Borla S-Type Single-to-Dual Conversion Cat-Back Exhaust System with Polished Tips (140852) - 2019-2024 Ram 1500 3.6L V6 (New Body Style)
Wake up the high-performance spirit of your truck with the high-impact Borla S-Type Cat-Back Exhaust System. Custom-engineered for 2019 to 2024 Ram 1500 trucks equipped with the 3.6L Pentastar V6 engine and a factory single exhaust, this premium dual-exit upgrade introduces Borla's legendary acoustic profile: the classic S-Type sound level. Formulated explicitly for driving enthusiasts and performance purists who crave an assertive, sport-tuned exhaust note under acceleration, this system is calibrated to give the 3.6L V6 engine a crisp, athletic growl. This configuration delivers a commanding exterior acoustic presence while relying on advanced straight-through internals backed by Borla's official No-Drone Guarantee to keep the cabin completely comfortable and drone-free during highway cruising, daily commuting, or weekend projects.
The internal engineering of the Borla 140852 targets key factory flow restrictions by incorporating an upgraded high-efficiency single-to-dual performance layout. The design features a high-flow 3-inch primary pipeline entering the specially engineered muffler, which then transitions into dual 2.25-inch mandrel-bent tailpipes. This specialized architecture utilizes ultra-smooth mandrel bends and patented multi-core internal geometry to maximize exhaust velocity and optimize scavenging, unlocking hidden horsepower, sharper throttle response, and enhanced fuel economy across the entire powerband. Built completely from premium-grade, aircraft-quality T-304 austenitic stainless steel, this highly durable cat-back assembly defends permanently against structural degradation, intense under-car heat cycling, and severe weather. The spent exhaust gases exit through a symmetric split rear layout that places one pipe under each side of the bumper, finished with dual 4-inch round, rolled edge angle-cut bright chrome mirror-polished T-304 stainless steel tips. Precision CNC-manufactured for an accurate line-to-line bolt-on fitment, this system utilizes existing factory mounting positions and is backed by Borla’s legendary lifetime Million-Mile Warranty.
Factory Single-to-Dual Conversion Notes: This performance system is meticulously engineered to convert half-ton Ram models equipped with a standard factory single-side exhaust outlet into an aggressive, symmetric dual rear-exit setup. The dual tailpipes are designed to route precisely under the rear bumper valence. For owners who wish to fine-tune their setup, Borla’s optional resonator (part number 60716) can be added separately to dampen and further refine the volume level.
Features
- Single-to-Dual Performance Conversion: Converted layout features a 3-inch inlet splitting into dual 2.25-inch mandrel-bent tailpipes to upgrade factory single setups
- Classic S-Type Acoustic Profile: Formulated to deliver a balanced, sporty V6 growl under load with a highly controlled, drone-free cabin experience
- Patented Multi-Core Tech: High-efficiency straight-through internal geometry completely removes restrictive factory baffled layout designs
- Borla No-Drone Guarantee: Advanced acoustic engineering ensures an upgraded exterior note with absolute zero cab resonance or highway humming
- Constructed completely from premium-grade T-304 austenitic stainless steel for permanent structural integrity and ultimate rust resistance over low-grade 400-series options
- Polished Split Rear Styling: Finished with dual 4-inch round, rolled edge angle-cut bright chrome mirror-polished T-304 stainless steel tips exiting cleanly under the bumper
- True Bolt-On Architecture: Precision computer-numerical control (CNC) manufacturing ensures an accurate, line-to-line fitment along factory hanger routes
- Proudly manufactured in the USA and backed by Borla's unmatched written Million-Mile Warranty
Detailed Vehicle Fitment Breakdown
Compatible Model Years & Fitment Boundaries:
This performance single-to-dual conversion exhaust system is compatible with the following truck configurations under the specific chassis, transmission, engine, and trim parameters detailed below:
Ram 1500 (New Body Style) Fitment:
- 2019 Ram 1500 (3.6L V6 - Models with Factory Single Exhaust)
- 2020 Ram 1500 (3.6L V6 - Models with Factory Single Exhaust)
- 2021 Ram 1500 (3.6L V6 - Models with Factory Single Exhaust)
- 2022 Ram 1500 (3.6L V6 - Models with Factory Single Exhaust)
- 2023 Ram 1500 (3.6L V6 - Models with Factory Single Exhaust)
- 2024 Ram 1500 (3.6L V6 - Models with Factory Single Exhaust)
Engine, Drivetrain & Configuration Details:
Fits the platforms listed above across these exact structural layouts:
- Engine Configuration: 3.6L Pentastar V6 Gas Engine Only (Does NOT fit 5.7L Hemi V8 or 3.0L EcoDiesel models)
- Factory Exhaust Setup: Fits vehicles originally equipped with a single side-exit exhaust system from the factory
- Transmission Compatibility: Compatible with factory automatic transmissions
- Drivetrain Layout: Fits both 2-Wheel Drive (2WD) and 4-Wheel Drive (4WD) vehicle platforms
- Supported Wheelbases & Configurations: Quad Cab (Extended Cab) with Standard Bed (6' 4") on a 140.5" WB, Crew Cab with Short Bed (5' 7") on a 144.6" WB, and Crew Cab with Standard Bed (6' 4") on a 153.5" WB
- Trim Package Coverage: Includes Rebel models originally equipped with a factory single exhaust
- Critical Model Exclusions: This system does NOT fit older legacy body styles (Ram 1500 Classic models)
Important Application Notes:
- **Premium Materials:** Built entirely with authentic T-304 stainless steel to deliver superior rust resistance and durability over lower-grade T-400 series choices (such as 409 stainless steel).
- **Direct Fit Integrity:** Engineered as a direct bolt-on kit that uses existing factory hangers, requiring no welding or custom fabrication for a standard installation.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
