Apex SM-10RE 19x11 Forged Wheel - 5x130 BP / ET48 / 71.6mm CB - Satin Black (Porsche) SM10RE1911ET48-5130-716-NSBK
The Apex SM-10RE was engineered for drivers who demand uncompromising strength, stiffness, and durability under extreme motorsport conditions. As the forged Enduro variant of the popular SM-10 platform, the SM-10RE is purpose-built for endurance racing, track abuse, high-grip tire compounds, and high-downforce Porsche applications where traditional lightweight wheels can become a weak point.
Rather than focusing solely on minimizing weight, Apex reinforced critical structural areas throughout the wheel to dramatically increase durability and rigidity. The result is a wheel that delivers approximately 30 percent greater strength than the RS version while maintaining responsive steering feel, predictable handling, and race-ready performance lap after lap.
Enduro-Level Strength and Durability
The SM-10RE features Apexs heavy-duty Enduro Spec inner lip with 50 percent additional reinforcement to better withstand curbing impacts, rough track surfaces, potholes, and aggressive racing environments. Apex also reinforced the front lip area for additional protection during hard track use and berm strikes.
Constructed from fully forged 6061-T6 aluminum using a massive 10,000 ton forging process, the SM-10RE benefits from increased material density, improved grain structure, and reduced porosity for exceptional structural integrity.
Stiffer Spokes for Better Handling Precision
Wheel rigidity plays a major role in steering feedback and tire stability during aggressive driving. The SM-10RE incorporates redesigned side-milled spokes that are approximately 20 to 25 percent stiffer than Apex Sprint Line wheels. Increased spoke stiffness helps reduce camber loss under load while improving steering response, tire wear consistency, and overall chassis feel.
Precision CNC side-milling removes excess material from low-stress areas while preserving maximum structural strength, allowing the wheel to remain impressively lightweight for its durability class.
Purpose-Built Motorsport Engineering
Unlike many forged wheels built from generic third-party blanks, Apex engineered proprietary motorsport-specific forging blanks to allow complete control over spoke geometry, brake clearance, concavity, and overall wheel optimization.
Advanced Finite Element Analysis was utilized throughout development to reinforce high-stress zones while reducing unnecessary material in lower-load areas. The result is a wheel capable of surviving extreme endurance racing conditions with minimal weight penalty compared to lighter Sprint Line alternatives.
Vehicle-specific spoke profiles and an advanced high-clearance barrel design were developed using 3D scanning technology to maximize compatibility with factory and aftermarket Porsche big brake systems.
Race-Ready Features Throughout
The SM-10RE incorporates numerous motorsport-focused details including paintless knurled beads that help reduce tire slippage during repeated hard acceleration and braking, paintless barrels that reduce rotational inertia, oversized lug openings compatible with race lugs and impact sockets, and laser-engraved wheel specifications for quick identification during trackside wheel changes.
Each Enduro Line wheel is independently tested by ITS in Michigan under conditions that exceed standard JWL testing requirements for additional confidence during demanding track use.
Specifications
- Part Number: SM10RE1911ET48-5130-716-NSBK
- Wheel Model: SM-10RE
- Wheel Size: 19x11
- Bolt Pattern: 5x130 BP
- Offset: ET48
- Center Bore: 71.6mm
- Finish: Satin Black
- Construction: Fully Forged 6061-T6 Aluminum
- Forging Process: 10,000 Ton Forged Construction
- Load Rating: 2100 pounds
- Inner Lip Design: Enduro Spec Reinforced Inner Lip
- Spoke Design: Stiffer Side-Milled Spokes
- Hub Design: Capless Hub Design
- Bead Seat: Paintless Knurled Bead
- Brake Clearance: Massive Big Brake Clearance
- Warranty: Lifetime Structural Warranty
- Finish Warranty: 1 Year Finish Warranty
- Replacement Program: Accidental Damage Replacement Program
Features
- Forged Enduro wheel engineered for endurance racing and aggressive track use
- Approximately 30 percent stronger than the RS version
- 20 to 25 percent stiffer spokes improve steering precision and tire stability
- Heavy-duty Enduro Spec reinforced inner lip
- Reinforced front lip improves impact durability
- Fully forged 6061-T6 aluminum construction
- Produced using an advanced 10,000 ton forging process
- FEA-optimized structure balances strength and weight reduction
- Deep side-milled spokes reduce unnecessary rotational mass
- Independently tested beyond standard JWL requirements
- Vehicle-specific spoke profiles developed using 3D scanning technology
- Deep concavity profile engineered for performance applications
- Paintless knurled bead reduces tire slippage
- Paintless barrel reduces rotational inertia
- Capless hub design removes unnecessary weight
- Oversized lug openings support impact sockets and race lugs
- CNC-machined outer lip pocketing reduces rotational mass
- Laser-engraved wheel specifications for quick identification
- Lifetime structural warranty included
- Accidental damage replacement support available
Fitment
Applications utilizing 5x130 BP and 71.6mm CB configurations.
Commonly used for Porsche performance and track-focused Porsche applications.
Always verify brake clearance, suspension clearance, wheel offset, and tire sizing before installation.
FAQs
What makes the SM-10RE different from the standard SM-10?
The SM-10RE is Apexs reinforced Enduro version designed specifically for endurance racing and high-load track environments. It features increased load capacity, stiffer spokes, reinforced lips, and additional structural enhancements for maximum durability.
Will the SM-10RE clear big brake kits?
Yes. Apex engineered the SM-10RE using vehicle-specific spoke profiles and a high-clearance barrel design to maximize compatibility with many factory and aftermarket Porsche big brake systems.
Why Buy from Beefcake Racing?
Beefcake Racing provides premium performance parts, knowledgeable customer support, and competitive pricing for enthusiasts building serious street and track vehicles. Whether you need wheel fitment guidance or complete performance recommendations, our experienced team is ready to help.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
Note: Wheels that have been mounted with tires are considered used and cannot be returned or refunded. Please verify vehicle fitment before placing your order, and always test fit wheels prior to tire mounting.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
