Apex SM-10RE 19x12 Forged Wheel - Porsche Center Lock / ET46 / 101mm CB - Satin Black (Porsche) SM10RE1912ET46-CL-PS-NSBK
The Apex SM-10RE was engineered for drivers who demand maximum strength, stiffness, and durability under the most punishing motorsport conditions. As the forged Enduro version of the highly respected SM-10 platform, the SM-10RE was developed specifically for endurance racing, high-downforce applications, slick tire setups, and track-focused Porsche center lock vehicles where conventional lightweight wheels may not survive repeated abuse.
Rather than focusing solely on weight reduction, Apex reinforced critical structural areas throughout the wheel to create one of the strongest motorsport wheels in their lineup. The result is a forged wheel that delivers approximately 30 percent greater strength than the RS version while maintaining sharp steering response, outstanding rigidity, and predictable handling characteristics lap after lap.
Built for Endurance Racing
The SM-10RE features Apexs heavy-duty Enduro Spec inner lip with 50 percent more reinforcement to better withstand aggressive curbing, rough track surfaces, potholes, and repeated race abuse. Apex also strengthened the front lip section for improved durability during harsh track conditions and berm impacts.
Each wheel is manufactured from fully forged 6061-T6 aluminum using an advanced 10,000 ton forging process that improves aluminum density, optimizes grain structure, and reduces porosity for exceptional structural integrity.
Enhanced Stiffness and Driver Feedback
Wheel stiffness plays a major role in steering precision, tire stability, and overall vehicle feel. The SM-10RE utilizes redesigned side-milled spokes that are approximately 20 to 25 percent stiffer than Apex Sprint Line wheels. Increased spoke rigidity helps reduce camber loss under extreme cornering loads while improving steering response, tire contact consistency, and outer shoulder tire wear.
Precision CNC side-milling removes unnecessary material from low-stress areas without compromising strength, helping the SM-10RE remain surprisingly lightweight for an endurance-focused forged wheel.
Motorsport-Focused Engineering
Unlike many forged wheels built from generic third-party blanks, Apex developed proprietary motorsport-specific forging blanks that provide complete control over brake clearance, spoke geometry, concavity, and structural optimization.
Extensive Finite Element Analysis was used during development to strengthen high-load areas while eliminating unnecessary mass from lower-stress regions. The result is a wheel capable of handling severe endurance racing conditions with only a minimal weight increase over lightweight Sprint Line alternatives.
Vehicle-specific spoke profiles and a high-clearance barrel design were developed using 3D laser scans of factory and aftermarket brake systems to maximize big brake compatibility on Porsche center lock applications.
Track-Ready Details
The SM-10RE incorporates numerous race-inspired features including paintless knurled beads that help minimize tire slippage during repeated hard acceleration and braking, paintless barrels that reduce rotational inertia, oversized lug openings compatible with impact sockets and race hardware, and laser-engraved wheel specifications for fast identification during trackside wheel swaps.
Every Apex Enduro Line wheel is independently tested by ITS in Michigan under conditions exceeding standard JWL requirements for additional confidence in high-load motorsport environments.
Specifications
- Part Number: SM10RE1912ET46-CL-PS-NSBK
- Wheel Model: SM-10RE
- Wheel Size: 19x12
- Bolt Pattern: Porsche Center Lock
- Offset: ET46
- Center Bore: 101mm
- Finish: Satin Black
- Construction: Fully Forged 6061-T6 Aluminum
- Forging Process: 10,000 Ton Forged Construction
- Load Rating: 2100 pounds
- Inner Lip Design: Enduro Spec Reinforced Inner Lip
- Spoke Design: Stiffer Side-Milled Spokes
- Hub Design: Capless Hub Design
- Bead Seat: Paintless Knurled Bead
- Brake Clearance: Massive Big Brake Clearance
- Warranty: Lifetime Structural Warranty
- Finish Warranty: 1 Year Finish Warranty
- Replacement Program: Accidental Damage Replacement Program
Features
- Forged Enduro wheel engineered for endurance racing and aggressive track use
- Approximately 30 percent stronger than the RS version
- 20 to 25 percent stiffer spokes improve handling precision and stability
- Heavy-duty Enduro Spec reinforced inner lip
- Reinforced front lip increases durability during harsh impacts
- Fully forged 6061-T6 aluminum construction
- Produced using an advanced 10,000 ton forging process
- FEA-optimized structure balances strength and weight savings
- Deep side-milled spokes reduce rotational mass
- Independently tested beyond standard JWL requirements
- Vehicle-specific spoke profiles developed using 3D scanning technology
- Deep concavity profile optimized for Porsche performance applications
- Paintless knurled bead helps reduce tire slippage
- Paintless barrel reduces rotational inertia
- Capless hub design eliminates unnecessary weight
- Oversized lug openings support impact sockets and race hardware
- CNC-machined outer lip pocketing reduces rotational mass
- Laser-engraved wheel specifications for easy identification
- Lifetime structural warranty included
- Accidental damage replacement support available
Fitment
Designed for Porsche center lock applications utilizing a 101mm center bore configuration.
Commonly used for track-focused Porsche and endurance racing applications.
Always verify brake clearance, suspension clearance, center lock compatibility, and tire sizing before installation.
FAQs
What makes the SM-10RE different from the standard SM-10?
The SM-10RE is Apexs reinforced Enduro version developed specifically for endurance racing and high-load motorsport environments. It features increased load capacity, reinforced lips, stiffer spokes, and additional structural upgrades for maximum durability.
Are these wheels compatible with Porsche center lock systems?
Yes. This specific SM-10RE configuration was engineered for Porsche center lock applications and utilizes a 101mm center bore with Porsche center lock compatibility.
Why Buy from Beefcake Racing?
Beefcake Racing delivers premium performance parts, expert technical support, and competitive pricing for enthusiasts building serious street and track vehicles. Whether you need wheel fitment assistance or complete performance recommendations, our experienced team is ready to help.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
Note: Wheels that have been mounted with tires are considered used and cannot be returned or refunded. Please verify vehicle fitment before placing your order, and always test fit wheels prior to tire mounting.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
