BMR A-Arm Kit with Delrin Bushings and Tall Ball Joints (Black Hammertone) - AAK322H - 1970-1981 GM F-Body / 1975-1979 GM X-Body
Improve performance and eliminate A-arm deflection on your 1970-1981 F-Body or 1975-1979 X-Body with an A-arm Kit from BMR Suspension! Factory A-arms and soft bushings can cause severe deflection, resulting in changes in alignment and reduced performance on the track and street. BMR’s A-arm Kit (AAK322), featuring upper (AAU322) and lower A-arms (AAL321), eliminates deflection and is designed for street performance, drag racing, handling, and pro-touring applications. When performance is a must, rely on BMR Suspension!
Constructed from heavy-duty DOM steel tubing paired with laser-cut, CNC-formed steel plate braces, this kit is built to withstand extreme loads. It features greaseable, internally fluted Delrin bushings, new tall ball joints on the upper control arms (AAU322) to dramatically improve the camber curve, preassembled new ball joints and polyurethane bump stops on the lower arms (AAL321), and built-in positive caster for enhanced stability. Finished in a durable black hammertone powdercoat for long-lasting corrosion resistance and great looks, it is proudly designed and manufactured in the USA. BMR recommends its Control Arm Hardware Kit (RH009) for use with this A-arm kit.
Features
- Includes upper (AAU322) and lower (AAL321) control arms
- Designed for vehicles where bump stops are located on the rear sides of the lower A-arms
- Heavy-duty DOM steel tubing construction
- Laser-cut, CNC-formed steel plate braces
- Greaseable, internally fluted Delrin bushings eliminate deflection
- Includes new tall upper ball joints (AAU322) to improve camber curve
- Preassembled with new ball joints and polyurethane bump stops on lower arms (AAL321)
- Non-adjustable design
- Requires less shim stack for negative camber than OE arms
- Two additional degrees of positive caster built into lower and upper A-arms, providing a total of four additional degrees of positive caster in the kit
- Provides additional header clearance over factory arms
- Improves steering feel and response for normal and performance driving
- Designed for street performance, drag racing, handling, and pro-touring applications
- Durable black hammertone powdercoat finish
- 4 to 5-hour installation time
- BMR recommends Control Arm Hardware Kit (RH009) for installation (includes hardware for both upper and lower control arms)
- Fits 1970-1981 GM F-Body and 1975-1979 GM X-Body models
- Proudly designed and manufactured in the USA
Fitment
- 1970 Chevrolet Camaro
- 1971 Chevrolet Camaro
- 1972 Chevrolet Camaro
- 1973 Chevrolet Camaro
- 1974 Chevrolet Camaro
- 1975 Chevrolet Camaro
- 1976 Chevrolet Camaro
- 1977 Chevrolet Camaro
- 1978 Chevrolet Camaro
- 1979 Chevrolet Camaro
- 1980 Chevrolet Camaro
- 1981 Chevrolet Camaro
- 1970 Pontiac Firebird
- 1971 Pontiac Firebird
- 1972 Pontiac Firebird
- 1973 Pontiac Firebird
- 1974 Pontiac Firebird
- 1975 Pontiac Firebird
- 1976 Pontiac Firebird
- 1977 Pontiac Firebird
- 1978 Pontiac Firebird
- 1979 Pontiac Firebird
- 1980 Pontiac Firebird
- 1981 Pontiac Firebird
- 1975 Chevrolet Nova
- 1976 Chevrolet Nova
- 1977 Chevrolet Nova
- 1978 Chevrolet Nova
- 1979 Chevrolet Nova
- 1975 Pontiac Ventura
- 1976 Pontiac Ventura
- 1977 Pontiac Phoenix
- 1978 Pontiac Phoenix
- 1979 Pontiac Phoenix
- 1975 Oldsmobile Omega
- 1976 Oldsmobile Omega
- 1977 Oldsmobile Omega
- 1978 Oldsmobile Omega
- 1979 Oldsmobile Omega
- 1975 Buick Skylark
- 1976 Buick Skylark
- 1977 Buick Skylark
- 1978 Buick Skylark
- 1979 Buick Skylark
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
