Borla S-Type Cat-Back Exhaust System with Polished Tips (1400048) - 2003-2010 Dodge Viper SRT-10 8.3L / 8.4L V10
Wake up the high-performance spirit of your sports car with the high-impact Borla S-Type Cat-Back Exhaust System. Custom-engineered exclusively for 2003 to 2010 Dodge Viper SRT-10 models, this premium full-length exhaust upgrade introduces Borla's legendary acoustic profile: the classic S-Type sound level. Formulated explicitly for supercar purists and track day enthusiasts who crave an aggressive, throatier exhaust note under acceleration without being overbearing, this system is calibrated to give the massive 8.3L and 8.4L V10 engines a deep, resonant growl. This cat-back configuration provides an optimized, race-inspired exterior presence while relying on advanced straight-through internals backed by Borla's official No-Drone Guarantee to keep the cabin completely comfortable and drone-free during highway cruising, spirited driving, or track sessions.
The internal engineering of the Borla 140048 targets key factory flow restrictions by incorporating an upgraded high-efficiency performance layout featuring a 2.5-inch main pipe diameter. This system utilizes ultra-smooth mandrel bends to optimize exhaust velocity, maximize gas flow, and unlock hidden horsepower, throttle response, and torque across the entire powerband. Built completely from premium-grade, aircraft-quality T-304 austenitic stainless steel, this highly durable cat-back assembly defends permanently against structural degradation, intense track-day heat cycling, and severe corrosion. The spent exhaust gases exit through the Viper's signature split side configuration, featuring a single 3.63-inch round, rolled angle-cut mirror-polished T-304 stainless steel tip exiting on each side of the vehicle. Precision CNC-manufactured for an accurate line-to-line bolt-on fitment, this system utilizes all factory mounting positions and is backed by Borla's legendary lifetime Million-Mile Warranty.
Chassis & Configuration Notes: This cat-back system is engineered specifically for the 2003-2010 Dodge Viper SRT-10 generation (covering both Generation 3 and Generation 4 platforms). It is fully compatible with factory 6-speed Manual transmissions and fits 2-Door Coupe and Convertible Rear-Wheel Drive (RWD) models powered by either the 8.3L or 8.4L V10 engine. It is not designed to fit alternative model years or custom chassis variations without modification.
Features
- Aggressive S-Type Acoustic Profile: Delivers a deep, throaty, and distinct V10 growl under load with a highly controlled cabin presence
- High-Flow Architecture: Smooth 2.5" mandrel-bent performance piping engineered specifically to minimize restriction and maximize flow efficiency
- Borla No-Drone Guarantee: Advanced straight-through and multi-core acoustics ensure an upgraded exterior note with absolute zero cab resonance
- Constructed completely from premium-grade T-304 austenitic stainless steel for permanent structural integrity and ultimate rust resistance
- Classic Polished Styling: Features eye-catching single 3.63-inch round, rolled angle-cut mirror-polished T-304 stainless steel tips
- Iconic Split Side Exit: Tailpipes route cleanly to the factory rocker panel locations for a true, authentic Viper appearance
- True Bolt-On Architecture: Precision computer-numerical control (CNC) manufacturing ensures an accurate, line-to-line fitment
- Backed by Borla's unmatched, industry-leading written Million-Mile Warranty
Detailed Vehicle Fitment Breakdown
Compatible Model Years:
This system fits the following individual model years under the specific chassis, body, engine, and drivetrain constraints listed below: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Dodge Viper SRT-10 (Gen 3 & Gen 4 Platforms Only).
Dodge Viper SRT-10 Fitment Breakdown (8.3L / 8.4L V10 RWD):
Fits 2-Door Coupe and Convertible models with Manual Transmissions:
- 2003 Dodge Viper SRT-10: 8.3L / 8.4L V10 RWD (Coupe / Convertible - *Split Side Exit*)
- 2004 Dodge Viper SRT-10: 8.3L / 8.4L V10 RWD (Coupe / Convertible - *Split Side Exit*)
- 2005 Dodge Viper SRT-10: 8.3L / 8.4L V10 RWD (Coupe / Convertible - *Split Side Exit*)
- 2006 Dodge Viper SRT-10: 8.3L / 8.4L V10 RWD (Coupe / Convertible - *Split Side Exit*)
- 2007 Dodge Viper SRT-10: 8.3L / 8.4L V10 RWD (Coupe / Convertible - *Split Side Exit*)
- 2008 Dodge Viper SRT-10: 8.3L / 8.4L V10 RWD (Coupe / Convertible - *Split Side Exit*)
- 2009 Dodge Viper SRT-10: 8.3L / 8.4L V10 RWD (Coupe / Convertible - *Split Side Exit*)
- 2010 Dodge Viper SRT-10: 8.3L / 8.4L V10 RWD (Coupe / Convertible - *Split Side Exit*)
Important Application & Compatibility Notes:
- **Transmission Specific:** Engineered exclusively for models equipped with the factory manual transmission layout.
- **Engine Compatibility:** Tailored to accommodate both the 8.3L V10 (2003-2006) and the updated 8.4L V10 (2008-2010) engine bay configurations.
- **Premium Materials:** Built entirely with authentic T-304 stainless steel to deliver superior rust resistance over lower-grade T-400 series choices.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
