Borla S-Type Cat-Back Exhaust System with Single Black Chrome Tip (140843BC) - 2020-2026 Ford F-250 / F-350 Super Duty 7.3L V8 & 2023-2026 6.8L V8
Wake up the high-performance spirit of your truck with the high-impact Borla S-Type Cat-Back Exhaust System. Custom-engineered for 2020 to 2026 Ford F-250 and F-350 Super Duty trucks (including Tremor models) equipped with the 7.3L Godzilla V8 engine, as well as 2023 to 2026 models with the 6.8L V8 engine, this premium exhaust upgrade introduces Borla's legendary acoustic profile: the classic S-Type sound level. Formulated explicitly for driving enthusiasts and performance purists who crave a balanced, sport-tuned exhaust note under acceleration, this system is calibrated to give the heavy-duty Ford V8 engines a crisp, athletic growl. This configuration delivers a commanding exterior acoustic presence while relying on advanced straight-through internals backed by Borla's official No-Drone Guarantee to keep the cabin completely comfortable and drone-free during highway cruising, heavy towing, or daily commuting.
The internal engineering of the Borla 140843BC targets key factory flow restrictions by incorporating an upgraded high-efficiency performance layout featuring a dual 2.75-inch inlet configuration that transitions cleanly into a high-flow single 3.5-inch mandrel-bent tailpipe. This specialized architecture utilizes ultra-smooth mandrel bends and patented multi-core internal geometry to maximize exhaust velocity and optimize scavenging, unlocking hidden horsepower, sharper throttle response, and enhanced fuel economy across the entire powerband. Built completely from premium-grade, aircraft-quality T-304 austenitic stainless steel, this highly durable cat-back assembly defends permanently against structural degradation, intense under-car heat cycling, and severe heavy-duty working conditions. The spent exhaust gases exit through a clean single side exit layout finished with a massive 5-inch round black chrome premium T-304 stainless steel tip. Precision CNC-manufactured for an accurate line-to-line bolt-on fitment, this system utilizes existing factory mounting positions and is backed by Borla’s legendary lifetime Million-Mile Warranty.
Black Chrome Tip Care & Maintenance: The premium 5-inch black chrome finish on this system requires specific maintenance to safeguard its deep, mirror-like luster. Using abrasive metal cleaner or standard stainless steel polishes (such as Borla 21499) is NOT recommended with these specialized black chrome tips. To avoid damaging the finish, simply clean the tips using hot water and a soft microfiber cloth.
Modular Wheelbase Fitment Instructions: Out of the box, this kit includes the necessary front extension pipe to fit a Crew Cab with a Short Bed (6-foot 9-inch bed) on a 160-inch wheelbase. To install this system on a Regular Cab with a Long Bed (8-foot bed) on a 142-inch wheelbase, simply remove the included front extension pipe during assembly. This system can also be adapted to fit alternate wheelbases using the following separate Borla adapters: part number 60691 for SuperCab / Short Bed (148" WB), part number 60692 for SuperCab / Long Bed (164" WB), or part number 60693 for Crew Cab / Long Bed (176" WB).
Features
- High-Flow Performance Pipeline: Dual 2.75-inch tubing splitting into a single 3.5-inch mandrel-bent tailpipe to eliminate restriction and maximize gas velocity
- Classic S-Type Acoustic Profile: Formulated to deliver a balanced, sporty heavy-duty V8 growl under load with a highly controlled, drone-free cabin experience
- Patented Multi-Core Tech: High-efficiency straight-through internal geometry completely removes restrictive factory baffled layout designs
- Borla No-Drone Guarantee: Advanced acoustic engineering ensures an upgraded exterior note with absolute zero cab resonance or highway humming
- Constructed completely from premium-grade T-304 austenitic stainless steel for permanent structural integrity and ultimate rust resistance over low-grade 400-series options
- Premium Stealth Styling: Finished with a bold, single 5-inch round black chrome premium T-304 stainless steel tip in a clean side exit location
- True Bolt-On Architecture: Precision computer-numerical control (CNC) manufacturing ensures an accurate, line-to-line fitment along factory hanger routes
- Backed by Borla's unmatched written Million-Mile Warranty (black coating and tip finishes carry a specialized one-year warranty coverage)
Detailed Vehicle Fitment Breakdown
Compatible Model Years & Fitment Boundaries:
This performance heavy-duty side exit exhaust system is compatible with the following truck configurations under the specific chassis, transmission, engine, and trim parameters detailed below:
Ford F-250 Super Duty Fitment:
- 2020 Ford F-250 Super Duty (7.3L V8 - Including Tremor Models)
- 2021 Ford F-250 Super Duty (7.3L V8 - Including Tremor Models)
- 2022 Ford F-250 Super Duty (7.3L V8 - Including Tremor Models)
- 2023 Ford F-250 Super Duty (6.8L & 7.3L V8 - Including Tremor Models)
- 2024 Ford F-250 Super Duty (6.8L & 7.3L V8 - Including Tremor Models)
- 2025 Ford F-250 Super Duty (6.8L & 7.3L V8 - Including Tremor Models)
- 2026 Ford F-250 Super Duty (6.8L & 7.3L V8 - Including Tremor Models)
Ford F-350 Super Duty Fitment:
- 2020 Ford F-350 Super Duty (7.3L V8 - Including Tremor Models)
- 2021 Ford F-350 Super Duty (7.3L V8 - Including Tremor Models)
- 2022 Ford F-350 Super Duty (7.3L V8 - Including Tremor Models)
- 2023 Ford F-350 Super Duty (6.8L & 7.3L V8 - Including Tremor Models)
- 2024 Ford F-350 Super Duty (6.8L & 7.3L V8 - Including Tremor Models)
- 2025 Ford F-350 Super Duty (6.8L & 7.3L V8 - Including Tremor Models)
- 2026 Ford F-350 Super Duty (6.8L & 7.3L V8 - Including Tremor Models)
Engine, Drivetrain & Configuration Details:
Fits the platforms listed above across these exact structural layouts:
- Engine Configuration: 7.3L Godzilla V8 and 2023-2026 6.8L V8 Gas Engines Only (Does NOT fit 6.2L V8 or 6.7L Power Stroke Diesel models)
- Transmission Compatibility: Compatible with factory heavy-duty automatic transmissions
- Drivetrain Layout: Fits both 2-Wheel Drive (2WD) and 4-Wheel Drive (4WD) vehicle platforms
- Direct Fit Wheelbases (Included in Kit): Crew Cab / Short Bed (6' 9") on a 160" WB or Regular Cab / Long Bed (8') on a 142" WB (Requires removing extension pipe)
- Adaptable Wheelbases (Requires Optional Borla Extensions): SuperCab / Short Bed (148" WB requires 60691), SuperCab / Long Bed (164" WB requires 60692), Crew Cab / Long Bed (176" WB requires 60693)
- Critical Model Exclusions: This system does NOT fit vehicles equipped with Dual Rear Wheels (DRW / Dually configurations)
Important Application Notes:
- **Premium Materials:** Built entirely with authentic T-304 stainless steel to deliver superior rust resistance and durability over lower-grade T-400 series choices (such as 409 stainless steel).
- **Direct Fit Integrity:** Engineered as a direct bolt-on kit that uses existing factory hangers, requiring no welding or custom fabrication for a standard installation.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
