Borla Touring 2.5-Inch Axle-Back Exhaust System with Polished Square Tips (11834) - 2012-2018 Jeep Wrangler JK & JKU 3.6L V6
Wake up the adventure-ready spirit of your rig with the high-impact Borla Touring Axle-Back Exhaust System. Custom-engineered for 2012 to 2018 Jeep Wrangler JK (2-Door) and JKU (4-Door) models powered by the versatile 3.6L Pentastar V6 engine, this premium upgrade introduces Borla's most refined acoustic profile: Touring. Formulated explicitly for driving enthusiasts who crave a clean, smooth, and mellow exhaust note over a loud roar, the Touring multi-core mufflers are calibrated to give your V6 a deep, premium tone under acceleration without being aggressive. This creates a sporty exhaust signature while utilizing advanced straight-through internal design to eliminate irritating low-frequency interior cabin drone during highway commuting or long trail rides.
The internal engineering of the Borla 11834 targets key rear restrictions by replacing the bulky factory muffler with a high-flow, mandrel-bent infrastructure featuring a 2.5-inch inlet diameter feeding into the muffler and splitting into dual 2-inch tailpipes out. Built completely from premium-grade, aircraft-quality T-304 austenitic stainless steel, this durable axle-back system smoothly accelerates gas velocity, optimizes exhaust flow, and defends permanently against harsh off-road mud, rust, or corrosion. The exhaust gases exit through an aggressive dual split rear layout featuring two unique 3.5-inch x 3.28-inch "square" rolled angle-cut lined bright chrome on T-304 stainless steel tips (one on each side) that add a distinct, rugged custom appearance to your rear bumper line. Precision CNC-manufactured for an accurate line-to-line bolt-on fit, this system is backed by Borla’s legendary lifetime Million-Mile Warranty.
Chassis & Configuration Notes: This axle-back system fits both standard 2-door (JK) and 4-door (JKU) Wrangler models equipped with 4-wheel drive and the 3.6L V6 engine. It installs as a straightforward, direct replacement for the original equipment rear muffler assembly, securing neatly to your factory mid-pipe connection while using your original hanger locations.
Features
- Mellow Touring Acoustic Profile: Delivers Borla’s smooth, clean, and deep exhaust note with a sophisticated, trail-friendly sound volume
- Optimized Gas Pathways: High-flow 2.5" muffler inlet splits into smooth dual 2" tailpipes to minimize rear backpressure
- Advanced multi-core straight-through technology ensures an upgraded tone with absolute zero interior cabin drone
- Constructed completely from premium-grade T-304 austenitic stainless steel for permanent structural integrity
- Unique Truck Styling: Finished with two standout 3.5" x 3.28" "square" rolled angle-cut bright chrome stainless steel tips
- True Bolt-On Architecture: Precision computer-numerical control (CNC) manufacturing ensures an accurate, line-to-line fitment
- Backed by Borla's unmatched, industry-leading written Million-Mile Warranty
Detailed Vehicle Fitment Breakdown
Compatible Model Years:
This system fits the following individual model years under the specific chassis, engine, and drivetrain constraints listed below: 2012, 2013, 2014, 2015, 2016, 2017, 2018 Jeep Wrangler JK / JKU.
Jeep Wrangler JK 2-Door Fitment Breakdown (3.6L V6 4WD):
Fits 2-door models with Automatic or Manual Transmissions:
- 2012 Jeep Wrangler JK: 2-Door 3.6L V6 4WD (Dual Split Rear Exit)
- 2013 Jeep Wrangler JK: 2-Door 3.6L V6 4WD (Dual Split Rear Exit)
- 2014 Jeep Wrangler JK: 2-Door 3.6L V6 4WD (Dual Split Rear Exit)
- 2015 Jeep Wrangler JK: 2-Door 3.6L V6 4WD (Dual Split Rear Exit)
- 2016 Jeep Wrangler JK: 2-Door 3.6L V6 4WD (Dual Split Rear Exit)
- 2017 Jeep Wrangler JK: 2-Door 3.6L V6 4WD (Dual Split Rear Exit)
- 2018 Jeep Wrangler JK: 2-Door 3.6L V6 4WD (Dual Split Rear Exit - *JK Generation Only*)
Jeep Wrangler JKU 4-Door Fitment Breakdown (3.6L V6 4WD):
Fits 4-door Unlimited models with Automatic or Manual Transmissions:
- 2012 Jeep Wrangler JKU: 4-Door Unlimited 3.6L V6 4WD (Dual Split Rear Exit)
- 2013 Jeep Wrangler JKU: 4-Door Unlimited 3.6L V6 4WD (Dual Split Rear Exit)
- 2014 Jeep Wrangler JKU: 4-Door Unlimited 3.6L V6 4WD (Dual Split Rear Exit)
- 2015 Jeep Wrangler JKU: 4-Door Unlimited 3.6L V6 4WD (Dual Split Rear Exit)
- 2016 Jeep Wrangler JKU: 4-Door Unlimited 3.6L V6 4WD (Dual Split Rear Exit)
- 2017 Jeep Wrangler JKU: 4-Door Unlimited 3.6L V6 4WD (Dual Split Rear Exit)
- 2018 Jeep Wrangler JKU: 4-Door Unlimited 3.6L V6 4WD (Dual Split Rear Exit - *JK Generation Only*)
Important Application & Compatibility Notes:
- **Generation Restrictions:** Fits strictly onto the **Wrangler JK and JKU** platform configurations. Does **NOT** fit 2018 or newer Wrangler JL/JLU models.
- **Engine Restrictions:** Engineered exclusively for the **3.6L V6** engine layout. Will **NOT** fit older 3.8L V6 or newer 2.0L Turbo / 3.0L EcoDiesel powerplants.
- **Tip Configuration:** Built as a dual split rear exit layout featuring premium square-profile styling tips that exit symmetrically on the driver and passenger sides of the rear bumper area.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
