupe without Factory NPP
- 2023 Chevrolet Corvette C8 6.2L V8 Convertible/HTC without Factory NPP
- 2024 Chevrolet Corvette C8 6.2L V8 Coupe without Factory NPP
- 2024 Chevrolet Corvette C8 6.2L V8 Convertible/HTC without Factory NPP
- 2025 Chevrolet Corvette C8 6.2L V8 Coupe without Factory NPP
- 2025 Chevrolet Corvette C8 6.2L V8 Convertible/HTC without Factory NPP
- 2026 Chevrolet Corvette C8 6.2L V8 Coupe without Factory NPP
- 2026 Chevrolet Corvette C8 6.2L V8 Convertible/HTC without Factory NPP
Fitment Notes
- Designed for AFM-only C8 Corvette applications without factory NPP.
- Part number 21102BLK is NOT for use on 2021 and newer vehicles equipped with NPP from the factory. Installation on an affected factory-NPP vehicle will cause a check engine light.
- Corsa recommends professional installation.
- Due to GM factory tolerances, some C8 exhaust systems may require the GM valve relearn sequence to mitigate a check engine light.
- When required, valves should be recalibrated according to GM Document ID 5406413.
- Refer to the Corsa installation instructions for additional valve relearn information.
- This system does NOT contain Corsa Performance No Drone RSC Technology.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
