null

BCR Budget E85 Fuel System 900hp (11-17 Mustang)

Image is a representation of this item.
Actual item may vary.

Item#:
budget-e85-fuel-system
Regular price: $1,795.00
Sale price: $1,408.00
(No reviews yet) Write a Review
Beefcake Racing's Budget E58 Fuel System, starts with a Fore Innovations S197C Level 1 Dual Pump Fuel Hat for Ford 2011-2017 Mustang GT.

It's the perfect system for those that don't want to risk their engine with replacement pumps or low budget systems that don't add a complete hat and lines.

We then add your choice of E85 rated Walbro 465 pumps, either regular (85psi rated) or high pressure (125psi rated), along with your choice of lines, and e85 rated fuel filter.

The Beefcake Level 1 fuel system is a great system for street or strip action and is 900 rwhp capable on e85. This system utilizes the factory fuel rails. The upgraded feed fuel is regulated before entering the factory fuel rails. Proper upgraded feed line and filtration included. Perfect system for applications where factory fuel rails must be used.

 

Level 1 Dual Pump Features

Up to 900RWHP

Uses OE Fuel Rails

Return Style

E85/Race Fuel Compatible

 

Application

Ford 2011+ Mustang GT with OE, Boss 302, or FRPP intake, Whipple, Kenne Bell, Vortech, Procharger superchargers or any turbo system.

 

 

Level 1 Kit Includes

S197-C Fuel Pump Module - Dual Pump

F1i Fuel Pressure Regulator

88mm Inline Fuel Filter

FCV Checkvalve

 

All fittings, hose, and hardware to complete typical fuel line plumping:

- 25ft of your choice fuel line

- 8 compression style billet hose ends

- 4 low profile 90 degree billet o-ring fittings

- 8 hose straps with stainless mounting screws

- 3/8 EFI (female) to AN-8 (male) adapter.

 

Electrical Upgrade

None: base module configuration, 6" [150mm] of pump power wire protrude from top of hermetic seal

 

FC2 Controller with 6 gauge wiring:

- Operates both pumps simultaneously, using factory control

- Best for controlling two small fuel pumps for street duty, or two large fuel pumps for track use only (due to fuel heat)

- May be used for control of secondary pumps with triple module IF [a small] primary pump can be run by OEM harness

- Includes 14' [4.2m] of 6 AWG power wire and 100 amp fuse

- Includes 3' [.9m] of 6 AWG ground wire with ring terminal

- Includes 7' [2.1m] 12 AWG pump leads and sealed Delphi connector at pump module

 

FC3 Staged Controller with 4 gauge wiring:

- Operates secondary pump(s) independently from primary pump using factory control in conjunction with a secondary trigger source.

- Best for controlling two or three large fuel pumps for street duty and minimizing heat

- Includes 14' [4.2m] of 4 AWG power wire and 100 amp fuse

- Includes 3' [.9m] of 4 AWG ground wire with ring terminal

- Includes 7' [2.1m] 12 AWG pump leads and sealed Delphi connector at pump module

 

Sealed Delphi Connector and 7' 12 AWG pigtail only

- Includes 7' [2.1m] 12 AWG pump leads and sealed Delphi connector at pump module

- Installer is responsible for properly implementing fuses and relays

 

 

Filtration Media

CELLULOSE FILTER ELEMENT

- cellulose element, bonded aluminum endcaps, Viton o-ring

- provides 10 micron nominal, 14 micron absolute filtration

- use with gasoline and race gas

- disposable

- recommended filtration for use with Injector Dynamics fuel injectors

 

MICROGLASS SSD (ANTI-STATIC) FILTER ELEMENT

- microglass element, static dissipating, bonded aluminum endcaps, Viton o-ring

- provides 12 micron absolute filtration

- use with all fuel types and blends (i.e. gasoline, race gas, E85, E100, M5, diesel)

- disposable

- recommended filtration for use with Injector Dynamics fuel injectors

 

STAINLESS FILTER ELEMENT

- stainless element, stainless endcaps, Viton o-ring

- provides 10 micron nominal, 26 micron absolute filtration

- use with all fuel types and blends (i.e. gasoline, race gas, E85, E100, M5, diesel)

-re-usable

 

Fuel Filter Upgrades

Upgrade to 128mm Filter

- Upgrade from standard 88mm filter to 128mm filter length for more filtration capacity and more time between service intervals.

 

Billet Mounting Bracket

- Use it to mount filter under car body, show quality installation to secure mounting of filter assembly for ease of maintenance

 

Filter Monitoring Gauge and Fitting

- Use to monitor fuel pressure before filter to inspect filter health. A higher pressure before filter indicates loss across the filter. If ignored, substantial filter obstruction will lead to reduced pump performance, shortened pump life, and higher fuel heat. Fitting is includes to allow precise orientation of pressure gauge.

 

System Options

Honeywell Pressure Switch for FC3

- 1/8 NPT Male threads, installs in intake manifold, must see boost and vacuum

 

Boost Vacuum Manifold Kit

- Our Boost / Vacuum manifold kit includes the following: Fore Innovations Boost / Vacuum Manifold (3 x 1/4" barb fittings, 4 x plugs)

 

 

 

Shop all Fore Innovations Fuel Systems at Beefcake Racing, Authorized Dealer, Call 1-855-827-7223 9am-10pm EST for guaranteed lowest price.

 

CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov